On Mon, Jun 20, 2016 at 09:50:49AM -0500, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote: > From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx> > > Add the device tree bindings needed to support the Altera Ethernet > FIFO buffers on the Arria10 chip. > > Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx> > --- > v2 No Change > v3 Change to common compatible string based on maintainer comments > Add local IRQ values. > v4 Add compatible string for parent node. > --- > .../bindings/arm/altera/socfpga-eccmgr.txt | 24 ++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt > index 15eb0df..7c714ba 100644 > --- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt > +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt > @@ -82,6 +82,14 @@ Required Properties: > - interrupts : Should be single bit error interrupt, then double bit error > interrupt, in this order. > > +Ethernet FIFO ECC > +Required Properties: > +- compatible : Should be "altr,socfpga-eth-mac-ecc" > +- reg : Address and size for ECC block registers. > +- parent : phandle to parent (altr,socfpga-stmmac) Ethernet node. Sorry if I wasn't clear before, but I was suggesting changing 'parent' to 'altr,ethernet-mac': altr,ethernet-mac = <&gmac0>; Rob -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
