Add endpoint mode support to designware driver. This uses the
EP Core layer introduced recently to add endpoint mode support.
*Any* function driver can now use this designware device
to achieve the EP functionality.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
.../devicetree/bindings/pci/designware-pcie.txt | 26 ++-
drivers/pci/controller/Kconfig | 5 +
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pcie-designware-ep.c | 228 ++++++++++++++++++++
drivers/pci/controller/pcie-designware.c | 30 +++
drivers/pci/controller/pcie-designware.h | 45 ++++
6 files changed, 324 insertions(+), 11 deletions(-)
create mode 100644 drivers/pci/controller/pcie-designware-ep.c
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 6c5322c..bb0b789 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -6,23 +6,27 @@ Required properties:
- reg-names: Must be "config" for the PCIe configuration space.
(The old way of getting the configuration address space from "ranges"
is deprecated and should be avoided.)
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map: standard PCI properties
- to define the mapping of the PCIe interface to interrupt
+- #address-cells (only for host mode): set to <3>
+- #size-cells (only for host mode): set to <2>
+- device_type (only for host mode): set to "pci"
+- ranges (only for host mode): ranges for the PCI memory and I/O regions
+- num-ib-windows (only for EP mode): number of inbound address translation
+ windows
+- num-ob-windows (only for EP mode): number of outbound address translation
+ windows
+- #interrupt-cells (only for host mode): set to <1>
+- interrupt-map-mask and interrupt-map (only for host mode): standard PCI
+ properties to define the mapping of the PCIe interface to interrupt
numbers.
- num-lanes: number of lanes to use
Optional properties:
- num-lanes: number of lanes to use (this property should be specified unless
the link is brought already up in BIOS)
-- reset-gpio: gpio pin number of power good signal
-- bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
- specify this property, to keep backwards compatibility a range of 0x00-0xff
- is assumed if not present)
+- reset-gpio (only for host mode): gpio pin number of power good signal
+- bus-range (only for host mode): PCI bus numbers covered (it is recommended
+ for new devicetrees to specify this property, to keep backwards compatibility
+ a range of 0x00-0xff is assumed if not present)
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 249db74..8574828 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -78,6 +78,11 @@ config PCIE_DW_HOST
depends on PCI
select PCIE_DW
+config PCIE_DW_EP
+ bool
+ depends on PCI_ENDPOINT
+ select PCIE_DW
+
config PCI_EXYNOS
bool "Samsung Exynos PCIe controller"
depends on SOC_EXYNOS5440
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index ee6bb85..11ef1e6 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
+obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
diff --git a/drivers/pci/controller/pcie-designware-ep.c b/drivers/pci/controller/pcie-designware-ep.c
new file mode 100644
index 0000000..f683be9
--- /dev/null
+++ b/drivers/pci/controller/pcie-designware-ep.c
@@ -0,0 +1,228 @@
+/**
+ * pci-designware-ep.c - Synopsys Designware PCIe Endpoint controller driver
+ *
+ * Copyright (C) 2016 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "pcie-designware.h"
+
+static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
+{
+ u32 reg;
+
+ reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+ dw_pcie_write_dbi(pci, pci->dbi_base2, reg, 0x4, 0x0);
+ dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x4, 0x0);
+}
+
+static int dw_pcie_ep_write_header(struct pci_epc *epc,
+ struct pci_epf_header *hdr)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ void __iomem *base = pci->dbi_base;
+
+ dw_pcie_write_dbi(pci, base, PCI_VENDOR_ID, 0x2, hdr->vendorid);
+ dw_pcie_write_dbi(pci, base, PCI_DEVICE_ID, 0x2, hdr->deviceid);
+ dw_pcie_write_dbi(pci, base, PCI_REVISION_ID, 0x1, hdr->revid);
+ dw_pcie_write_dbi(pci, base, PCI_CLASS_PROG, 0x1, hdr->progif_code);
+ dw_pcie_write_dbi(pci, base, PCI_CLASS_DEVICE, 0x2,
+ hdr->subclass_code | hdr->baseclass_code << 8);
+ dw_pcie_write_dbi(pci, base, PCI_CACHE_LINE_SIZE, 0x1,
+ hdr->cache_line_size);
+ dw_pcie_write_dbi(pci, base, PCI_SUBSYSTEM_VENDOR_ID, 0x2,
+ hdr->subsys_vendor_id);
+ dw_pcie_write_dbi(pci, base, PCI_SUBSYSTEM_ID, 0x2, hdr->subsys_id);
+ dw_pcie_write_dbi(pci, base, PCI_INTERRUPT_PIN, 0x1,
+ hdr->interrupt_pin);
+
+ return 0;
+}
+
+static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
+ dma_addr_t cpu_addr,
+ enum dw_pcie_as_type as_type)
+{
+ int ret;
+ u32 free_win;
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ free_win = find_first_zero_bit(&ep->ib_window_map,
+ sizeof(ep->ib_window_map));
+ if (free_win >= ep->num_ib_windows) {
+ dev_err(pci->dev, "no free inbound window\n");
+ return -EINVAL;
+ }
+
+ ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
+ as_type);
+ if (ret < 0) {
+ dev_err(pci->dev, "Failed to program IB window\n");
+ return ret;
+ }
+
+ ep->bar_to_atu[bar] = free_win;
+ set_bit(free_win, &ep->ib_window_map);
+
+ return 0;
+}
+
+static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar,
+ dma_addr_t bar_phys, size_t size, int flags)
+{
+ int ret;
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ enum dw_pcie_as_type as_type;
+ u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+
+ if (!(flags & PCI_BASE_ADDRESS_SPACE))
+ as_type = DW_PCIE_AS_MEM;
+ else
+ as_type = DW_PCIE_AS_IO;
+
+ ret = dw_pcie_ep_inbound_atu(ep, bar, bar_phys, as_type);
+ if (ret)
+ return ret;
+
+ dw_pcie_write_dbi(pci, pci->dbi_base2, reg, 0x4, size - 1);
+ dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x4, flags);
+
+ return 0;
+}
+
+static void dw_pcie_ep_clear_bar(struct pci_epc *epc, enum pci_barno bar)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ void __iomem *base = pci->dbi_base;
+
+ dw_pcie_ep_reset_bar(pci, bar);
+
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_VIEWPORT, 0x4,
+ PCIE_ATU_REGION_INBOUND | ep->bar_to_atu[bar]);
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_CR2, 0x4, ~PCIE_ATU_ENABLE);
+}
+
+static void *dw_pcie_ep_alloc_addr(struct pci_epc *epc, size_t size)
+{
+ /* TODO */
+ return NULL;
+}
+
+static void dw_pcie_ep_free_addr(struct pci_epc *epc)
+{
+ /* TODO */
+}
+
+static int dw_pcie_ep_raise_irq(struct pci_epc *epc,
+ enum pci_epc_irq_type type)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+
+ if (!ep->ops->raise_irq)
+ return -EINVAL;
+
+ return ep->ops->raise_irq(ep, type);
+}
+
+static int dw_pcie_ep_start(struct pci_epc *epc)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ if (!pci->ops->start_link)
+ return -EINVAL;
+
+ return pci->ops->start_link(pci);
+}
+
+static void dw_pcie_ep_stop(struct pci_epc *epc)
+{
+ struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ if (!pci->ops->stop_link)
+ return;
+
+ pci->ops->stop_link(pci);
+}
+
+void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
+{
+ struct pci_epc *epc = ep->epc;
+ struct pci_epf *epf = epc->epf;
+
+ pci_epf_linkup(epf);
+}
+
+const struct pci_epc_ops epc_ops = {
+ .write_header = dw_pcie_ep_write_header,
+ .set_bar = dw_pcie_ep_set_bar,
+ .clear_bar = dw_pcie_ep_clear_bar,
+ .alloc_addr_space = dw_pcie_ep_alloc_addr,
+ .free_addr_space = dw_pcie_ep_free_addr,
+ .raise_irq = dw_pcie_ep_raise_irq,
+ .start = dw_pcie_ep_start,
+ .stop = dw_pcie_ep_stop,
+};
+
+int dw_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+ int ret;
+ enum pci_barno bar;
+ struct pci_epc *epc;
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct device *dev = pci->dev;
+ struct device_node *np = dev->of_node;
+
+ ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
+ if (ret < 0) {
+ dev_err(dev, "unable to read *num-ib-windows* property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "num-ob-windows", &ep->num_ob_windows);
+ if (ret < 0) {
+ dev_err(dev, "unable to read *num-ob-windows* property\n");
+ return ret;
+ }
+
+ for (bar = BAR_0; bar <= BAR_5; bar++)
+ dw_pcie_ep_reset_bar(pci, bar);
+
+ if (ep->ops->ep_init)
+ ep->ops->ep_init(ep);
+
+ epc = devm_pci_epc_create(dev, &epc_ops);
+ if (IS_ERR(epc)) {
+ dev_err(dev, "failed to create epc device\n");
+ return PTR_ERR(epc);
+ }
+
+ ep->epc = epc;
+ epc_set_drvdata(epc, ep);
+ dw_pcie_setup(pci);
+
+ return 0;
+}
+
+MODULE_DESCRIPTION("Designware PCIe endpoint controller driver");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@xxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/controller/pcie-designware.c b/drivers/pci/controller/pcie-designware.c
index e52a020..4c091ff 100644
--- a/drivers/pci/controller/pcie-designware.c
+++ b/drivers/pci/controller/pcie-designware.c
@@ -115,6 +115,36 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
dw_pcie_read_dbi(pci, base, PCIE_ATU_CR2, 0x4, &val);
}
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
+ u64 cpu_addr, enum dw_pcie_as_type as_type)
+{
+ int type;
+ void __iomem *base = pci->dbi_base;
+
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_VIEWPORT, 0x4,
+ PCIE_ATU_REGION_INBOUND | index);
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_LOWER_TARGET, 0x4,
+ lower_32_bits(cpu_addr));
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_UPPER_TARGET, 0x4,
+ upper_32_bits(cpu_addr));
+
+ switch (as_type) {
+ case DW_PCIE_AS_MEM:
+ type = PCIE_ATU_TYPE_MEM;
+ break;
+ case DW_PCIE_AS_IO:
+ type = PCIE_ATU_TYPE_IO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_CR1, 0x4, type);
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_CR2, 0x4, PCIE_ATU_ENABLE |
+ PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
+ return 0;
+}
+
int dw_pcie_wait_for_link(struct dw_pcie *pci)
{
int retries;
diff --git a/drivers/pci/controller/pcie-designware.h b/drivers/pci/controller/pcie-designware.h
index 53eaa50..773bd35 100644
--- a/drivers/pci/controller/pcie-designware.h
+++ b/drivers/pci/controller/pcie-designware.h
@@ -18,6 +18,9 @@
#include <linux/msi.h>
#include <linux/pci.h>
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+
/* Synopsis specific PCIE configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_MODE_MASK (0x3f << 16)
@@ -82,6 +85,7 @@
struct dw_pcie;
struct pcie_port;
+struct dw_pcie_ep;
enum dw_pcie_device_mode {
DW_PCIE_UNKNOWN_TYPE,
@@ -132,6 +136,27 @@ struct pcie_port {
DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
};
+enum dw_pcie_as_type {
+ DW_PCIE_AS_UNKNOWN,
+ DW_PCIE_AS_MEM,
+ DW_PCIE_AS_IO,
+};
+
+struct dw_pcie_ep_ops {
+ void (*ep_init)(struct dw_pcie_ep *ep);
+ int (*raise_irq)(struct dw_pcie_ep *ep, enum pci_epc_irq_type type);
+};
+
+struct dw_pcie_ep {
+ struct pci_epc *epc;
+ struct dw_pcie_ep_ops *ops;
+ u8 bar_to_atu[6];
+ unsigned long ib_window_map;
+ unsigned long ob_window_map;
+ u32 num_ib_windows;
+ u32 num_ob_windows;
+};
+
struct dw_pcie_ops {
void (*read_dbi)(struct dw_pcie *pcie, void __iomem *base, int size,
u32 *val);
@@ -149,15 +174,21 @@ struct dw_pcie {
u32 lanes;
const struct dw_pcie_ops *ops;
struct pcie_port pp;
+ struct dw_pcie_ep ep;
};
#define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
+#define to_dw_pcie_from_ep(endpoint) \
+ container_of((endpoint), struct dw_pcie, ep)
+
int dw_pcie_wait_for_link(struct dw_pcie *pci);
int dw_pcie_link_up(struct dw_pcie *pci);
void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
int type, u64 cpu_addr, u64 pci_addr,
u32 size);
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
+ u64 cpu_addr, enum dw_pcie_as_type as_type);
int dw_pcie_read(void __iomem *addr, int size, u32 *val);
int dw_pcie_write(void __iomem *addr, int size, u32 val);
void dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
@@ -166,6 +197,20 @@ void dw_pcie_write_dbi(struct dw_pcie *pci, void *base, u32 reg,
int size, u32 val);
void dw_pcie_setup(struct dw_pcie *pci);
+#ifdef CONFIG_PCIE_DW_EP
+void dw_pcie_ep_linkup(struct dw_pcie_ep *ep);
+int dw_pcie_ep_init(struct dw_pcie_ep *ep);
+#else
+static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
+{
+}
+
+static inline int dw_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+ return 0;
+}
+#endif
+
#ifdef CONFIG_PCIE_DW_HOST
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
void dw_pcie_msi_init(struct pcie_port *pp);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
