[PATCH v8 6/8] thunderbolt: Kconfig for Thunderbolt Networking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update to the Kconfig Thunderbolt description to add
Thunderbolt networking as an option.
The menu item "Thunderbolt support" now offers:
"Apple Hardware Support" (existing)
        and/or
"Thunderbolt Networking" (new)

You can choose the driver for your platform or build both drivers -
each driver will detect if it can run on the specific platform.
If the Thunderbolt Networking option is chosen, Thunderbolt Networking
will be enabled between Linux non-Apple systems, macOS and
Windows based systems.
Thunderbolt Networking will not affect any other Thunderbolt feature that
was previous available to Linux users on either Apple or
non-Apple platforms.

Signed-off-by: Amir Levy <amir.jer.levy@xxxxxxxxx>
---
 drivers/thunderbolt/Kconfig  | 27 +++++++++++++++++++++++----
 drivers/thunderbolt/Makefile |  3 ++-
 2 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/thunderbolt/Kconfig b/drivers/thunderbolt/Kconfig
index c121acc..376e5bb 100644
--- a/drivers/thunderbolt/Kconfig
+++ b/drivers/thunderbolt/Kconfig
@@ -1,13 +1,32 @@
-menuconfig THUNDERBOLT
-	tristate "Thunderbolt support for Apple devices"
+config THUNDERBOLT
+	tristate "Thunderbolt support"
 	depends on PCI
 	select CRC32
 	help
-	  Cactus Ridge Thunderbolt Controller driver
+	  Thunderbolt Controller driver
+
+if THUNDERBOLT
+
+config THUNDERBOLT_APPLE
+	tristate "Apple hardware support"
+	help
 	  This driver is required if you want to hotplug Thunderbolt devices on
 	  Apple hardware.
 
 	  Device chaining is currently not supported.
 
-	  To compile this driver a module, choose M here. The module will be
+	  To compile this driver as a module, choose M here. The module will be
 	  called thunderbolt.
+
+config THUNDERBOLT_ICM
+	tristate "Thunderbolt Networking"
+	help
+	  This driver is required if you want Thunderbolt Networking on
+	  non-Apple hardware.
+	  It creates a virtual Ethernet device that enables computer to
+	  computer communication over a Thunderbolt cable.
+
+	  To compile this driver as a module, choose M here. The module will be
+	  called thunderbolt_icm.
+
+endif
diff --git a/drivers/thunderbolt/Makefile b/drivers/thunderbolt/Makefile
index 5d1053c..b6aa6a3 100644
--- a/drivers/thunderbolt/Makefile
+++ b/drivers/thunderbolt/Makefile
@@ -1,3 +1,4 @@
-obj-${CONFIG_THUNDERBOLT} := thunderbolt.o
+obj-${CONFIG_THUNDERBOLT_APPLE} := thunderbolt.o
 thunderbolt-objs := nhi.o ctl.o tb.o switch.o cap.o path.o tunnel_pci.o eeprom.o
 
+obj-${CONFIG_THUNDERBOLT_ICM} += icm/
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux