Cc: Joseph Jezak <josejx@xxxxxxxxxx>
Cc: Jörg Sommer <joerg@xxxxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Signed-off-by: Stephan Linz <linz@xxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
---
Changes in v5:
- Keep documentation for the old 'ide-disk' device tree
binding, but mark as deprecated and refer to the new
trigger 'disk-activity'.
Changes in v4:
- Keep the 'ide-disk' trigger and add a second one
for 'disk-activity'.
Changes in v3:
- Port to kernel 4.x
- Split into platform independent and dependent parts.
v2: https://patchwork.ozlabs.org/patch/117485/
v1: http://dev.gentoo.org/~josejx/ata.patch
---
Documentation/devicetree/bindings/leds/common.txt | 5 ++++-
Documentation/devicetree/bindings/leds/leds-gpio.txt | 4 ++--
Documentation/laptops/asus-laptop.txt | 2 +-
Documentation/leds/leds-class.txt | 2 +-
4 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index af10678..1c32e31 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -25,8 +25,11 @@ Optional properties for child nodes:
system
"default-on" - LED will turn on (but for leds-gpio see "default-state"
property in Documentation/devicetree/bindings/gpio/led.txt)
+ "disk-activity" - LED indicates disk activity, the old name "ide-disk" is
+ still valid for backward compatibility
"heartbeat" - LED "double" flashes at a load average based rate
- "ide-disk" - LED indicates disk activity
+ "ide-disk" - LED indicates IDE disk activity (deprecated), do not use for
+ new implementation, use the new "disk-activity" name instead
"timer" - LED flashes at a fixed, configurable rate
- led-max-microamp : Maximum LED supply current in microamperes. This property
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index cbbeb18..5b1b43a 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -33,9 +33,9 @@ Examples:
leds {
compatible = "gpio-leds";
hdd {
- label = "IDE Activity";
+ label = "Disk Activity";
gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ide-disk";
+ linux,default-trigger = "disk-activity";
};
fault {
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index 79a1bc6..5f28587 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -72,7 +72,7 @@ LEDs
echo 1 > /sys/class/leds/asus::mail/brightness
will switch the mail LED on.
You can also know if they are on/off by reading their content and use
- kernel triggers like ide-disk or heartbeat.
+ kernel triggers like disk-activity or heartbeat.
Backlight
---------
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index 44f5e6b..f1f7ec9 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -11,7 +11,7 @@ brightness support so will just be turned on for non-zero brightness settings.
The class also introduces the optional concept of an LED trigger. A trigger
is a kernel based source of led events. Triggers can either be simple or
complex. A simple trigger isn't configurable and is designed to slot into
-existing subsystems with minimal additional code. Examples are the ide-disk,
+existing subsystems with minimal additional code. Examples are the disk-activity,
nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
optimises away.
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
