Re: [RFC PATCH] pci: support for configurable PCI endpoint

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Will resend the series with patch numbering.

Thanks
Kishon

On Tuesday 13 September 2016 10:40 PM, Kishon Vijay Abraham I wrote:
> This patch series
> 	*) adds PCI endpoint core layer
> 	*) modifies designware/dra7xx driver to be configured in EP mode
> 	*) adds a PCI endpoint *test* function driver
> 
> Known Limitation:
> 	*) Does not support multi-function devices
> 
> TODO:
> 	*) access buffers in RC
> 	*) MSI interrupts
> 	*) Enable user space control for the RC side PCI driver
> 	*) Adapt all other users of designware to use the new design
> 
> HOW TO:
> 
> ON THE EP SIDE:
> ***************
> 
> /* EP function is configured using configfs */
> # mount -t configfs none /sys/kernel/config
> 
> /* PCI EP core layer creates "pci_ep" entry in configfs */
> # cd /sys/kernel/config/pci_ep/
> 
> /*
>  * This is the 1st step in creating an endpoint function. This
>  * creates the endpoint function device *instance*. The string
>  * before the .<num> suffix will identify the driver this
>  * EP function will bind to.
>  * Just pci_epf_test is also valid. The .<num> suffix is used
>  * if there are multiple PCI controllers and all of them wants
>  * to use the same function.
>  */
> # mkdir pci_epf_test.0
> 
> /*
>  * When the above command is given, the function device will
>  * also be bound to a function driver. To find the list of
>  * function drivers available in the system, use the following
>  * command. To create a new driver, the following can be referred
>  * drivers/pci/endpoint/functions/pci-epf-test.c
>  */
> # ls /sys/bus/pci-epf/drivers
> pci_epf_test
> 
> /* Now configure the endpoint function */
> # cd pci_epf_test.0
> 
> /* These are the fields that can be configured */
> # ls
> baseclass_code    function          revid             vendorid
> cache_line_size   interrupt_pin     subclass_code
> deviceid          peripheral        subsys_id
> epc               progif_code       subsys_vendor_id
> 
> /* The function driver will populate these fields with default values */
> # cat vendorid 
> 0xffff
> 
> # cat interrupt_pin 
> 0x0001
> 
> /* The user can configure any of these fields */
> # echo 0x104c > vendorid
> 
> /*
>  * Next is binding this function driver to the controller driver. In
>  * order to find the possible controller drivers that this function
>  * driver can be bound to, the following sysfs entry can be used
>  */
> # ls /sys/class/pci_epc/
> 51000000.pci
> 
> /* Now bind the function driver to the controller driver */
> # echo "51000000.pcie" > epc
> [  494.743487] dra7-pcie 51000000.pcie: no free inbound window
> [  494.749367] pci_epf_test pci_epf_test.0: failed to set BAR4
> [  494.755238] dra7-pcie 51000000.pcie: no free inbound window
> [  494.761451] pci_epf_test pci_epf_test.0: failed to set BAR5
> 
> /*
>  * the above error messages are due to non availability of free
>  * inbound windows. So the function drivers in dra7xx can use
>  * only 4 (BAR0..BAR3) BARs
>  */
> 
> /****** PCI endpoint is configured ******/
> 
> ON THE HOST SIDE:
> *****************
> # modprobe pci_endpoint_test
> [    8.197560] ****** Testing pci-endpoint-test Device ******
> [    9.056990] Reset: OKAY
> [    9.059753] BAR1 OKAY
> [    9.062419] BAR2 OKAY
> [    9.069506] BAR3 OKAY
> [    9.071880] BAR4 NOT OKAY
> [    9.074618] BAR5 NOT OKAY
> [    9.379257] Legacy IRQ: OKAY
> [    9.382281] ****** End Test ******
> 
> /*
>  * Rightnow these tests gets executed as soon as the pci_endpoint_test
>  * module gets inserted. These will be modified so that user/user script
>  * can control this. Once the functionality for EP to access RC buffer
>  * is added, more tests can be added including throughput measurement tests.
>  */ 
> 
> 
> Kishon Vijay Abraham I (11):
>   pci: endpoint: add EP core layer to enable EP controller and EP
>     functions
>   pci: endpoint: introduce configfs entry for configuring EP functions
>   Documentation: PCI: guide to use PCI Endpoint Core Layer
>   pci: endpoint: functions: add an EP function to test PCI
>   pci: rename *host* directory to *controller*
>   pci: controller: split designware into *core* and *host*
>   pci: controller: designware: Add EP mode support
>   pci: controller: dra7xx: Add EP mode support
>   misc: add a new host side PCI endpoint test driver
>   ARM: dts: DRA7: Modify pcie1 dt node for EP mode
>   HACK: pci: controller: dra7xx: disable smart idle
> 
>  Documentation/PCI/00-INDEX                         |    5 +
>  Documentation/PCI/pci-endpoint.txt                 |  199 ++++++++++
>  Documentation/PCI/pci-test.txt                     |   79 ++++
>  .../devicetree/bindings/pci/designware-pcie.txt    |   26 +-
>  Documentation/devicetree/bindings/pci/ti-pci.txt   |   30 +-
>  MAINTAINERS                                        |   50 +--
>  arch/arm/boot/dts/dra7.dtsi                        |   43 +--
>  drivers/Makefile                                   |    4 +
>  drivers/misc/Kconfig                               |    7 +
>  drivers/misc/Makefile                              |    1 +
>  drivers/misc/pci_endpoint_test.c                   |  291 +++++++++++++++
>  drivers/pci/Kconfig                                |    3 +-
>  drivers/pci/Makefile                               |    3 -
>  drivers/pci/{host => controller}/Kconfig           |  109 +++++-
>  drivers/pci/{host => controller}/Makefile          |    2 +
>  drivers/pci/{host => controller}/pci-aardvark.c    |    0
>  drivers/pci/{host => controller}/pci-dra7xx.c      |  340 +++++++++++++----
>  drivers/pci/{host => controller}/pci-exynos.c      |    0
>  drivers/pci/{host => controller}/pci-host-common.c |    0
>  .../pci/{host => controller}/pci-host-generic.c    |    0
>  drivers/pci/{host => controller}/pci-hyperv.c      |    0
>  drivers/pci/{host => controller}/pci-imx6.c        |    0
>  drivers/pci/{host => controller}/pci-keystone-dw.c |    0
>  drivers/pci/{host => controller}/pci-keystone.c    |    0
>  drivers/pci/{host => controller}/pci-keystone.h    |    0
>  drivers/pci/{host => controller}/pci-layerscape.c  |    0
>  drivers/pci/{host => controller}/pci-mvebu.c       |    0
>  drivers/pci/{host => controller}/pci-rcar-gen2.c   |    0
>  drivers/pci/{host => controller}/pci-tegra.c       |    0
>  .../pci/{host => controller}/pci-thunder-ecam.c    |    0
>  drivers/pci/{host => controller}/pci-thunder-pem.c |    0
>  drivers/pci/{host => controller}/pci-versatile.c   |    0
>  drivers/pci/{host => controller}/pci-xgene-msi.c   |    0
>  drivers/pci/{host => controller}/pci-xgene.c       |    0
>  drivers/pci/{host => controller}/pcie-altera-msi.c |    0
>  drivers/pci/{host => controller}/pcie-altera.c     |    0
>  drivers/pci/{host => controller}/pcie-armada8k.c   |    0
>  drivers/pci/{host => controller}/pcie-artpec6.c    |    0
>  drivers/pci/controller/pcie-designware-ep.c        |  228 ++++++++++++
>  .../pcie-designware-host.c}                        |  294 +++------------
>  .../{host => controller}/pcie-designware-plat.c    |    0
>  drivers/pci/controller/pcie-designware.c           |  233 ++++++++++++
>  drivers/pci/controller/pcie-designware.h           |  238 ++++++++++++
>  drivers/pci/{host => controller}/pcie-hisi.c       |    0
>  drivers/pci/{host => controller}/pcie-iproc-bcma.c |    0
>  drivers/pci/{host => controller}/pcie-iproc-msi.c  |    0
>  .../pci/{host => controller}/pcie-iproc-platform.c |    0
>  drivers/pci/{host => controller}/pcie-iproc.c      |    0
>  drivers/pci/{host => controller}/pcie-iproc.h      |    0
>  drivers/pci/{host => controller}/pcie-qcom.c       |    0
>  drivers/pci/{host => controller}/pcie-rcar.c       |    0
>  drivers/pci/{host => controller}/pcie-spear13xx.c  |    0
>  drivers/pci/{host => controller}/pcie-xilinx-nwl.c |    0
>  drivers/pci/{host => controller}/pcie-xilinx.c     |    0
>  drivers/pci/endpoint/Kconfig                       |   25 ++
>  drivers/pci/endpoint/Makefile                      |    6 +
>  drivers/pci/endpoint/functions/Kconfig             |   12 +
>  drivers/pci/endpoint/functions/Makefile            |    5 +
>  drivers/pci/endpoint/functions/pci-epf-test.c      |  272 ++++++++++++++
>  drivers/pci/endpoint/pci-ep-cfs.c                  |  275 ++++++++++++++
>  drivers/pci/endpoint/pci-epc-core.c                |  389 ++++++++++++++++++++
>  drivers/pci/endpoint/pci-epf-core.c                |  338 +++++++++++++++++
>  drivers/pci/host/pcie-designware.h                 |   89 -----
>  include/linux/mod_devicetable.h                    |   10 +
>  include/linux/pci-epc.h                            |  100 +++++
>  include/linux/pci-epf.h                            |  159 ++++++++
>  66 files changed, 3373 insertions(+), 492 deletions(-)
>  create mode 100644 Documentation/PCI/pci-endpoint.txt
>  create mode 100644 Documentation/PCI/pci-test.txt
>  create mode 100644 drivers/misc/pci_endpoint_test.c
>  rename drivers/pci/{host => controller}/Kconfig (79%)
>  rename drivers/pci/{host => controller}/Makefile (93%)
>  rename drivers/pci/{host => controller}/pci-aardvark.c (100%)
>  rename drivers/pci/{host => controller}/pci-dra7xx.c (62%)
>  rename drivers/pci/{host => controller}/pci-exynos.c (100%)
>  rename drivers/pci/{host => controller}/pci-host-common.c (100%)
>  rename drivers/pci/{host => controller}/pci-host-generic.c (100%)
>  rename drivers/pci/{host => controller}/pci-hyperv.c (100%)
>  rename drivers/pci/{host => controller}/pci-imx6.c (100%)
>  rename drivers/pci/{host => controller}/pci-keystone-dw.c (100%)
>  rename drivers/pci/{host => controller}/pci-keystone.c (100%)
>  rename drivers/pci/{host => controller}/pci-keystone.h (100%)
>  rename drivers/pci/{host => controller}/pci-layerscape.c (100%)
>  rename drivers/pci/{host => controller}/pci-mvebu.c (100%)
>  rename drivers/pci/{host => controller}/pci-rcar-gen2.c (100%)
>  rename drivers/pci/{host => controller}/pci-tegra.c (100%)
>  rename drivers/pci/{host => controller}/pci-thunder-ecam.c (100%)
>  rename drivers/pci/{host => controller}/pci-thunder-pem.c (100%)
>  rename drivers/pci/{host => controller}/pci-versatile.c (100%)
>  rename drivers/pci/{host => controller}/pci-xgene-msi.c (100%)
>  rename drivers/pci/{host => controller}/pci-xgene.c (100%)
>  rename drivers/pci/{host => controller}/pcie-altera-msi.c (100%)
>  rename drivers/pci/{host => controller}/pcie-altera.c (100%)
>  rename drivers/pci/{host => controller}/pcie-armada8k.c (100%)
>  rename drivers/pci/{host => controller}/pcie-artpec6.c (100%)
>  create mode 100644 drivers/pci/controller/pcie-designware-ep.c
>  rename drivers/pci/{host/pcie-designware.c => controller/pcie-designware-host.c} (64%)
>  rename drivers/pci/{host => controller}/pcie-designware-plat.c (100%)
>  create mode 100644 drivers/pci/controller/pcie-designware.c
>  create mode 100644 drivers/pci/controller/pcie-designware.h
>  rename drivers/pci/{host => controller}/pcie-hisi.c (100%)
>  rename drivers/pci/{host => controller}/pcie-iproc-bcma.c (100%)
>  rename drivers/pci/{host => controller}/pcie-iproc-msi.c (100%)
>  rename drivers/pci/{host => controller}/pcie-iproc-platform.c (100%)
>  rename drivers/pci/{host => controller}/pcie-iproc.c (100%)
>  rename drivers/pci/{host => controller}/pcie-iproc.h (100%)
>  rename drivers/pci/{host => controller}/pcie-qcom.c (100%)
>  rename drivers/pci/{host => controller}/pcie-rcar.c (100%)
>  rename drivers/pci/{host => controller}/pcie-spear13xx.c (100%)
>  rename drivers/pci/{host => controller}/pcie-xilinx-nwl.c (100%)
>  rename drivers/pci/{host => controller}/pcie-xilinx.c (100%)
>  create mode 100644 drivers/pci/endpoint/Kconfig
>  create mode 100644 drivers/pci/endpoint/Makefile
>  create mode 100644 drivers/pci/endpoint/functions/Kconfig
>  create mode 100644 drivers/pci/endpoint/functions/Makefile
>  create mode 100644 drivers/pci/endpoint/functions/pci-epf-test.c
>  create mode 100644 drivers/pci/endpoint/pci-ep-cfs.c
>  create mode 100644 drivers/pci/endpoint/pci-epc-core.c
>  create mode 100644 drivers/pci/endpoint/pci-epf-core.c
>  delete mode 100644 drivers/pci/host/pcie-designware.h
>  create mode 100644 include/linux/pci-epc.h
>  create mode 100644 include/linux/pci-epf.h
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux