Convert it to ReST format and add it at media/v4l-drivers book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
Documentation/media/v4l-drivers/index.rst | 1 +
Documentation/media/v4l-drivers/si476x.rst | 12 +++++---
Documentation/media/v4l-drivers/soc-camera.rst | 41 +++++++++++++++-----------
3 files changed, 32 insertions(+), 22 deletions(-)
diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst
index 3ff127195fd3..a982d73abcb6 100644
--- a/Documentation/media/v4l-drivers/index.rst
+++ b/Documentation/media/v4l-drivers/index.rst
@@ -38,4 +38,5 @@ License".
si470x
si4713
si476x
+ soc-camera
zr364xx
diff --git a/Documentation/media/v4l-drivers/si476x.rst b/Documentation/media/v4l-drivers/si476x.rst
index 01a8d44425aa..d5c07bb7524d 100644
--- a/Documentation/media/v4l-drivers/si476x.rst
+++ b/Documentation/media/v4l-drivers/si476x.rst
@@ -1,9 +1,13 @@
-SI476x Driver Readme
-------------------------------------------------
- Copyright (C) 2013 Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
+.. include:: <isonum.txt>
+
+
+The SI476x Driver
+=================
+
+Copyright |copy| 2013 Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
TODO for the driver
-------------------------------
+-------------------
- According to the SiLabs' datasheet it is possible to update the
firmware of the radio chip in the run-time, thus bringing it to the
diff --git a/Documentation/media/v4l-drivers/soc-camera.rst b/Documentation/media/v4l-drivers/soc-camera.rst
index 84f41cf1f3e8..ba0c15dd092c 100644
--- a/Documentation/media/v4l-drivers/soc-camera.rst
+++ b/Documentation/media/v4l-drivers/soc-camera.rst
@@ -1,5 +1,7 @@
- Soc-Camera Subsystem
- ====================
+The Soc-Camera Drivers
+======================
+
+Author: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Terminology
-----------
@@ -45,10 +47,14 @@ Camera host API
A host camera driver is registered using the
-soc_camera_host_register(struct soc_camera_host *);
+.. code-block:: none
+
+ soc_camera_host_register(struct soc_camera_host *);
function. The host object can be initialized as follows:
+.. code-block:: none
+
struct soc_camera_host *ici;
ici->drv_name = DRV_NAME;
ici->ops = &camera_host_ops;
@@ -58,18 +64,20 @@ function. The host object can be initialized as follows:
All camera host methods are passed in a struct soc_camera_host_ops:
-static struct soc_camera_host_ops camera_host_ops = {
- .owner = THIS_MODULE,
- .add = camera_add_device,
- .remove = camera_remove_device,
- .set_fmt = camera_set_fmt_cap,
- .try_fmt = camera_try_fmt_cap,
- .init_videobuf2 = camera_init_videobuf2,
- .poll = camera_poll,
- .querycap = camera_querycap,
- .set_bus_param = camera_set_bus_param,
- /* The rest of host operations are optional */
-};
+.. code-block:: none
+
+ static struct soc_camera_host_ops camera_host_ops = {
+ .owner = THIS_MODULE,
+ .add = camera_add_device,
+ .remove = camera_remove_device,
+ .set_fmt = camera_set_fmt_cap,
+ .try_fmt = camera_try_fmt_cap,
+ .init_videobuf2 = camera_init_videobuf2,
+ .poll = camera_poll,
+ .querycap = camera_querycap,
+ .set_bus_param = camera_set_bus_param,
+ /* The rest of host operations are optional */
+ };
.add and .remove methods are called when a sensor is attached to or detached
from the host. .set_bus_param is used to configure physical connection
@@ -159,6 +167,3 @@ configure camera drivers to produce the FOURCC format, requested by the user,
using the VIDIOC_S_FMT ioctl(). Apart from those standard format conversions,
host drivers can also provide their own conversion rules by implementing a
.get_formats and, if required, a .put_formats methods.
-
---
-Author: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
