Those characters are used for citations. Better to escape, to
avoid them to be misinterpreted.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
.../media/uapi/cec/cec-ioc-adap-g-caps.rst | 4 +-
.../media/uapi/cec/cec-ioc-adap-g-log-addrs.rst | 6 +--
Documentation/media/uapi/cec/cec-ioc-receive.rst | 2 +-
Documentation/media/uapi/dvb/ca_data_types.rst | 4 +-
Documentation/media/uapi/dvb/dmx-get-pes-pids.rst | 4 +-
Documentation/media/uapi/dvb/dtv-property.rst | 6 +--
Documentation/media/uapi/dvb/examples.rst | 18 +++----
.../media/uapi/dvb/fe-diseqc-recv-slave-reply.rst | 4 +-
.../media/uapi/dvb/fe-diseqc-send-master-cmd.rst | 4 +-
Documentation/media/uapi/dvb/fe-get-info.rst | 2 +-
Documentation/media/uapi/dvb/video_types.rst | 4 +-
.../media/uapi/mediactl/media-ioc-device-info.rst | 10 ++--
.../uapi/mediactl/media-ioc-enum-entities.rst | 4 +-
.../media/uapi/mediactl/media-ioc-g-topology.rst | 10 ++--
Documentation/media/uapi/rc/keytable.c.rst | 42 +++++++--------
Documentation/media/uapi/v4l/buffer.rst | 4 +-
Documentation/media/uapi/v4l/capture.c.rst | 14 ++---
Documentation/media/uapi/v4l/dev-osd.rst | 2 +-
Documentation/media/uapi/v4l/dev-raw-vbi.rst | 4 +-
.../media/uapi/v4l/dev-raw-vbi_files/vbi_625.pdf | Bin 3683 -> 3685 bytes
Documentation/media/uapi/v4l/dev-sdr.rst | 2 +-
Documentation/media/uapi/v4l/dev-sliced-vbi.rst | 58 ++++++++++-----------
Documentation/media/uapi/v4l/hist-v4l2.rst | 10 ++--
Documentation/media/uapi/v4l/pixfmt-003.rst | 4 +-
Documentation/media/uapi/v4l/subdev-formats.rst | 2 +-
Documentation/media/uapi/v4l/v4l2grab.c.rst | 2 +-
.../media/uapi/v4l/vidioc-create-bufs.rst | 2 +-
.../media/uapi/v4l/vidioc-dbg-g-chip-info.rst | 6 +--
.../media/uapi/v4l/vidioc-dbg-g-register.rst | 2 +-
.../media/uapi/v4l/vidioc-decoder-cmd.rst | 2 +-
Documentation/media/uapi/v4l/vidioc-dqevent.rst | 4 +-
.../media/uapi/v4l/vidioc-dv-timings-cap.rst | 6 +--
.../media/uapi/v4l/vidioc-encoder-cmd.rst | 2 +-
.../media/uapi/v4l/vidioc-enum-dv-timings.rst | 2 +-
Documentation/media/uapi/v4l/vidioc-enum-fmt.rst | 4 +-
.../media/uapi/v4l/vidioc-enum-frameintervals.rst | 2 +-
.../media/uapi/v4l/vidioc-enum-framesizes.rst | 2 +-
.../media/uapi/v4l/vidioc-enum-freq-bands.rst | 2 +-
Documentation/media/uapi/v4l/vidioc-enuminput.rst | 4 +-
Documentation/media/uapi/v4l/vidioc-enumoutput.rst | 4 +-
Documentation/media/uapi/v4l/vidioc-enumstd.rst | 4 +-
Documentation/media/uapi/v4l/vidioc-expbuf.rst | 2 +-
Documentation/media/uapi/v4l/vidioc-g-audio.rst | 4 +-
Documentation/media/uapi/v4l/vidioc-g-audioout.rst | 4 +-
.../media/uapi/v4l/vidioc-g-dv-timings.rst | 2 +-
Documentation/media/uapi/v4l/vidioc-g-edid.rst | 2 +-
.../media/uapi/v4l/vidioc-g-enc-index.rst | 4 +-
.../media/uapi/v4l/vidioc-g-ext-ctrls.rst | 4 +-
Documentation/media/uapi/v4l/vidioc-g-fmt.rst | 2 +-
.../media/uapi/v4l/vidioc-g-frequency.rst | 2 +-
Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst | 4 +-
.../media/uapi/v4l/vidioc-g-modulator.rst | 4 +-
Documentation/media/uapi/v4l/vidioc-g-parm.rst | 6 +--
.../media/uapi/v4l/vidioc-g-selection.rst | 2 +-
.../media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst | 16 +++---
Documentation/media/uapi/v4l/vidioc-g-tuner.rst | 4 +-
Documentation/media/uapi/v4l/vidioc-querycap.rst | 8 +--
Documentation/media/uapi/v4l/vidioc-queryctrl.rst | 12 ++---
Documentation/media/uapi/v4l/vidioc-reqbufs.rst | 2 +-
.../media/uapi/v4l/vidioc-s-hw-freq-seek.rst | 2 +-
.../uapi/v4l/vidioc-subdev-enum-frame-interval.rst | 2 +-
.../uapi/v4l/vidioc-subdev-enum-frame-size.rst | 2 +-
.../uapi/v4l/vidioc-subdev-enum-mbus-code.rst | 2 +-
.../media/uapi/v4l/vidioc-subdev-g-crop.rst | 2 +-
.../media/uapi/v4l/vidioc-subdev-g-fmt.rst | 2 +-
.../uapi/v4l/vidioc-subdev-g-frame-interval.rst | 2 +-
.../media/uapi/v4l/vidioc-subdev-g-selection.rst | 2 +-
.../media/uapi/v4l/vidioc-subscribe-event.rst | 2 +-
68 files changed, 188 insertions(+), 188 deletions(-)
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
index 2ca9199c3305..8d9d55757d45 100644
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
@@ -52,7 +52,7 @@ returns the information to the application. The ioctl never fails.
- char
- - ``driver[32]``
+ - ``driver\[32\]``
- The name of the cec adapter driver.
@@ -60,7 +60,7 @@ returns the information to the application. The ioctl never fails.
- char
- - ``name[32]``
+ - ``name\[32\]``
- The name of this CEC adapter. The combination ``driver`` and
``name`` must be unique.
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
index 7d7a3b43aedc..c52b8888d381 100644
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
@@ -70,7 +70,7 @@ by a file handle in initiator mode (see
- The actual logical addresses that were claimed. This is set by the
driver. If no logical address could be claimed, then it is set to
``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then
- ``log_addr[0]`` is set to 0xf and all others to
+ ``log_addr\[0\]`` is set to 0xf and all others to
``CEC_LOG_ADDR_INVALID``.
- .. row 2
@@ -138,7 +138,7 @@ by a file handle in initiator mode (see
- char
- - ``osd_name``\ [15]
+ - ``osd_name``\ \[15\]
- The On-Screen Display name as is returned by the
``CEC_MSG_SET_OSD_NAME`` message.
@@ -178,7 +178,7 @@ by a file handle in initiator mode (see
- __u8
- - ``features`` [CEC_MAX_LOG_ADDRS][12]
+ - ``features`` [CEC_MAX_LOG_ADDRS]\[12\]
- Features for each logical address. Used to implement the
``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the
diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
index 47aadcd553ee..9a16a3d38340 100644
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst
@@ -139,7 +139,7 @@ queue, then it will return -1 and set errno to the EBUSY error code.
- __u8
- - ``msg``\ [16]
+ - ``msg``\ \[16\]
- The message payload. For :ref:`CEC_TRANSMIT` this is filled in by the
application. The driver will fill this in for :ref:`CEC_RECEIVE` and
diff --git a/Documentation/media/uapi/dvb/ca_data_types.rst b/Documentation/media/uapi/dvb/ca_data_types.rst
index 025f910ae945..8a776c855aab 100644
--- a/Documentation/media/uapi/dvb/ca_data_types.rst
+++ b/Documentation/media/uapi/dvb/ca_data_types.rst
@@ -77,7 +77,7 @@ ca_msg_t
unsigned int index;
unsigned int type;
unsigned int length;
- unsigned char msg[256];
+ unsigned char msg\[256\];
} ca_msg_t;
@@ -92,7 +92,7 @@ ca_descr_t
typedef struct ca_descr {
unsigned int index;
unsigned int parity;
- unsigned char cw[8];
+ unsigned char cw\[8\];
} ca_descr_t;
diff --git a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst
index ba5d30c913c8..dcca37c7cec1 100644
--- a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst
+++ b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst
@@ -15,7 +15,7 @@ DMX_GET_PES_PIDS
Synopsis
--------
-.. cpp:function:: int ioctl(fd, int request = DMX_GET_PES_PIDS, __u16[5])
+.. cpp:function:: int ioctl(fd, int request = DMX_GET_PES_PIDS, __u16\[5\])
Arguments
@@ -40,7 +40,7 @@ Arguments
- .. row 3
- - __u16[5]
+ - __u16\[5\]
- Undocumented.
diff --git a/Documentation/media/uapi/dvb/dtv-property.rst b/Documentation/media/uapi/dvb/dtv-property.rst
index 5073a49def2a..219111ebc7f5 100644
--- a/Documentation/media/uapi/dvb/dtv-property.rst
+++ b/Documentation/media/uapi/dvb/dtv-property.rst
@@ -13,14 +13,14 @@ struct dtv_property
struct dtv_property {
__u32 cmd;
- __u32 reserved[3];
+ __u32 reserved\[3\];
union {
__u32 data;
struct dtv_fe_stats st;
struct {
- __u8 data[32];
+ __u8 data\[32\];
__u32 len;
- __u32 reserved1[3];
+ __u32 reserved1\[3\];
void *reserved2;
} buffer;
} u;
diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst
index bf0a8617de92..e23ad9fb2008 100644
--- a/Documentation/media/uapi/dvb/examples.rst
+++ b/Documentation/media/uapi/dvb/examples.rst
@@ -87,7 +87,7 @@ tuners, but can easily be adjusted for QAM.
struct secCmdSequence scmds;
struct dmx_pes_filter_params pesFilterParams;
FrontendParameters frp;
- struct pollfd pfd[1];
+ struct pollfd pfd\[1\];
FrontendEvent event;
int demux1, demux2, demux3, front;
@@ -143,7 +143,7 @@ tuners, but can easily be adjusted for QAM.
scmd.u.diseqc.addr=0x10;
scmd.u.diseqc.cmd=0x38;
scmd.u.diseqc.numParams=1;
- scmd.u.diseqc.params[0] = 0xF0 | ((diseqc * 4) & 0x0F) |
+ scmd.u.diseqc.params\[0\] = 0xF0 | ((diseqc * 4) & 0x0F) |
(scmds.continuousTone == SEC_TONE_ON ? 1 : 0) |
(scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0);
@@ -168,11 +168,11 @@ tuners, but can easily be adjusted for QAM.
return -1;
}
- pfd[0].fd = front;
- pfd[0].events = POLLIN;
+ pfd\[0\].fd = front;
+ pfd\[0\].events = POLLIN;
if (poll(pfd,1,3000)){
- if (pfd[0].revents & POLLIN){
+ if (pfd\[0\].revents & POLLIN){
printf("Getting QPSK event\\n");
if ( ioctl(front, FE_GET_EVENT, &event)
@@ -324,7 +324,7 @@ recording.
int written;
uint8_t buf[BUFFY];
uint64_t length;
- struct pollfd pfd[1];
+ struct pollfd pfd\[1\];
int dvr, dvr_out;
/* open dvr device */
@@ -351,13 +351,13 @@ recording.
return -1;
}
- pfd[0].fd = dvr;
- pfd[0].events = POLLIN;
+ pfd\[0\].fd = dvr;
+ pfd\[0\].events = POLLIN;
/* poll for dvr data and write to file */
while (length < MAX_LENGTH ) {
if (poll(pfd,1,1)){
- if (pfd[0].revents & POLLIN){
+ if (pfd\[0\].revents & POLLIN){
len = read(dvr, buf, BUFFY);
if (len < 0){
perror("recording");
diff --git a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst
index 7bd02ac7bff4..0c356fcb6f08 100644
--- a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst
+++ b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst
@@ -52,9 +52,9 @@ struct dvb_diseqc_slave_reply
- uint8_t
- - msg[4]
+ - msg\[4\]
- - DiSEqC message (framing, data[3])
+ - DiSEqC message (framing, data\[3\])
- .. row 2
diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst
index 58a5e6ac10bd..a60b8dd157fe 100644
--- a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst
+++ b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst
@@ -52,9 +52,9 @@ struct dvb_diseqc_master_cmd
- uint8_t
- - msg[6]
+ - msg\[6\]
- - DiSEqC message (framing, address, command, data[3])
+ - DiSEqC message (framing, address, command, data\[3\])
- .. row 2
diff --git a/Documentation/media/uapi/dvb/fe-get-info.rst b/Documentation/media/uapi/dvb/fe-get-info.rst
index bb6c32e47ce8..4176977f07b3 100644
--- a/Documentation/media/uapi/dvb/fe-get-info.rst
+++ b/Documentation/media/uapi/dvb/fe-get-info.rst
@@ -57,7 +57,7 @@ struct dvb_frontend_info
- char
- - name[128]
+ - name\[128\]
- Name of the frontend
diff --git a/Documentation/media/uapi/dvb/video_types.rst b/Documentation/media/uapi/dvb/video_types.rst
index 671f365ceeb4..d4debb36580d 100644
--- a/Documentation/media/uapi/dvb/video_types.rst
+++ b/Documentation/media/uapi/dvb/video_types.rst
@@ -125,7 +125,7 @@ it can be extended safely in the future.
} play;
struct {
- __u32 data[16];
+ __u32 data\[16\];
} raw;
};
};
@@ -352,7 +352,7 @@ passed to the ioctl VIDEO_GET_NAVI:
typedef
struct video_navi_pack {
int length; /* 0 ... 1024 */
- uint8_t data[1024];
+ uint8_t data\[1024\];
} video_navi_pack_t;
diff --git a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst
index 467d82cbb81e..e7d9570a020f 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst
@@ -52,7 +52,7 @@ ioctl never fails.
- char
- - ``driver``\ [16]
+ - ``driver``\ \[16\]
- Name of the driver implementing the media API as a NUL-terminated
ASCII string. The driver version is stored in the
@@ -66,7 +66,7 @@ ioctl never fails.
- char
- - ``model``\ [32]
+ - ``model``\ \[32\]
- Device model name as a NUL-terminated UTF-8 string. The device
version is stored in the ``device_version`` field and is not be
@@ -76,7 +76,7 @@ ioctl never fails.
- char
- - ``serial``\ [40]
+ - ``serial``\ \[40\]
- Serial number as a NUL-terminated ASCII string.
@@ -84,7 +84,7 @@ ioctl never fails.
- char
- - ``bus_info``\ [32]
+ - ``bus_info``\ \[32\]
- Location of the device in the system as a NUL-terminated ASCII
string. This includes the bus type name (PCI, USB, ...) and a
@@ -120,7 +120,7 @@ ioctl never fails.
- __u32
- - ``reserved``\ [31]
+ - ``reserved``\ \[31\]
- Reserved for future extensions. Drivers and applications must set
this array to zero.
diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst
index 12d4b25d5b94..181eef6a34e6 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst
@@ -75,7 +75,7 @@ id's until they get an error.
- char
- - ``name``\ [32]
+ - ``name``\ \[32\]
-
-
@@ -181,7 +181,7 @@ id's until they get an error.
-
- __u8
- - ``raw``\ [184]
+ - ``raw``\ \[184\]
-
-
diff --git a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst
index 2e382cc7762c..6fc564dde397 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst
@@ -163,7 +163,7 @@ desired arrays with the media graph elements.
- char
- - ``name``\ [64]
+ - ``name``\ \[64\]
- Entity name as an UTF-8 NULL-terminated string.
@@ -179,7 +179,7 @@ desired arrays with the media graph elements.
- __u32
- - ``reserved``\ [12]
+ - ``reserved``\ \[12\]
- Reserved for future extensions. Drivers and applications must set
this array to zero.
@@ -221,7 +221,7 @@ desired arrays with the media graph elements.
- __u32
- - ``reserved``\ [9]
+ - ``reserved``\ \[9\]
- Reserved for future extensions. Drivers and applications must set
this array to zero.
@@ -299,7 +299,7 @@ desired arrays with the media graph elements.
- __u32
- - ``reserved``\ [9]
+ - ``reserved``\ \[9\]
- Reserved for future extensions. Drivers and applications must set
this array to zero.
@@ -354,7 +354,7 @@ desired arrays with the media graph elements.
- __u32
- - ``reserved``\ [5]
+ - ``reserved``\ \[5\]
- Reserved for future extensions. Drivers and applications must set
this array to zero.
diff --git a/Documentation/media/uapi/rc/keytable.c.rst b/Documentation/media/uapi/rc/keytable.c.rst
index e6ce1e3f5a78..5ee6e8c6639d 100644
--- a/Documentation/media/uapi/rc/keytable.c.rst
+++ b/Documentation/media/uapi/rc/keytable.c.rst
@@ -35,16 +35,16 @@ file: uapi/v4l/keytable.c
struct parse_key *p;
for (p=keynames;p->name!=NULL;p++) {
- if (p->value == (unsigned)codes[1]) {
- printf("scancode 0x%04x = %s (0x%02x)\\n", codes[0], p->name, codes[1]);
+ if (p->value == (unsigned)codes\[1\]) {
+ printf("scancode 0x%04x = %s (0x%02x)\\n", codes\[0\], p->name, codes\[1\]);
return;
}
}
- if (isprint (codes[1]))
- printf("scancode %d = '%c' (0x%02x)\\n", codes[0], codes[1], codes[1]);
+ if (isprint (codes\[1\]))
+ printf("scancode %d = '%c' (0x%02x)\\n", codes\[0\], codes\[1\], codes\[1\]);
else
- printf("scancode %d = 0x%02x\\n", codes[0], codes[1]);
+ printf("scancode %d = 0x%02x\\n", codes\[0\], codes\[1\]);
}
int parse_code(char *string)
@@ -63,7 +63,7 @@ file: uapi/v4l/keytable.c
{
int fd;
unsigned int i, j;
- int codes[2];
+ int codes\[2\];
if (argc<2 || argc>4) {
printf ("usage: %s <device> to get table; or\\n"
@@ -72,7 +72,7 @@ file: uapi/v4l/keytable.c
return -1;
}
- if ((fd = open(argv[1], O_RDONLY)) < 0) {
+ if ((fd = open(argv\[1\], O_RDONLY)) < 0) {
perror("Couldn't open input device");
return(-1);
}
@@ -80,16 +80,16 @@ file: uapi/v4l/keytable.c
if (argc==4) {
int value;
- value=parse_code(argv[3]);
+ value=parse_code(argv\[3\]);
if (value==-1) {
- value = strtol(argv[3], NULL, 0);
+ value = strtol(argv\[3\], NULL, 0);
if (errno)
perror("value");
}
- codes [0] = (unsigned) strtol(argv[2], NULL, 0);
- codes [1] = (unsigned) value;
+ codes \[0\] = (unsigned) strtol(argv\[2\], NULL, 0);
+ codes \[1\] = (unsigned) value;
if(ioctl(fd, EVIOCSKEYCODE, codes))
perror ("EVIOCSKEYCODE");
@@ -102,9 +102,9 @@ file: uapi/v4l/keytable.c
if (argc==3) {
FILE *fin;
int value;
- char *scancode, *keycode, s[2048];
+ char *scancode, *keycode, s\[2048\];
- fin=fopen(argv[2],"r");
+ fin=fopen(argv\[2\],"r");
if (fin==NULL) {
perror ("opening keycode file");
return -1;
@@ -113,8 +113,8 @@ file: uapi/v4l/keytable.c
/* Clears old table */
for (j = 0; j < 256; j++) {
for (i = 0; i < 256; i++) {
- codes[0] = (j << 8) | i;
- codes[1] = KEY_RESERVED;
+ codes\[0\] = (j << 8) | i;
+ codes\[1\] = KEY_RESERVED;
ioctl(fd, EVIOCSKEYCODE, codes);
}
}
@@ -149,12 +149,12 @@ file: uapi/v4l/keytable.c
perror("value");
}
- codes [0] = (unsigned) strtol(scancode, NULL, 0);
- codes [1] = (unsigned) value;
+ codes \[0\] = (unsigned) strtol(scancode, NULL, 0);
+ codes \[1\] = (unsigned) value;
- // printf("\\t%04x=%04x\\n",codes[0], codes[1]);
+ // printf("\\t%04x=%04x\\n",codes\[0\], codes\[1\]);
if(ioctl(fd, EVIOCSKEYCODE, codes)) {
- fprintf(stderr, "Setting scancode 0x%04x with 0x%04x via ",codes[0], codes[1]);
+ fprintf(stderr, "Setting scancode 0x%04x with 0x%04x via ",codes\[0\], codes\[1\]);
perror ("EVIOCSKEYCODE");
}
@@ -167,8 +167,8 @@ file: uapi/v4l/keytable.c
/* Get scancode table */
for (j = 0; j < 256; j++) {
for (i = 0; i < 256; i++) {
- codes[0] = (j << 8) | i;
- if (!ioctl(fd, EVIOCGKEYCODE, codes) && codes[1] != KEY_RESERVED)
+ codes\[0\] = (j << 8) | i;
+ if (!ioctl(fd, EVIOCGKEYCODE, codes) && codes\[1\] != KEY_RESERVED)
prtcode(codes);
}
}
diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst
index 5deb4a46f992..ba22464c0fcc 100644
--- a/Documentation/media/uapi/v4l/buffer.rst
+++ b/Documentation/media/uapi/v4l/buffer.rst
@@ -379,7 +379,7 @@ struct v4l2_plane
- __u32
- - ``reserved[11]``
+ - ``reserved\[11\]``
-
- Reserved for future use. Should be zeroed by drivers and
@@ -868,7 +868,7 @@ struct v4l2_timecode
- __u8
- - ``userbits``\ [4]
+ - ``userbits``\ \[4\]
- The "user group" bits from the timecode.
diff --git a/Documentation/media/uapi/v4l/capture.c.rst b/Documentation/media/uapi/v4l/capture.c.rst
index 56525a0fb2fa..4f0dead97ad2 100644
--- a/Documentation/media/uapi/v4l/capture.c.rst
+++ b/Documentation/media/uapi/v4l/capture.c.rst
@@ -88,7 +88,7 @@ file: media/v4l/capture.c
switch (io) {
case IO_METHOD_READ:
- if (-1 == read(fd, buffers[0].start, buffers[0].length)) {
+ if (-1 == read(fd, buffers\[0\].start, buffers\[0\].length)) {
switch (errno) {
case EAGAIN:
return 0;
@@ -103,7 +103,7 @@ file: media/v4l/capture.c
}
}
- process_image(buffers[0].start, buffers[0].length);
+ process_image(buffers\[0\].start, buffers\[0\].length);
break;
case IO_METHOD_MMAP:
@@ -284,7 +284,7 @@ file: media/v4l/capture.c
switch (io) {
case IO_METHOD_READ:
- free(buffers[0].start);
+ free(buffers\[0\].start);
break;
case IO_METHOD_MMAP:
@@ -311,10 +311,10 @@ file: media/v4l/capture.c
exit(EXIT_FAILURE);
}
- buffers[0].length = buffer_size;
- buffers[0].start = malloc(buffer_size);
+ buffers\[0\].length = buffer_size;
+ buffers\[0\].start = malloc(buffer_size);
- if (!buffers[0].start) {
+ if (!buffers\[0\].start) {
fprintf(stderr, "Out of memory\\n");
exit(EXIT_FAILURE);
}
@@ -575,7 +575,7 @@ file: media/v4l/capture.c
"-f | --format Force format to 640x480 YUYVn"
"-c | --count Number of frames to grab [%i]n"
"",
- argv[0], dev_name, frame_count);
+ argv\[0\], dev_name, frame_count);
}
static const char short_options[] = "d:hmruofc:";
diff --git a/Documentation/media/uapi/v4l/dev-osd.rst b/Documentation/media/uapi/v4l/dev-osd.rst
index fadda131f020..36129cf4e92a 100644
--- a/Documentation/media/uapi/v4l/dev-osd.rst
+++ b/Documentation/media/uapi/v4l/dev-osd.rst
@@ -68,7 +68,7 @@ Example: Finding a framebuffer device for OSD
}
for (i = 0; i < 30; i++) {
- char dev_name[16];
+ char dev_name\[16\];
struct fb_fix_screeninfo si;
snprintf(dev_name, sizeof(dev_name), "/dev/fb%u", i);
diff --git a/Documentation/media/uapi/v4l/dev-raw-vbi.rst b/Documentation/media/uapi/v4l/dev-raw-vbi.rst
index d5a4b3530b69..eea4c05a0cd4 100644
--- a/Documentation/media/uapi/v4l/dev-raw-vbi.rst
+++ b/Documentation/media/uapi/v4l/dev-raw-vbi.rst
@@ -188,7 +188,7 @@ and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does
service transmissions embedded in the picture.
An application can set the first or second ``count`` value to zero
- if no data is required from the respective field; ``count``\ [1]
+ if no data is required from the respective field; ``count``\ \[1\]
if the scanning system is progressive, i. e. not interlaced. The
corresponding start value shall be ignored by the application and
driver. Anyway, drivers may not support single field capturing and
@@ -318,7 +318,7 @@ The total size of a frame computes as follows:
.. code-block:: c
- (count[0] + count[1]) * samples_per_line * sample size in bytes
+ (count\[0\] + count\[1\]) * samples_per_line * sample size in bytes
The sample size is most likely always one byte, applications must check
the ``sample_format`` field though, to function properly with other
diff --git a/Documentation/media/uapi/v4l/dev-raw-vbi_files/vbi_625.pdf b/Documentation/media/uapi/v4l/dev-raw-vbi_files/vbi_625.pdf
index 765235e33a4de256a0b3fbf64ffe52946190cac4..f672b52ef683b3b6da4a43167f67ecbecfd6dc36 100644
GIT binary patch
delta 18
ZcmaDX^HgR-AtP%{w54Ut<`TyDJOD)g2G9Ti
delta 16
XcmaDV^H^p>AtQ6NrRC-_#`in`I2#5S
diff --git a/Documentation/media/uapi/v4l/dev-sdr.rst b/Documentation/media/uapi/v4l/dev-sdr.rst
index fc4053f957fb..2bb560580b75 100644
--- a/Documentation/media/uapi/v4l/dev-sdr.rst
+++ b/Documentation/media/uapi/v4l/dev-sdr.rst
@@ -110,7 +110,7 @@ data transfer, set by the driver in order to inform application.
- __u8
- - ``reserved[24]``
+ - ``reserved\[24\]``
- This array is reserved for future extensions. Drivers and
applications must set it to zero.
diff --git a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst
index ec52a825f4d6..7df760367021 100644
--- a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst
+++ b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst
@@ -140,7 +140,7 @@ struct v4l2_sliced_vbi_format
- __u16
- - ``service_lines``\ [2][24]
+ - ``service_lines``\ \[2\]\[24\]
- :cspan:`2`
@@ -170,7 +170,7 @@ struct v4l2_sliced_vbi_format
-
-
- - ``service_lines``\ [0][1]
+ - ``service_lines``\ \[0\]\[1\]
- 1
@@ -180,7 +180,7 @@ struct v4l2_sliced_vbi_format
-
-
- - ``service_lines``\ [0][23]
+ - ``service_lines``\ \[0\]\[23\]
- 23
@@ -190,7 +190,7 @@ struct v4l2_sliced_vbi_format
-
-
- - ``service_lines``\ [1][1]
+ - ``service_lines``\ \[1\]\[1\]
- 264
@@ -200,7 +200,7 @@ struct v4l2_sliced_vbi_format
-
-
- - ``service_lines``\ [1][23]
+ - ``service_lines``\ \[1\]\[23\]
- 286
@@ -210,8 +210,8 @@ struct v4l2_sliced_vbi_format
-
-
- - :cspan:`2` Drivers must set ``service_lines`` [0][0] and
- ``service_lines``\ [1][0] to zero. The
+ - :cspan:`2` Drivers must set ``service_lines`` \[0\]\[0\] and
+ ``service_lines``\ \[1\]\[0\] to zero. The
``V4L2_VBI_ITU_525_F1_START``, ``V4L2_VBI_ITU_525_F2_START``,
``V4L2_VBI_ITU_625_F1_START`` and ``V4L2_VBI_ITU_625_F2_START``
defines give the start line numbers for each field for each 525 or
@@ -238,7 +238,7 @@ struct v4l2_sliced_vbi_format
- __u32
- - ``reserved``\ [2]
+ - ``reserved``\ \[2\]
- :cspan:`2` This array is reserved for future extensions.
Applications and drivers must set it to zero.
@@ -427,7 +427,7 @@ struct v4l2_sliced_vbi_data
- __u8
- - ``data``\ [48]
+ - ``data``\ \[48\]
- The packet payload. See :ref:`vbi-services` for the contents and
number of bytes passed for each data type. The contents of padding
@@ -566,7 +566,7 @@ struct v4l2_mpeg_vbi_fmt_ivtv
- __u8
- - ``magic``\ [4]
+ - ``magic``\ \[4\]
-
- A "magic" constant from :ref:`v4l2-mpeg-vbi-fmt-ivtv-magic` that
@@ -662,7 +662,7 @@ struct v4l2_mpeg_vbi_itv0
- __le32
- - ``linemask``\ [2]
+ - ``linemask``\ \[2\]
- Bitmasks indicating the VBI service lines present. These
``linemask`` values are stored in little endian byte order in the
@@ -675,30 +675,30 @@ struct v4l2_mpeg_vbi_itv0
::
- linemask[0] b0: line 6 first field
- linemask[0] b17: line 23 first field
- linemask[0] b18: line 6 second field
- linemask[0] b31: line 19 second field
- linemask[1] b0: line 20 second field
- linemask[1] b3: line 23 second field
- linemask[1] b4-b31: unused and set to 0
+ linemask\[0\] b0: line 6 first field
+ linemask\[0\] b17: line 23 first field
+ linemask\[0\] b18: line 6 second field
+ linemask\[0\] b31: line 19 second field
+ linemask\[1\] b0: line 20 second field
+ linemask\[1\] b3: line 23 second field
+ linemask\[1\] b4-b31: unused and set to 0
- .. row 2
- struct
:ref:`v4l2_mpeg_vbi_itv0_line <v4l2-mpeg-vbi-itv0-line>`
- - ``line``\ [35]
+ - ``line``\ \[35\]
- This is a variable length array that holds from 1 to 35 lines of
sliced VBI data. The sliced VBI data lines present correspond to
the bits set in the ``linemask`` array, starting from b\ :sub:`0`
- of ``linemask``\ [0] up through b\ :sub:`31` of ``linemask``\ [0],
- and from b\ :sub:`0` of ``linemask``\ [1] up through b\ :sub:`3` of
- ``linemask``\ [1]. ``line``\ [0] corresponds to the first bit
- found set in the ``linemask`` array, ``line``\ [1] corresponds to
+ of ``linemask``\ \[0\] up through b\ :sub:`31` of ``linemask``\ \[0\],
+ and from b\ :sub:`0` of ``linemask``\ \[1\] up through b\ :sub:`3` of
+ ``linemask``\ \[1\]. ``line``\ \[0\] corresponds to the first bit
+ found set in the ``linemask`` array, ``line``\ \[1\] corresponds to
the second bit found set in the ``linemask`` array, etc. If no
- ``linemask`` array bits are set, then ``line``\ [0] may contain
+ ``linemask`` array bits are set, then ``line``\ \[0\] may contain
one line of unspecified data that should be ignored by
applications.
@@ -720,11 +720,11 @@ struct v4l2_mpeg_vbi_ITV0
- struct
:ref:`v4l2_mpeg_vbi_itv0_line <v4l2-mpeg-vbi-itv0-line>`
- - ``line``\ [36]
+ - ``line``\ \[36\]
- - A fixed length array of 36 lines of sliced VBI data. ``line``\ [0]
- through ``line``\ [17] correspond to lines 6 through 23 of the
- first field. ``line``\ [18] through ``line``\ [35] corresponds to
+ - A fixed length array of 36 lines of sliced VBI data. ``line``\ \[0\]
+ through ``line``\ \[17\] correspond to lines 6 through 23 of the
+ first field. ``line``\ \[18\] through ``line``\ \[35\] corresponds to
lines 6 through 23 of the second field.
@@ -754,7 +754,7 @@ struct v4l2_mpeg_vbi_itv0_line
- __u8
- - ``data``\ [42]
+ - ``data``\ \[42\]
- The sliced VBI data for the line.
diff --git a/Documentation/media/uapi/v4l/hist-v4l2.rst b/Documentation/media/uapi/v4l/hist-v4l2.rst
index 3ba1c0c2df1a..3882fc7782d0 100644
--- a/Documentation/media/uapi/v4l/hist-v4l2.rst
+++ b/Documentation/media/uapi/v4l/hist-v4l2.rst
@@ -266,7 +266,7 @@ V4L2 Version 0.20 2000-11-23
A number of changes were made to the raw VBI interface.
1. Figures clarifying the line numbering scheme were added to the V4L2
- API specification. The ``start``\ [0] and ``start``\ [1] fields no
+ API specification. The ``start``\ \[0\] and ``start``\ \[1\] fields no
longer count line numbers beginning at zero. Rationale: a) The
previous definition was unclear. b) The ``start``\ [] values are
ordinal numbers. c) There is no point in inventing a new line
@@ -274,8 +274,8 @@ A number of changes were made to the raw VBI interface.
Compatibility: Add one to the start values. Applications depending on
the previous semantics may not function correctly.
-2. The restriction "count[0] > 0 and count[1] > 0" has been relaxed to
- "(count[0] + count[1]) > 0". Rationale: Drivers may allocate
+2. The restriction "count\[0\] > 0 and count\[1\] > 0" has been relaxed to
+ "(count\[0\] + count\[1\]) > 0". Rationale: Drivers may allocate
resources at scan line granularity and some data services are
transmitted only on the first field. The comment that both ``count``
values will usually be equal is misleading and pointless and has been
@@ -649,7 +649,7 @@ This unnamed version was finally merged into Linux 2.5.46.
memory. It was barely useful and so was removed.
14. In struct :ref:`v4l2_framebuffer <v4l2-framebuffer>` the
- ``base[3]`` array anticipating double- and triple-buffering in
+ ``base\[3\]`` array anticipating double- and triple-buffering in
off-screen video memory, however without defining a synchronization
mechanism, was replaced by a single pointer. The
``V4L2_FBUF_CAP_SCALEUP`` and ``V4L2_FBUF_CAP_SCALEDOWN`` flags were
@@ -833,7 +833,7 @@ V4L2 in Linux 2.6.6, 2004-05-09
V4L2 in Linux 2.6.8
===================
-1. A new field ``input`` (former ``reserved[0]``) was added to the
+1. A new field ``input`` (former ``reserved\[0\]``) was added to the
struct :ref:`v4l2_buffer <v4l2-buffer>` structure. Purpose of this
field is to alternate between video inputs (e. g. cameras) in step
with the video capturing process. This function must be enabled with
diff --git a/Documentation/media/uapi/v4l/pixfmt-003.rst b/Documentation/media/uapi/v4l/pixfmt-003.rst
index 25c54872fbe1..d6a80d16afbc 100644
--- a/Documentation/media/uapi/v4l/pixfmt-003.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-003.rst
@@ -41,7 +41,7 @@ describing all planes of that format.
- __u16
- - ``reserved[6]``
+ - ``reserved\[6\]``
- Reserved for future extensions. Should be zeroed by drivers and
applications.
@@ -160,7 +160,7 @@ describing all planes of that format.
- __u8
- - ``reserved[7]``
+ - ``reserved\[7\]``
- Reserved for future extensions. Should be zeroed by drivers and
applications.
diff --git a/Documentation/media/uapi/v4l/subdev-formats.rst b/Documentation/media/uapi/v4l/subdev-formats.rst
index 6dbb27b09c34..c365cf116308 100644
--- a/Documentation/media/uapi/v4l/subdev-formats.rst
+++ b/Documentation/media/uapi/v4l/subdev-formats.rst
@@ -92,7 +92,7 @@ Media Bus Formats
- __u16
- - ``reserved``\ [11]
+ - ``reserved``\ \[11\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/v4l2grab.c.rst b/Documentation/media/uapi/v4l/v4l2grab.c.rst
index 5aabd0b7b089..5d0263aab18c 100644
--- a/Documentation/media/uapi/v4l/v4l2grab.c.rst
+++ b/Documentation/media/uapi/v4l/v4l2grab.c.rst
@@ -62,7 +62,7 @@ file: media/v4l/v4l2grab.c
int r, fd = -1;
unsigned int i, n_buffers;
char *dev_name = "/dev/video0";
- char out_name[256];
+ char out_name\[256\];
FILE *fout;
struct buffer *buffers;
diff --git a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst
index abdc0b4d83d5..45c28af5c523 100644
--- a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst
+++ b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst
@@ -125,7 +125,7 @@ than the number requested.
- __u32
- - ``reserved``\ [8]
+ - ``reserved``\ \[8\]
- A place holder for future extensions. Drivers and applications
must set the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst
index f7e1b80af29e..4c683a3457c2 100644
--- a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst
+++ b/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst
@@ -115,7 +115,7 @@ instructions.
-
- char
- - ``name[32]``
+ - ``name\[32\]``
- Match a chip by this name, interpreted according to the ``type``
field. Currently unused.
@@ -142,7 +142,7 @@ instructions.
- char
- - ``name[32]``
+ - ``name\[32\]``
- The name of the chip.
@@ -161,7 +161,7 @@ instructions.
- __u32
- - ``reserved[8]``
+ - ``reserved\[8\]``
- Reserved fields, both application and driver must set these to 0.
diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst
index 09d2880e6170..d8ab629b087d 100644
--- a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst
+++ b/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst
@@ -123,7 +123,7 @@ instructions.
-
- char
- - ``name[32]``
+ - ``name\[32\]``
- Match a chip by this name, interpreted according to the ``type``
field. Currently unused.
diff --git a/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst b/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst
index 2a36e91b57b9..24419de4230e 100644
--- a/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst
+++ b/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst
@@ -178,7 +178,7 @@ introduced in Linux 3.3.
-
- __u32
- - ``data``\ [16]
+ - ``data``\ \[16\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-dqevent.rst b/Documentation/media/uapi/v4l/vidioc-dqevent.rst
index 73c0d5be62ee..f426b195ceb8 100644
--- a/Documentation/media/uapi/v4l/vidioc-dqevent.rst
+++ b/Documentation/media/uapi/v4l/vidioc-dqevent.rst
@@ -116,7 +116,7 @@ call.
-
- __u8
- - ``data``\ [64]
+ - ``data``\ \[64\]
- Event data. Defined by the event type. The union should be used to
define easily accessible type for events.
@@ -167,7 +167,7 @@ call.
- __u32
- - ``reserved``\ [8]
+ - ``reserved``\ \[8\]
-
- Reserved for future extensions. Drivers must set the array to
diff --git a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst b/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst
index 6e05957013bb..1a78407896fe 100644
--- a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst
+++ b/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst
@@ -130,7 +130,7 @@ that doesn't support them will return an ``EINVAL`` error code.
- __u32
- - ``reserved``\ [16]
+ - ``reserved``\ \[16\]
- Reserved for future extensions. Drivers must set the array to
zero.
@@ -167,7 +167,7 @@ that doesn't support them will return an ``EINVAL`` error code.
- __u32
- - ``reserved``\ [2]
+ - ``reserved``\ \[2\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
@@ -193,7 +193,7 @@ that doesn't support them will return an ``EINVAL`` error code.
-
- __u32
- - ``raw_data``\ [32]
+ - ``raw_data``\ \[32\]
-
diff --git a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst b/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst
index 69bd9b4e0e56..19b86603f4d7 100644
--- a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst
+++ b/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst
@@ -94,7 +94,7 @@ introduced in Linux 2.6.21.
- __u32
- - ``data``\ [8]
+ - ``data``\ \[8\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst
index 3ba75d3fb93c..71e0ae65abd1 100644
--- a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst
+++ b/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst
@@ -92,7 +92,7 @@ return an ``EINVAL`` error code.
- __u32
- - ``reserved``\ [2]
+ - ``reserved``\ \[2\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst
index 90996f69d6ae..3846009a39a7 100644
--- a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst
+++ b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst
@@ -86,7 +86,7 @@ one until ``EINVAL`` is returned.
- __u8
- - ``description``\ [32]
+ - ``description``\ \[32\]
- Description of the format, a NUL-terminated ASCII string. This
information is intended for the user, for example: "YUV 4:2:2".
@@ -120,7 +120,7 @@ one until ``EINVAL`` is returned.
- __u32
- - ``reserved``\ [4]
+ - ``reserved``\ \[4\]
- Reserved for future extensions. Drivers must set the array to
zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst b/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst
index ceae6003039e..6a2060b4a35c 100644
--- a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst
+++ b/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst
@@ -217,7 +217,7 @@ application should zero out all members except for the *IN* fields.
- __u32
- - ``reserved[2]``
+ - ``reserved\[2\]``
-
- Reserved space for future use. Must be zeroed by drivers and
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst b/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst
index 8b268354d442..7a6a43b519df 100644
--- a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst
+++ b/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst
@@ -238,7 +238,7 @@ application should zero out all members except for the *IN* fields.
- __u32
- - ``reserved[2]``
+ - ``reserved\[2\]``
-
- Reserved space for future use. Must be zeroed by drivers and
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst b/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst
index 00ab5e19cc1d..19e86cfdbf39 100644
--- a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst
+++ b/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst
@@ -140,7 +140,7 @@ of the corresponding tuner/modulator is set.
- __u32
- - ``reserved``\ [9]
+ - ``reserved``\ \[9\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-enuminput.rst b/Documentation/media/uapi/v4l/vidioc-enuminput.rst
index 5060f54e3d18..1ea77135683a 100644
--- a/Documentation/media/uapi/v4l/vidioc-enuminput.rst
+++ b/Documentation/media/uapi/v4l/vidioc-enuminput.rst
@@ -61,7 +61,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``.
- __u8
- - ``name``\ [32]
+ - ``name``\ \[32\]
- Name of the video input, a NUL-terminated ASCII string, for
example: "Vin (Composite 2)". This information is intended for the
@@ -141,7 +141,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``.
- __u32
- - ``reserved``\ [3]
+ - ``reserved``\ \[3\]
- Reserved for future extensions. Drivers must set the array to
zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst b/Documentation/media/uapi/v4l/vidioc-enumoutput.rst
index 82fc9d3b237f..83397f29903c 100644
--- a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst
+++ b/Documentation/media/uapi/v4l/vidioc-enumoutput.rst
@@ -62,7 +62,7 @@ EINVAL.
- __u8
- - ``name``\ [32]
+ - ``name``\ \[32\]
- Name of the video output, a NUL-terminated ASCII string, for
example: "Vout". This information is intended for the user,
@@ -131,7 +131,7 @@ EINVAL.
- __u32
- - ``reserved``\ [3]
+ - ``reserved``\ \[3\]
- Reserved for future extensions. Drivers must set the array to
zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-enumstd.rst b/Documentation/media/uapi/v4l/vidioc-enumstd.rst
index 6699b26cdeb4..e68a62803ac2 100644
--- a/Documentation/media/uapi/v4l/vidioc-enumstd.rst
+++ b/Documentation/media/uapi/v4l/vidioc-enumstd.rst
@@ -78,7 +78,7 @@ or output. [#f1]_
- __u8
- - ``name``\ [24]
+ - ``name``\ \[24\]
- Name of the standard, a NUL-terminated ASCII string, for example:
"PAL-B/G", "NTSC Japan". This information is intended for the
@@ -105,7 +105,7 @@ or output. [#f1]_
- __u32
- - ``reserved``\ [4]
+ - ``reserved``\ \[4\]
- Reserved for future extensions. Drivers must set the array to
zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-expbuf.rst b/Documentation/media/uapi/v4l/vidioc-expbuf.rst
index ded708e647fa..bf7e644f9ff0 100644
--- a/Documentation/media/uapi/v4l/vidioc-expbuf.rst
+++ b/Documentation/media/uapi/v4l/vidioc-expbuf.rst
@@ -179,7 +179,7 @@ Examples
- __u32
- - ``reserved[11]``
+ - ``reserved\[11\]``
- Reserved field for future use. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-audio.rst b/Documentation/media/uapi/v4l/vidioc-g-audio.rst
index cccbcdb8c463..0a023c2b67ea 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-audio.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-audio.rst
@@ -70,7 +70,7 @@ return the actual new audio mode.
- __u8
- - ``name``\ [32]
+ - ``name``\ \[32\]
- Name of the audio input, a NUL-terminated ASCII string, for
example: "Line In". This information is intended for the user,
@@ -97,7 +97,7 @@ return the actual new audio mode.
- __u32
- - ``reserved``\ [2]
+ - ``reserved``\ \[2\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst b/Documentation/media/uapi/v4l/vidioc-g-audioout.rst
index b1c1bfeb251e..6442cb74ec94 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-audioout.rst
@@ -75,7 +75,7 @@ as ``VIDIOC_G_AUDOUT`` does.
- __u8
- - ``name``\ [32]
+ - ``name``\ \[32\]
- Name of the audio output, a NUL-terminated ASCII string, for
example: "Line Out". This information is intended for the user,
@@ -103,7 +103,7 @@ as ``VIDIOC_G_AUDOUT`` does.
- __u32
- - ``reserved``\ [2]
+ - ``reserved``\ \[2\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
index f7bf21f49092..5c6aa7ae341e 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
@@ -259,7 +259,7 @@ EBUSY
-
- __u32
- - ``reserved``\ [32]
+ - ``reserved``\ \[32\]
-
diff --git a/Documentation/media/uapi/v4l/vidioc-g-edid.rst b/Documentation/media/uapi/v4l/vidioc-g-edid.rst
index 1a982b68a72f..cf0d100863ca 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-edid.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-edid.rst
@@ -131,7 +131,7 @@ EDID is no longer available.
- __u32
- - ``reserved``\ [5]
+ - ``reserved``\ \[5\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst b/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst
index f0f41ac56b80..27b8c84dad6a 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst
@@ -86,7 +86,7 @@ video elementary streams.
- __u32
- - ``reserved``\ [4]
+ - ``reserved``\ \[4\]
- :cspan:`2` Reserved for future extensions. Drivers must set the
array to zero.
@@ -153,7 +153,7 @@ video elementary streams.
- __u32
- - ``reserved``\ [2]
+ - ``reserved``\ \[2\]
- Reserved for future extensions. Drivers must set the array to
zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst
index 39e24ad4b825..74998e028864 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst
@@ -136,7 +136,7 @@ still cause this situation.
- __u32
- - ``reserved2``\ [1]
+ - ``reserved2``\ \[1\]
-
- Reserved for future extensions. Drivers and applications must set
@@ -338,7 +338,7 @@ still cause this situation.
- __u32
- - ``reserved``\ [2]
+ - ``reserved``\ \[2\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
index ee6f11978fd6..9dc9e1e203a4 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
@@ -171,7 +171,7 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical
-
- __u8
- - ``raw_data``\ [200]
+ - ``raw_data``\ \[200\]
- Place holder for future extensions.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst b/Documentation/media/uapi/v4l/vidioc-g-frequency.rst
index a1fd2a870de4..8944f3bb5adb 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-frequency.rst
@@ -102,7 +102,7 @@ write-only ioctl, it does not return the actual new frequency.
- __u32
- - ``reserved``\ [8]
+ - ``reserved``\ \[8\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst b/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst
index f5bf8b7915ed..6e084d3c30bb 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst
@@ -94,7 +94,7 @@ encoding. You usually do want to add them.
- char
- - ``APP_data``\ [60]
+ - ``APP_data``\ \[60\]
-
@@ -110,7 +110,7 @@ encoding. You usually do want to add them.
- char
- - ``COM_data``\ [60]
+ - ``COM_data``\ \[60\]
-
diff --git a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst b/Documentation/media/uapi/v4l/vidioc-g-modulator.rst
index a2e8c73f0678..ee4cfc07f756 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-modulator.rst
@@ -81,7 +81,7 @@ To change the radio frequency the
- __u8
- - ``name``\ [32]
+ - ``name``\ \[32\]
- Name of the modulator, a NUL-terminated ASCII string. This
information is intended for the user.
@@ -149,7 +149,7 @@ To change the radio frequency the
- __u32
- - ``reserved``\ [3]
+ - ``reserved``\ \[3\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-parm.rst b/Documentation/media/uapi/v4l/vidioc-g-parm.rst
index 7116e0decddc..80378272cdef 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-parm.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-parm.rst
@@ -103,7 +103,7 @@ union holding separate parameters for input and output devices.
-
- __u8
- - ``raw_data``\ [200]
+ - ``raw_data``\ \[200\]
- A place holder for future extensions.
@@ -183,7 +183,7 @@ union holding separate parameters for input and output devices.
- __u32
- - ``reserved``\ [4]
+ - ``reserved``\ \[4\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
@@ -271,7 +271,7 @@ union holding separate parameters for input and output devices.
- __u32
- - ``reserved``\ [4]
+ - ``reserved``\ \[4\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-g-selection.rst
index 953931fabd00..e17ff45bd208 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-selection.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-selection.rst
@@ -182,7 +182,7 @@ Selection targets and flags are documented in
- __u32
- - ``reserved[9]``
+ - ``reserved\[9\]``
- Reserved fields for future use. Drivers and applications must zero
this array.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst
index f1f661d0200c..b9c44b22cda1 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst
@@ -65,7 +65,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
- __u16
- - ``service_lines``\ [2][24]
+ - ``service_lines``\ \[2\]\[24\]
- :cspan:`2` Each element of this array contains a set of data
services the hardware can look for or insert into a particular
@@ -87,7 +87,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
-
-
- - ``service_lines``\ [0][1]
+ - ``service_lines``\ \[0\]\[1\]
- 1
@@ -97,7 +97,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
-
-
- - ``service_lines``\ [0][23]
+ - ``service_lines``\ \[0\]\[23\]
- 23
@@ -107,7 +107,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
-
-
- - ``service_lines``\ [1][1]
+ - ``service_lines``\ \[1\]\[1\]
- 264
@@ -117,7 +117,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
-
-
- - ``service_lines``\ [1][23]
+ - ``service_lines``\ \[1\]\[23\]
- 286
@@ -147,8 +147,8 @@ the sliced VBI API is unsupported or ``type`` is invalid.
-
-
- - :cspan:`2` Drivers must set ``service_lines`` [0][0] and
- ``service_lines``\ [1][0] to zero.
+ - :cspan:`2` Drivers must set ``service_lines`` \[0\]\[0\] and
+ ``service_lines``\ \[1\]\[0\] to zero.
- .. row 12
@@ -164,7 +164,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
- __u32
- - ``reserved``\ [3]
+ - ``reserved``\ \[3\]
- :cspan:`2` This array is reserved for future extensions.
Applications and drivers must set it to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst
index 614db06b8b4b..f9b0bfeef859 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst
@@ -79,7 +79,7 @@ To change the radio frequency the
- __u8
- - ``name``\ [32]
+ - ``name``\ \[32\]
- :cspan:`1`
@@ -246,7 +246,7 @@ To change the radio frequency the
- __u32
- - ``reserved``\ [4]
+ - ``reserved``\ \[4\]
- :cspan:`1` Reserved for future extensions. Drivers and
applications must set the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-querycap.rst b/Documentation/media/uapi/v4l/vidioc-querycap.rst
index b10fed313f99..769a554dd8b9 100644
--- a/Documentation/media/uapi/v4l/vidioc-querycap.rst
+++ b/Documentation/media/uapi/v4l/vidioc-querycap.rst
@@ -53,7 +53,7 @@ specification the ioctl returns an ``EINVAL`` error code.
- __u8
- - ``driver``\ [16]
+ - ``driver``\ \[16\]
- Name of the driver, a unique NUL-terminated ASCII string. For
example: "bttv". Driver specific applications can use this
@@ -69,7 +69,7 @@ specification the ioctl returns an ``EINVAL`` error code.
- __u8
- - ``card``\ [32]
+ - ``card``\ \[32\]
- Name of the device, a NUL-terminated UTF-8 string. For example:
"Yoyodyne TV/FM". One driver may support different brands or
@@ -84,7 +84,7 @@ specification the ioctl returns an ``EINVAL`` error code.
- __u8
- - ``bus_info``\ [32]
+ - ``bus_info``\ \[32\]
- Location of the device in the system, a NUL-terminated ASCII
string. For example: "PCI:0000:05:06.0". This information is
@@ -166,7 +166,7 @@ specification the ioctl returns an ``EINVAL`` error code.
- __u32
- - ``reserved``\ [3]
+ - ``reserved``\ \[3\]
- Reserved for future extensions. Drivers must set this array to
zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
index 8d6e61a7284d..72bc7b1b067c 100644
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
@@ -124,7 +124,7 @@ See also the examples in :ref:`control`.
- __u8
- - ``name``\ [32]
+ - ``name``\ \[32\]
- Name of the control, a NUL-terminated ASCII string. This
information is intended for the user.
@@ -203,7 +203,7 @@ See also the examples in :ref:`control`.
- __u32
- - ``reserved``\ [2]
+ - ``reserved``\ \[2\]
- Reserved for future extensions. Drivers must set the array to
zero.
@@ -245,7 +245,7 @@ See also the examples in :ref:`control`.
- char
- - ``name``\ [32]
+ - ``name``\ \[32\]
- Name of the control, a NUL-terminated ASCII string. This
information is intended for the user.
@@ -326,7 +326,7 @@ See also the examples in :ref:`control`.
- The size in bytes of a single element of the array. Given a char
pointer ``p`` to a 3-dimensional array you can find the position
of cell ``(z, y, x)`` as follows:
- ``p + ((z * dims[1] + y) * dims[0] + x) * elem_size``.
+ ``p + ((z * dims\[1\] + y) * dims\[0\] + x) * elem_size``.
``elem_size`` is always valid, also when the control isn't an
array. For string controls ``elem_size`` is equal to
``maximum + 1``.
@@ -363,7 +363,7 @@ See also the examples in :ref:`control`.
- __u32
- - ``reserved``\ [32]
+ - ``reserved``\ \[32\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
@@ -410,7 +410,7 @@ See also the examples in :ref:`control`.
-
- __u8
- - ``name``\ [32]
+ - ``name``\ \[32\]
- Name of the menu item, a NUL-terminated ASCII string. This
information is intended for the user. This field is valid for
diff --git a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst
index 5d0bc6d31c07..75dc34548ab7 100644
--- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst
+++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst
@@ -107,7 +107,7 @@ any DMA in progress, an implicit
- __u32
- - ``reserved``\ [2]
+ - ``reserved``\ \[2\]
- A place holder for future extensions. Drivers and applications
must set the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst
index 5fd332a5bfee..c96d2edbf72a 100644
--- a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst
+++ b/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst
@@ -150,7 +150,7 @@ error code is returned and no seek takes place.
- __u32
- - ``reserved``\ [5]
+ - ``reserved``\ \[5\]
- Reserved for future extensions. Applications must set the array to
zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst
index 0aa6482a91a6..f472ea27f9c0 100644
--- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst
+++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst
@@ -132,7 +132,7 @@ multiple pads of the same sub-device is not defined.
- __u32
- - ``reserved``\ [8]
+ - ``reserved``\ \[8\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst
index 7a5811b71b68..8fcbdc1e73fe 100644
--- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst
+++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst
@@ -142,7 +142,7 @@ information about try formats.
- __u32
- - ``reserved``\ [8]
+ - ``reserved``\ \[8\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst
index bc0531eb56fa..3cb62dff3300 100644
--- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst
+++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst
@@ -95,7 +95,7 @@ information about the try formats.
- __u32
- - ``reserved``\ [8]
+ - ``reserved``\ \[8\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst
index ae802f1594e7..7f39d38303e7 100644
--- a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst
+++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst
@@ -109,7 +109,7 @@ modified format should be as close as possible to the original request.
- __u32
- - ``reserved``\ [8]
+ - ``reserved``\ \[8\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst
index 90e2a6635ebc..b7f2aca64422 100644
--- a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst
+++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst
@@ -113,7 +113,7 @@ should be as close as possible to the original request.
- __u32
- - ``reserved``\ [8]
+ - ``reserved``\ \[8\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst
index d8a1cabbd272..bcb1aae43e82 100644
--- a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst
+++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst
@@ -95,7 +95,7 @@ the same sub-device is not defined.
- __u32
- - ``reserved``\ [9]
+ - ``reserved``\ \[9\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst
index 50838a4a429e..7d6611f0f9d5 100644
--- a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst
+++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst
@@ -117,7 +117,7 @@ Selection targets and flags are documented in
- __u32
- - ``reserved``\ [8]
+ - ``reserved``\ \[8\]
- Reserved for future extensions. Applications and drivers must set
the array to zero.
diff --git a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst b/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst
index 3ed91c627702..7c00c93c2d95 100644
--- a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst
+++ b/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst
@@ -79,7 +79,7 @@ using the :ref:`VIDIOC_DQEVENT` ioctl.
- __u32
- - ``reserved``\ [5]
+ - ``reserved``\ \[5\]
- Reserved for future extensions. Drivers and applications must set
the array to zero.
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
