On Wed, Jan 18, 2017 at 04:57:10PM +0100, Peter Rosin wrote: > Describe how a generic multiplexer controller is used to mux an i2c bus. > > Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx> > Signed-off-by: Peter Rosin <peda@xxxxxxxxxx> > --- > .../devicetree/bindings/i2c/i2c-mux-simple.txt | 81 ++++++++++++++++++++++ > 1 file changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-simple.txt > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-simple.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-simple.txt > new file mode 100644 > index 000000000000..253d5027843b > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-simple.txt > @@ -0,0 +1,81 @@ > +Simple I2C Bus Mux > + > +This binding describes an I2C bus multiplexer that uses a mux controller > +from the mux subsystem to route the I2C signals. > + > + .-----. .-----. > + | dev | | dev | > + .------------. '-----' '-----' > + | SoC | | | > + | | .--------+--------' > + | .------. | .------+ child bus A, on MUX value set to 0 > + | | I2C |-|--| Mux | > + | '------' | '--+---+ child bus B, on MUX value set to 1 > + | .------. | | '----------+--------+--------. > + | | MUX- | | | | | | > + | | Ctrl |-|-----+ .-----. .-----. .-----. > + | '------' | | dev | | dev | | dev | > + '------------' '-----' '-----' '-----' > + > +Required properties: > +- compatible: i2c-mux-simple,mux-locked or i2c-mux-simple,parent-locked Not a fan of using "simple" nor the ','. Perhaps lock type should be separate property. I'm not sure I get the mux vs. parent locked fully. How do I determine what type I have? We already have bindings for several types of i2c muxes. How does the locking annotation fit into those? Rob -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
