On Wed, Feb 8, 2017 at 9:40 AM, <eajames@xxxxxxxxxxxxxxxxxx> wrote:
> From: "Edward A. James" <eajames@xxxxxxxxxx>
>
> Add functions to parse the data structures that are specific to the OCC on
> the POWER8 processor. These are the sensor data structures, including
> temperature, frequency, power, and "caps."
>
> Signed-off-by: Edward A. James <eajames@xxxxxxxxxx>
> Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx>
> ---
> Documentation/hwmon/occ | 9 ++
> drivers/hwmon/occ/occ_p8.c | 248 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/hwmon/occ/occ_p8.h | 30 ++++++
> 3 files changed, 287 insertions(+)
> create mode 100644 drivers/hwmon/occ/occ_p8.c
> create mode 100644 drivers/hwmon/occ/occ_p8.h
>
> diff --git a/drivers/hwmon/occ/occ_p8.c b/drivers/hwmon/occ/occ_p8.c
> new file mode 100644
> index 0000000..5c61fc4
> --- /dev/null
> +++ b/drivers/hwmon/occ/occ_p8.c
> +void p8_parse_sensor(u8 *data, void *sensor, int sensor_type, int off,
> + int snum)
> +{
> + switch (sensor_type) {
> + case FREQ:
> + case TEMP:
> + {
> + struct p8_occ_sensor *os =
> + &(((struct p8_occ_sensor *)sensor)[snum]);
> +
> + os->sensor_id = be16_to_cpu(get_unaligned((u16 *)&data[off]));
> + os->value = be16_to_cpu(get_unaligned((u16 *)&data[off + 2]));
> + }
> + break;
> + case POWER:
> + {
> + struct p8_power_sensor *ps =
> + &(((struct p8_power_sensor *)sensor)[snum]);
> +
> + ps->sensor_id = be16_to_cpu(get_unaligned((u16 *)&data[off]));
> + ps->update_tag =
> + be32_to_cpu(get_unaligned((u32 *)&data[off + 2]));
This might be more readable if you wrote a
cast_get_unaliged_be32_to_cpu() macro.
> + ps->accumulator =
> + be32_to_cpu(get_unaligned((u32 *)&data[off + 6]));
> + ps->value = be16_to_cpu(get_unaligned((u16 *)&data[off + 10]));
> + }
> + break;
> + case CAPS:
> + {
> +const u32 *p8_get_sensor_hwmon_configs()
> +{
> + return p8_sensor_hwmon_configs;
> +}
> +EXPORT_SYMBOL(p8_get_sensor_hwmon_configs);
> +
> +struct occ *p8_occ_start(struct device *dev, void *bus,
> + struct occ_bus_ops *bus_ops)
> +{
> + return occ_start(dev, bus, bus_ops, &p8_ops, &p8_config);
> +}
> +EXPORT_SYMBOL(p8_occ_start);
We don't need to export these symbols; they're not used outside of the
OCC module. The same goes for all of the exports you've made in this
series.
I suggest we re-architect the drivers so we build all of the objects
and link them into one module for each platform, instead of having an
occ module and occ-p8/occ-p9 modules and i2c modules that all depend
on each other. The Makefile could look like this:
obj-$(CONFIG_SENSORS_PPC_OCC_P8_I2C) += hwmon_occ_p8.o
obj-$(CONFIG_SENSORS_PPC_OCC_P9) += hwmon_occ_p9.o
hwmon_occ_p8-$(CONFIG_SENSORS_PPC_OCC_P8_I2C) += occ_scom_i2c.o
occ_p8.o p8_occ_i2c.o occ_sysfs.o occ.o
hwmon_occ_p9-$(CONFIG_SENSORS_PPC_OCC_P9) += occ_p9.o occ_sysfs.o occ.o
And the Kbuild like this:
menuconfig SENSORS_PPC_OCC
bool "PPC On-Chip Controller"
if SENSORS_PPC_OCC
config SENSORS_PPC_OCC_P8_I2C
bool "POWER8 OCC hwmon support"
depends on I2C
config SENSORS_PPC_OCC_P9
bool "POWER9 OCC hwmon support"
endif
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
