On 08/08/2016 08:36 AM, Borislav Petkov wrote:
On Tue, Aug 02, 2016 at 10:56:20AM -0500, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx> Add Altera Arria10 SD-MMC FIFO memory EDAC support. The SD-MMC is a dual port RAM implementation which is different than any of the other peripherals and therefore requires additional code. Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx> --- drivers/edac/Kconfig | 7 ++ drivers/edac/altera_edac.c | 188 +++++++++++++++++++++++++++++++++++++++++++- drivers/edac/altera_edac.h | 5 ++ 3 files changed, 199 insertions(+), 1 deletion(-) diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 72752f4..394cd16 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -426,6 +426,13 @@ config EDAC_ALTERA_QSPI Support for error detection and correction on the Altera QSPI FIFO Memory for Altera SoCs. +config EDAC_ALTERA_SDMMC + bool "Altera SDMMC FIFO ECC" + depends on EDAC_ALTERA=y && MMC_DW + help + Support for error detection and correction on the + Altera SDMMC FIFO Memory for Altera SoCs. + config EDAC_SYNOPSYS tristate "Synopsys DDR Memory Controller" depends on EDAC_MM_EDAC && ARCH_ZYNQ diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c index 28247f8..8b5177e 100644 --- a/drivers/edac/altera_edac.c +++ b/drivers/edac/altera_edac.c @@ -1393,6 +1393,188 @@ early_initcall(socfpga_init_qspi_ecc); #endif /* CONFIG_EDAC_ALTERA_QSPI */ +/********************* SDMMC Device Functions **********************/ + +#ifdef CONFIG_EDAC_ALTERA_SDMMC + +static const struct edac_device_prv_data a10_sdmmceccb_data; +static int altr_portb_setup(struct altr_edac_device_dev *device) +{ + struct edac_device_ctl_info *dci; + struct altr_edac_device_dev *altdev; + char *ecc_name = "sdmmcb-ecc"; + int edac_idx, rc; + struct device_node *np; + const struct edac_device_prv_data *prv = &a10_sdmmceccb_data; + + rc = altr_check_ecc_deps(device); + if (rc) + return rc; + + /* Create the PortB EDAC device */ + edac_idx = edac_device_alloc_index(); + dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name, 1, + ecc_name, 1, 0, NULL, 0, edac_idx); + if (!dci) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s: Unable to allocate PortB EDAC device\n", + ecc_name); + return -ENOMEM; + } + + /* Initialize the PortB EDAC device structure from PortA structure */ + altdev = dci->pvt_info; + *altdev = *device; + + if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL)) + return -ENOMEM; + + /* Update PortB specific values */ + altdev->edac_dev_name = ecc_name; + altdev->edac_idx = edac_idx; + altdev->edac_dev = dci; + altdev->data = prv; + dci->dev = &altdev->ddev; + dci->ctl_name = "Altera ECC Manager"; + dci->mod_name = ecc_name; + dci->dev_name = ecc_name; + + /* Find the SD/MMC device tree Node then update the IRQs for PortB */ + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");So why aren't you doing this thing first in the function so that...+ if (!np) { + rc = -ENODEV; + goto err_release_group_1;... you can save yourself the unwind work in err_release_group_1? In general, make sure you're doing all the work of poking at the hardware so that you make sure you have the right resources *before* you go and allocate and init stuff here. Should make the error paths simpler and the function body smaller.
Argh. Missed that. The rest of the IRQ queries require the DCI allocation so the functions below will need to unwind but yes, the of_find_compatible_node should move. Thanks!
+ } + + altdev->sb_irq = irq_of_parse_and_map(np, 2); + if (!altdev->sb_irq) { + edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n"); + rc = -ENODEV; + goto err_release_group_1; + } + rc = devm_request_irq(&altdev->ddev, altdev->sb_irq, + prv->ecc_irq_handler, + IRQF_SHARED, ecc_name, altdev); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, "PortB SBERR IRQ error\n"); + goto err_release_group_1; + } + + altdev->db_irq = irq_of_parse_and_map(np, 3); + if (!altdev->db_irq) { + edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n"); + rc = -ENODEV; + goto err_release_group_1; + } + rc = devm_request_irq(&altdev->ddev, altdev->db_irq, + prv->ecc_irq_handler, + IRQF_SHARED, ecc_name, altdev); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n"); + goto err_release_group_1; + } + + rc = edac_device_add_device(dci); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "edac_device_add_device portB failed\n"); + rc = -ENOMEM; + goto err_release_group_1; + } + altr_create_edacdev_dbgfs(dci, prv); + + list_add(&altdev->next, &altdev->edac->a10_ecc_devices); + + devres_remove_group(&altdev->ddev, altr_portb_setup); + + return 0; + +err_release_group_1: + edac_device_free_ctl_info(dci); + devres_release_group(&altdev->ddev, altr_portb_setup); + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s:Error setting up EDAC device: %d\n", ecc_name, rc); + return rc; +} + +static irqreturn_t altr_edac_a10_ecc_irq_portb(int irq, void *dev_id) +{ + struct altr_edac_device_dev *ad = dev_id; + void __iomem *base = ad->base; + const struct edac_device_prv_data *priv = ad->data; + + if (irq == ad->sb_irq) { + writel(priv->ce_clear_mask, + base + ALTR_A10_ECC_INTSTAT_OFST); + edac_device_handle_ce(ad->edac_dev, 0, 0, ad->edac_dev_name); + return IRQ_HANDLED; + } else if (irq == ad->db_irq) { + writel(priv->ue_clear_mask, + base + ALTR_A10_ECC_INTSTAT_OFST); + edac_device_handle_ue(ad->edac_dev, 0, 0, ad->edac_dev_name); + return IRQ_HANDLED; + } + + WARN_ON(1);WARN(1, "Strange IRQ%d on Port B... or something like that which is more informative.
Yes, Good point, I will fix this.
I see your point. I will change this to a KERN_WARNING so there is some indication why the SDMMC wasn't initialized if SDMMC is enabled in Kconfig.+ + return IRQ_NONE; +} + +static const struct edac_device_prv_data a10_sdmmcecca_data = { + .setup = altr_portb_setup, + .ce_clear_mask = ALTR_A10_ECC_SERRPENA, + .ue_clear_mask = ALTR_A10_ECC_DERRPENA, + .dbgfs_name = "altr_trigger", + .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_SERRPENA, + .ue_set_mask = ALTR_A10_ECC_DERRPENA, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq, + .inject_fops = &altr_edac_a10_device_inject_fops, +}; + +static const struct edac_device_prv_data a10_sdmmceccb_data = { + .setup = altr_portb_setup, + .ce_clear_mask = ALTR_A10_ECC_SERRPENB, + .ue_clear_mask = ALTR_A10_ECC_DERRPENB, + .dbgfs_name = "altr_trigger", + .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_TSERRB, + .ue_set_mask = ALTR_A10_ECC_TDERRB, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq_portb, + .inject_fops = &altr_edac_a10_device_inject_fops, +}; + +static int __init socfpga_init_sdmmc_ecc(void) +{ + int rc = -ENODEV; + struct device_node *child = of_find_compatible_node(NULL, NULL, + "altr,socfpga-sdmmc-ecc"); + if (!child) { + edac_printk(KERN_ERR, EDAC_DEVICE, "SDMMC node not found\n");Are you sure you want to issue this error each time the driver loads? Is that even an error condition?
I will make the changes and re-submit. Thanks for reviewing!
+ return -ENODEV; + } + + if (!of_device_is_available(child)) + goto exit; + + if (validate_parent_available(child)) + goto exit; + + rc = altr_init_a10_ecc_block(child, ALTR_A10_SDMMC_IRQ_MASK, + a10_sdmmcecca_data.ecc_enable_mask, 1); +exit: + of_node_put(child); + return rc; +} + +early_initcall(socfpga_init_sdmmc_ecc); + +#endif /* CONFIG_EDAC_ALTERA_SDMMC */ + /********************* Arria10 EDAC Device Functions *************************/ static const struct of_device_id altr_edac_a10_device_of_match[] = { #ifdef CONFIG_EDAC_ALTERA_L2C
-- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
