[PATCH v4 06/29] Documentation/applying-patches.txt: convert it to ReST markup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



- use the correct markup to identify each section;

- Add some blank lines for Sphinx to properly interpret
  the markups;

- Remove a blank space on some paragraphs;

- Fix the verbatim and bold markups;

- Cleanup the remaining errors to make Sphinx happy.

Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
 Documentation/applying-patches.txt | 311 ++++++++++++++++++++++---------------
 1 file changed, 189 insertions(+), 122 deletions(-)

diff --git a/Documentation/applying-patches.txt b/Documentation/applying-patches.txt
index 77df55b0225a..573eb3bee19e 100644
--- a/Documentation/applying-patches.txt
+++ b/Documentation/applying-patches.txt
@@ -1,9 +1,12 @@
 
-	Applying Patches To The Linux Kernel
-	------------------------------------
+Applying Patches To The Linux Kernel
+++++++++++++++++++++++++++++++++++++
 
-	Original by: Jesper Juhl, August 2005
-	Last update: 2006-01-05
+Original by:
+	Jesper Juhl, August 2005
+
+Last update:
+	2006-01-05
 
 
 A frequently asked question on the Linux Kernel Mailing List is how to apply
@@ -17,10 +20,12 @@ their specific patches) is also provided.
 
 
 What is a patch?
----
- A patch is a small text document containing a delta of changes between two
-different versions of a source tree. Patches are created with the `diff'
+================
+
+A patch is a small text document containing a delta of changes between two
+different versions of a source tree. Patches are created with the ``diff``
 program.
+
 To correctly apply a patch you need to know what base it was generated from
 and what new version the patch will change the source tree into. These
 should both be present in the patch file metadata or be possible to deduce
@@ -28,8 +33,9 @@ from the filename.
 
 
 How do I apply or revert a patch?
----
- You apply a patch with the `patch' program. The patch program reads a diff
+=================================
+
+You apply a patch with the ``patch`` program. The patch program reads a diff
 (or patch) file and makes the changes to the source tree described in it.
 
 Patches for the Linux kernel are generated relative to the parent directory
@@ -38,26 +44,39 @@ holding the kernel source dir.
 This means that paths to files inside the patch file contain the name of the
 kernel source directories it was generated against (or some other directory
 names like "a/" and "b/").
+
 Since this is unlikely to match the name of the kernel source dir on your
 local machine (but is often useful info to see what version an otherwise
 unlabeled patch was generated against) you should change into your kernel
 source directory and then strip the first element of the path from filenames
-in the patch file when applying it (the -p1 argument to `patch' does this).
+in the patch file when applying it (the ``-p1`` argument to ``patch`` does
+this).
 
 To revert a previously applied patch, use the -R argument to patch.
 So, if you applied a patch like this:
+
+::
+
 	patch -p1 < ../patch-x.y.z
 
 You can revert (undo) it like this:
+
+::
+
 	patch -R -p1 < ../patch-x.y.z
 
 
-How do I feed a patch/diff file to `patch'?
----
- This (as usual with Linux and other UNIX like operating systems) can be
+How do I feed a patch/diff file to ``patch``?
+=============================================
+
+This (as usual with Linux and other UNIX like operating systems) can be
 done in several different ways.
+
 In all the examples below I feed the file (in uncompressed form) to patch
 via stdin using the following syntax:
+
+::
+
 	patch -p1 < path/to/patch-x.y.z
 
 If you just want to be able to follow the examples below and don't want to
@@ -66,34 +85,45 @@ section here.
 
 Patch can also get the name of the file to use via the -i argument, like
 this:
+
+::
+
 	patch -p1 -i path/to/patch-x.y.z
 
 If your patch file is compressed with gzip or bzip2 and you don't want to
 uncompress it before applying it, then you can feed it to patch like this
 instead:
+
+::
+
 	zcat path/to/patch-x.y.z.gz | patch -p1
 	bzcat path/to/patch-x.y.z.bz2 | patch -p1
 
 If you wish to uncompress the patch file by hand first before applying it
 (what I assume you've done in the examples below), then you simply run
 gunzip or bunzip2 on the file -- like this:
+
+::
+
 	gunzip patch-x.y.z.gz
 	bunzip2 patch-x.y.z.bz2
 
 Which will leave you with a plain text patch-x.y.z file that you can feed to
-patch via stdin or the -i argument, as you prefer.
+patch via stdin or the ``-i`` argument, as you prefer.
 
-A few other nice arguments for patch are -s which causes patch to be silent
+A few other nice arguments for patch are ``-s`` which causes patch to be silent
 except for errors which is nice to prevent errors from scrolling out of the
-screen too fast, and --dry-run which causes patch to just print a listing of
-what would happen, but doesn't actually make any changes. Finally --verbose
+screen too fast, and ``--dry-run`` which causes patch to just print a listing of
+what would happen, but doesn't actually make any changes. Finally ``--verbose``
 tells patch to print more information about the work being done.
 
 
 Common errors when patching
----
- When patch applies a patch file it attempts to verify the sanity of the
+===========================
+
+When patch applies a patch file it attempts to verify the sanity of the
 file in different ways.
+
 Checking that the file looks like a valid patch file and checking the code
 around the bits being modified matches the context provided in the patch are
 just two of the basic sanity checks patch does.
@@ -111,13 +141,13 @@ everything looks good it has just moved up or down a bit, and patch will
 usually adjust the line numbers and apply the patch.
 
 Whenever patch applies a patch that it had to modify a bit to make it fit
-it'll tell you about it by saying the patch applied with 'fuzz'.
+it'll tell you about it by saying the patch applied with **fuzz**.
 You should be wary of such changes since even though patch probably got it
 right it doesn't /always/ get it right, and the result will sometimes be
 wrong.
 
 When patch encounters a change that it can't fix up with fuzz it rejects it
-outright and leaves a file with a .rej extension (a reject file). You can
+outright and leaves a file with a ``.rej`` extension (a reject file). You can
 read this file to see exactly what change couldn't be applied, so you can
 go fix it up by hand if you wish.
 
@@ -132,43 +162,47 @@ to start with a fresh tree downloaded in full from kernel.org.
 
 Let's look a bit more at some of the messages patch can produce.
 
-If patch stops and presents a "File to patch:" prompt, then patch could not
+If patch stops and presents a ``File to patch:`` prompt, then patch could not
 find a file to be patched. Most likely you forgot to specify -p1 or you are
 in the wrong directory. Less often, you'll find patches that need to be
-applied with -p0 instead of -p1 (reading the patch file should reveal if
+applied with ``-p0`` instead of ``-p1`` (reading the patch file should reveal if
 this is the case -- if so, then this is an error by the person who created
 the patch but is not fatal).
 
-If you get "Hunk #2 succeeded at 1887 with fuzz 2 (offset 7 lines)." or a
+If you get ``Hunk #2 succeeded at 1887 with fuzz 2 (offset 7 lines).`` or a
 message similar to that, then it means that patch had to adjust the location
 of the change (in this example it needed to move 7 lines from where it
 expected to make the change to make it fit).
+
 The resulting file may or may not be OK, depending on the reason the file
 was different than expected.
+
 This often happens if you try to apply a patch that was generated against a
 different kernel version than the one you are trying to patch.
 
-If you get a message like "Hunk #3 FAILED at 2387.", then it means that the
+If you get a message like ``Hunk #3 FAILED at 2387.``, then it means that the
 patch could not be applied correctly and the patch program was unable to
-fuzz its way through. This will generate a .rej file with the change that
-caused the patch to fail and also a .orig file showing you the original
+fuzz its way through. This will generate a ``.rej`` file with the change that
+caused the patch to fail and also a ``.orig`` file showing you the original
 content that couldn't be changed.
 
-If you get "Reversed (or previously applied) patch detected!  Assume -R? [n]"
+If you get ``Reversed (or previously applied) patch detected!  Assume -R? [n]``
 then patch detected that the change contained in the patch seems to have
 already been made.
+
 If you actually did apply this patch previously and you just re-applied it
 in error, then just say [n]o and abort this patch. If you applied this patch
 previously and actually intended to revert it, but forgot to specify -R,
-then you can say [y]es here to make patch revert it for you.
+then you can say [**y**]es here to make patch revert it for you.
+
 This can also happen if the creator of the patch reversed the source and
 destination directories when creating the patch, and in that case reverting
 the patch will in fact apply it.
 
-A message similar to "patch: **** unexpected end of file in patch" or "patch
-unexpectedly ends in middle of line" means that patch could make no sense of
-the file you fed to it. Either your download is broken, you tried to feed
-patch a compressed patch file without uncompressing it first, or the patch
+A message similar to ``patch: **** unexpected end of file in patch`` or
+``patch unexpectedly ends in middle of line`` means that patch could make no
+sense of the file you fed to it. Either your download is broken, you tried to
+feed patch a compressed patch file without uncompressing it first, or the patch
 file that you are using has been mangled by a mail client or mail transfer
 agent along the way somewhere, e.g., by splitting a long line into two lines.
 Often these warnings can easily be fixed by joining (concatenating) the
@@ -182,28 +216,34 @@ to start over with a fresh download of a full kernel tree and the patch you
 wish to apply.
 
 
-Are there any alternatives to `patch'?
----
- Yes there are alternatives.
+Are there any alternatives to ``patch``?
+========================================
 
- You can use the `interdiff' program (http://cyberelk.net/tim/patchutils/) to
+
+Yes there are alternatives.
+
+You can use the ``interdiff`` program (http://cyberelk.net/tim/patchutils/) to
 generate a patch representing the differences between two patches and then
 apply the result.
+
 This will let you move from something like 2.6.12.2 to 2.6.12.3 in a single
 step. The -z flag to interdiff will even let you feed it patches in gzip or
 bzip2 compressed form directly without the use of zcat or bzcat or manual
 decompression.
 
 Here's how you'd go from 2.6.12.2 to 2.6.12.3 in a single step:
+
+::
+
 	interdiff -z ../patch-2.6.12.2.bz2 ../patch-2.6.12.3.gz | patch -p1
 
 Although interdiff may save you a step or two you are generally advised to
 do the additional steps since interdiff can get things wrong in some cases.
 
- Another alternative is `ketchup', which is a python script for automatic
+Another alternative is ``ketchup``, which is a python script for automatic
 downloading and applying of patches (http://www.selenic.com/ketchup/).
 
- Other nice tools are diffstat, which shows a summary of changes made by a
+Other nice tools are diffstat, which shows a summary of changes made by a
 patch; lsdiff, which displays a short listing of affected files in a patch
 file, along with (optionally) the line numbers of the start of each patch;
 and grepdiff, which displays a list of the files modified by a patch where
@@ -211,24 +251,29 @@ the patch contains a given regular expression.
 
 
 Where can I download the patches?
----
- The patches are available at http://kernel.org/
+=================================
+
+The patches are available at http://kernel.org/
 Most recent patches are linked from the front page, but they also have
 specific homes.
 
 The 2.6.x.y (-stable) and 2.6.x patches live at
- ftp://ftp.kernel.org/pub/linux/kernel/v2.6/
+
+	ftp://ftp.kernel.org/pub/linux/kernel/v2.6/
 
 The -rc patches live at
- ftp://ftp.kernel.org/pub/linux/kernel/v2.6/testing/
+
+	ftp://ftp.kernel.org/pub/linux/kernel/v2.6/testing/
 
 The -git patches live at
- ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/
+
+	ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/
 
 The -mm kernels live at
- ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/
 
-In place of ftp.kernel.org you can use ftp.cc.kernel.org, where cc is a
+	ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/
+
+In place of ``ftp.kernel.org`` you can use ``ftp.cc.kernel.org``, where cc is a
 country code. This way you'll be downloading from a mirror site that's most
 likely geographically closer to you, resulting in faster downloads for you,
 less bandwidth used globally and less load on the main kernel.org servers --
@@ -236,8 +281,9 @@ these are good things, so do use mirrors when possible.
 
 
 The 2.6.x kernels
----
- These are the base stable releases released by Linus. The highest numbered
+=================
+
+These are the base stable releases released by Linus. The highest numbered
 release is the most recent.
 
 If regressions or other serious flaws are found, then a -stable fix patch
@@ -246,30 +292,33 @@ kernel is released, a patch is made available that is a delta between the
 previous 2.6.x kernel and the new one.
 
 To apply a patch moving from 2.6.11 to 2.6.12, you'd do the following (note
-that such patches do *NOT* apply on top of 2.6.x.y kernels but on top of the
+that such patches do **NOT** apply on top of 2.6.x.y kernels but on top of the
 base 2.6.x kernel -- if you need to move from 2.6.x.y to 2.6.x+1 you need to
 first revert the 2.6.x.y patch).
 
 Here are some examples:
 
-# moving from 2.6.11 to 2.6.12
-$ cd ~/linux-2.6.11			# change to kernel source dir
-$ patch -p1 < ../patch-2.6.12		# apply the 2.6.12 patch
-$ cd ..
-$ mv linux-2.6.11 linux-2.6.12		# rename source dir
+::
 
-# moving from 2.6.11.1 to 2.6.12
-$ cd ~/linux-2.6.11.1			# change to kernel source dir
-$ patch -p1 -R < ../patch-2.6.11.1	# revert the 2.6.11.1 patch
-					# source dir is now 2.6.11
-$ patch -p1 < ../patch-2.6.12		# apply new 2.6.12 patch
-$ cd ..
-$ mv linux-2.6.11.1 linux-2.6.12		# rename source dir
+	# moving from 2.6.11 to 2.6.12
+	$ cd ~/linux-2.6.11			# change to kernel source dir
+	$ patch -p1 < ../patch-2.6.12		# apply the 2.6.12 patch
+	$ cd ..
+	$ mv linux-2.6.11 linux-2.6.12		# rename source dir
+
+	# moving from 2.6.11.1 to 2.6.12
+	$ cd ~/linux-2.6.11.1			# change to kernel source dir
+	$ patch -p1 -R < ../patch-2.6.11.1	# revert the 2.6.11.1 patch
+						# source dir is now 2.6.11
+	$ patch -p1 < ../patch-2.6.12		# apply new 2.6.12 patch
+	$ cd ..
+	$ mv linux-2.6.11.1 linux-2.6.12	# rename source dir
 
 
 The 2.6.x.y kernels
----
- Kernels with 4-digit versions are -stable kernels. They contain small(ish)
+===================
+
+Kernels with 4-digit versions are -stable kernels. They contain small(ish)
 critical fixes for security problems or significant regressions discovered
 in a given 2.6.x kernel.
 
@@ -280,30 +329,35 @@ versions.
 If no 2.6.x.y kernel is available, then the highest numbered 2.6.x kernel is
 the current stable kernel.
 
- note: the -stable team usually do make incremental patches available as well
+.. note::
+
+ The -stable team usually do make incremental patches available as well
  as patches against the latest mainline release, but I only cover the
  non-incremental ones below. The incremental ones can be found at
  ftp://ftp.kernel.org/pub/linux/kernel/v2.6/incr/
 
 These patches are not incremental, meaning that for example the 2.6.12.3
 patch does not apply on top of the 2.6.12.2 kernel source, but rather on top
-of the base 2.6.12 kernel source .
+of the base 2.6.12 kernel source.
+
 So, in order to apply the 2.6.12.3 patch to your existing 2.6.12.2 kernel
 source you have to first back out the 2.6.12.2 patch (so you are left with a
 base 2.6.12 kernel source) and then apply the new 2.6.12.3 patch.
 
 Here's a small example:
 
-$ cd ~/linux-2.6.12.2			# change into the kernel source dir
-$ patch -p1 -R < ../patch-2.6.12.2	# revert the 2.6.12.2 patch
-$ patch -p1 < ../patch-2.6.12.3		# apply the new 2.6.12.3 patch
-$ cd ..
-$ mv linux-2.6.12.2 linux-2.6.12.3	# rename the kernel source dir
+::
 
+	$ cd ~/linux-2.6.12.2			# change to the kernel source dir
+	$ patch -p1 -R < ../patch-2.6.12.2	# revert the 2.6.12.2 patch
+	$ patch -p1 < ../patch-2.6.12.3		# apply the new 2.6.12.3 patch
+	$ cd ..
+	$ mv linux-2.6.12.2 linux-2.6.12.3	# rename the kernel source dir
 
 The -rc kernels
----
- These are release-candidate kernels. These are development kernels released
+===============
+
+These are release-candidate kernels. These are development kernels released
 by Linus whenever he deems the current git (the kernel's source management
 tool) tree to be in a reasonably sane state adequate for testing.
 
@@ -321,35 +375,39 @@ The -rc patches are not incremental, they apply to a base 2.6.x kernel, just
 like the 2.6.x.y patches described above. The kernel version before the -rcN
 suffix denotes the version of the kernel that this -rc kernel will eventually
 turn into.
+
 So, 2.6.13-rc5 means that this is the fifth release candidate for the 2.6.13
 kernel and the patch should be applied on top of the 2.6.12 kernel source.
 
 Here are 3 examples of how to apply these patches:
 
-# first an example of moving from 2.6.12 to 2.6.13-rc3
-$ cd ~/linux-2.6.12			# change into the 2.6.12 source dir
-$ patch -p1 < ../patch-2.6.13-rc3	# apply the 2.6.13-rc3 patch
-$ cd ..
-$ mv linux-2.6.12 linux-2.6.13-rc3	# rename the source dir
+::
 
-# now let's move from 2.6.13-rc3 to 2.6.13-rc5
-$ cd ~/linux-2.6.13-rc3			# change into the 2.6.13-rc3 dir
-$ patch -p1 -R < ../patch-2.6.13-rc3	# revert the 2.6.13-rc3 patch
-$ patch -p1 < ../patch-2.6.13-rc5	# apply the new 2.6.13-rc5 patch
-$ cd ..
-$ mv linux-2.6.13-rc3 linux-2.6.13-rc5	# rename the source dir
+	# first an example of moving from 2.6.12 to 2.6.13-rc3
+	$ cd ~/linux-2.6.12			# change to the 2.6.12 source dir
+	$ patch -p1 < ../patch-2.6.13-rc3	# apply the 2.6.13-rc3 patch
+	$ cd ..
+	$ mv linux-2.6.12 linux-2.6.13-rc3	# rename the source dir
 
-# finally let's try and move from 2.6.12.3 to 2.6.13-rc5
-$ cd ~/linux-2.6.12.3			# change to the kernel source dir
-$ patch -p1 -R < ../patch-2.6.12.3	# revert the 2.6.12.3 patch
-$ patch -p1 < ../patch-2.6.13-rc5	# apply new 2.6.13-rc5 patch
-$ cd ..
-$ mv linux-2.6.12.3 linux-2.6.13-rc5	# rename the kernel source dir
+	# now let's move from 2.6.13-rc3 to 2.6.13-rc5
+	$ cd ~/linux-2.6.13-rc3			# change to the 2.6.13-rc3 dir
+	$ patch -p1 -R < ../patch-2.6.13-rc3	# revert the 2.6.13-rc3 patch
+	$ patch -p1 < ../patch-2.6.13-rc5	# apply the new 2.6.13-rc5 patch
+	$ cd ..
+	$ mv linux-2.6.13-rc3 linux-2.6.13-rc5	# rename the source dir
+
+	# finally let's try and move from 2.6.12.3 to 2.6.13-rc5
+	$ cd ~/linux-2.6.12.3			# change to the kernel source dir
+	$ patch -p1 -R < ../patch-2.6.12.3	# revert the 2.6.12.3 patch
+	$ patch -p1 < ../patch-2.6.13-rc5	# apply new 2.6.13-rc5 patch
+	$ cd ..
+	$ mv linux-2.6.12.3 linux-2.6.13-rc5	# rename the kernel source dir
 
 
 The -git kernels
----
- These are daily snapshots of Linus' kernel tree (managed in a git
+================
+
+These are daily snapshots of Linus' kernel tree (managed in a git
 repository, hence the name).
 
 These patches are usually released daily and represent the current state of
@@ -364,35 +422,40 @@ named 2.6.13-rc3-git2 applies to the source of the 2.6.13-rc3 kernel.
 
 Here are some examples of how to apply these patches:
 
-# moving from 2.6.12 to 2.6.12-git1
-$ cd ~/linux-2.6.12			# change to the kernel source dir
-$ patch -p1 < ../patch-2.6.12-git1	# apply the 2.6.12-git1 patch
-$ cd ..
-$ mv linux-2.6.12 linux-2.6.12-git1	# rename the kernel source dir
+::
 
-# moving from 2.6.12-git1 to 2.6.13-rc2-git3
-$ cd ~/linux-2.6.12-git1		# change to the kernel source dir
-$ patch -p1 -R < ../patch-2.6.12-git1	# revert the 2.6.12-git1 patch
-					# we now have a 2.6.12 kernel
-$ patch -p1 < ../patch-2.6.13-rc2	# apply the 2.6.13-rc2 patch
-					# the kernel is now 2.6.13-rc2
-$ patch -p1 < ../patch-2.6.13-rc2-git3	# apply the 2.6.13-rc2-git3 patch
-					# the kernel is now 2.6.13-rc2-git3
-$ cd ..
-$ mv linux-2.6.12-git1 linux-2.6.13-rc2-git3	# rename source dir
+	# moving from 2.6.12 to 2.6.12-git1
+	$ cd ~/linux-2.6.12			# change to the kernel source dir
+	$ patch -p1 < ../patch-2.6.12-git1	# apply the 2.6.12-git1 patch
+	$ cd ..
+	$ mv linux-2.6.12 linux-2.6.12-git1	# rename the kernel source dir
+
+	# moving from 2.6.12-git1 to 2.6.13-rc2-git3
+	$ cd ~/linux-2.6.12-git1		# change to the kernel source dir
+	$ patch -p1 -R < ../patch-2.6.12-git1	# revert the 2.6.12-git1 patch
+						# we now have a 2.6.12 kernel
+	$ patch -p1 < ../patch-2.6.13-rc2	# apply the 2.6.13-rc2 patch
+						# the kernel is now 2.6.13-rc2
+	$ patch -p1 < ../patch-2.6.13-rc2-git3	# apply the 2.6.13-rc2-git3 patch
+						# the kernel is now 2.6.13-rc2-git3
+	$ cd ..
+	$ mv linux-2.6.12-git1 linux-2.6.13-rc2-git3	# rename source dir
 
 
 The -mm kernels
----
- These are experimental kernels released by Andrew Morton.
+===============
+
+These are experimental kernels released by Andrew Morton.
 
 The -mm tree serves as a sort of proving ground for new features and other
 experimental patches.
+
 Once a patch has proved its worth in -mm for a while Andrew pushes it on to
 Linus for inclusion in mainline.
 
 Although it's encouraged that patches flow to Linus via the -mm tree, this
 is not always enforced.
+
 Subsystem maintainers (or individuals) sometimes push their patches directly
 to Linus, even though (or after) they have been merged and tested in -mm (or
 sometimes even without prior testing in -mm).
@@ -417,31 +480,35 @@ Testing of -mm kernels is greatly appreciated since the whole point of the
 tree is to weed out regressions, crashes, data corruption bugs, build
 breakage (and any other bug in general) before changes are merged into the
 more stable mainline Linus tree.
+
 But testers of -mm should be aware that breakage in this tree is more common
 than in any other tree.
 
 The -mm kernels are not released on a fixed schedule, but usually a few -mm
 kernels are released in between each -rc kernel (1 to 3 is common).
+
 The -mm kernels apply to either a base 2.6.x kernel (when no -rc kernels
 have been released yet) or to a Linus -rc kernel.
 
 Here are some examples of applying the -mm patches:
 
-# moving from 2.6.12 to 2.6.12-mm1
-$ cd ~/linux-2.6.12			# change to the 2.6.12 source dir
-$ patch -p1 < ../2.6.12-mm1		# apply the 2.6.12-mm1 patch
-$ cd ..
-$ mv linux-2.6.12 linux-2.6.12-mm1	# rename the source appropriately
+::
 
-# moving from 2.6.12-mm1 to 2.6.13-rc3-mm3
-$ cd ~/linux-2.6.12-mm1
-$ patch -p1 -R < ../2.6.12-mm1		# revert the 2.6.12-mm1 patch
-					# we now have a 2.6.12 source
-$ patch -p1 < ../patch-2.6.13-rc3	# apply the 2.6.13-rc3 patch
-					# we now have a 2.6.13-rc3 source
-$ patch -p1 < ../2.6.13-rc3-mm3		# apply the 2.6.13-rc3-mm3 patch
-$ cd ..
-$ mv linux-2.6.12-mm1 linux-2.6.13-rc3-mm3	# rename the source dir
+	# moving from 2.6.12 to 2.6.12-mm1
+	$ cd ~/linux-2.6.12			# change to the 2.6.12 source dir
+	$ patch -p1 < ../2.6.12-mm1		# apply the 2.6.12-mm1 patch
+	$ cd ..
+	$ mv linux-2.6.12 linux-2.6.12-mm1	# rename the source appropriately
+
+	# moving from 2.6.12-mm1 to 2.6.13-rc3-mm3
+	$ cd ~/linux-2.6.12-mm1
+	$ patch -p1 -R < ../2.6.12-mm1		# revert the 2.6.12-mm1 patch
+						# we now have a 2.6.12 source
+	$ patch -p1 < ../patch-2.6.13-rc3	# apply the 2.6.13-rc3 patch
+						# we now have a 2.6.13-rc3 source
+	$ patch -p1 < ../2.6.13-rc3-mm3		# apply the 2.6.13-rc3-mm3 patch
+	$ cd ..
+	$ mv linux-2.6.12-mm1 linux-2.6.13-rc3-mm3	# rename the source dir
 
 
 This concludes this list of explanations of the various kernel trees.
-- 
2.7.4


--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux