Re: [PATCH v3 3/4] x86, boot: Implement ASLR for kernel memory sections (x86_64)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 10, 2016 at 11:53 AM, Kees Cook <keescook@xxxxxxxxxxxx> wrote:
> On Tue, May 3, 2016 at 12:31 PM, Thomas Garnier <thgarnie@xxxxxxxxxx> wrote:
>> Randomizes the virtual address space of kernel memory sections (physical
>> memory mapping, vmalloc & vmemmap) for x86_64. This security feature
>> mitigates exploits relying on predictable kernel addresses. These
>> addresses can be used to disclose the kernel modules base addresses or
>> corrupt specific structures to elevate privileges bypassing the current
>> implementation of KASLR. This feature can be enabled with the
>> CONFIG_RANDOMIZE_MEMORY option.
>
> I'm struggling to come up with a more accurate name for this, since
> it's a base randomization of the kernel memory sections. Everything
> else seems needlessly long (CONFIG_RANDOMIZE_BASE_MEMORY). I wonder if
> things should be renamed generally to CONFIG_KASLR_BASE,
> CONFIG_KASLR_MEMORY, etc, but that doesn't need to be part of this
> series. Let's leave this as-is, and just make sure it's clear in the
> Kconfig.
>

I agree, leaving it like this for now.

>> The physical memory mapping holds most allocations from boot and heap
>> allocators. Knowning the base address and physical memory size, an
>> attacker can deduce the PDE virtual address for the vDSO memory page.
>> This attack was demonstrated at CanSecWest 2016, in the "Getting
>  Physical Extreme Abuse of Intel Based Paged Systems"
>> https://goo.gl/ANpWdV (see second part of the presentation). The
>> exploits used against Linux worked successfuly against 4.6+ but fail
>> with KASLR memory enabled (https://goo.gl/iTtXMJ). Similar research
>> was done at Google leading to this patch proposal. Variants exists to
>> overwrite /proc or /sys objects ACLs leading to elevation of privileges.
>> These variants were testeda against 4.6+.
>
> Typo "tested".
>

Corrected for next iteration.

>>
>> The vmalloc memory section contains the allocation made through the
>> vmalloc api. The allocations are done sequentially to prevent
>> fragmentation and each allocation address can easily be deduced
>> especially from boot.
>>
>> The vmemmap section holds a representation of the physical
>> memory (through a struct page array). An attacker could use this section
>> to disclose the kernel memory layout (walking the page linked list).
>>
>> The order of each memory section is not changed. The feature looks at
>> the available space for the sections based on different configuration
>> options and randomizes the base and space between each. The size of the
>> physical memory mapping is the available physical memory. No performance
>> impact was detected while testing the feature.
>>
>> Entropy is generated using the KASLR early boot functions now shared in
>> the lib directory (originally written by Kees Cook). Randomization is
>> done on PGD & PUD page table levels to increase possible addresses. The
>> physical memory mapping code was adapted to support PUD level virtual
>> addresses. An additional low memory page is used to ensure each CPU can
>> start with a PGD aligned virtual address (for realmode).
>>
>> x86/dump_pagetable was updated to correctly display each section.
>>
>> Updated documentation on x86_64 memory layout accordingly.
>>
>> Performance data:
>>
>> Kernbench shows almost no difference (-+ less than 1%):
>>
>> Before:
>>
>> Average Optimal load -j 12 Run (std deviation):
>> Elapsed Time 102.63 (1.2695)
>> User Time 1034.89 (1.18115)
>> System Time 87.056 (0.456416)
>> Percent CPU 1092.9 (13.892)
>> Context Switches 199805 (3455.33)
>> Sleeps 97907.8 (900.636)
>>
>> After:
>>
>> Average Optimal load -j 12 Run (std deviation):
>> Elapsed Time 102.489 (1.10636)
>> User Time 1034.86 (1.36053)
>> System Time 87.764 (0.49345)
>> Percent CPU 1095 (12.7715)
>> Context Switches 199036 (4298.1)
>> Sleeps 97681.6 (1031.11)
>>
>> Hackbench shows 0% difference on average (hackbench 90
>> repeated 10 times):
>>
>> attemp,before,after
>> 1,0.076,0.069
>> 2,0.072,0.069
>> 3,0.066,0.066
>> 4,0.066,0.068
>> 5,0.066,0.067
>> 6,0.066,0.069
>> 7,0.067,0.066
>> 8,0.063,0.067
>> 9,0.067,0.065
>> 10,0.068,0.071
>> average,0.0677,0.0677
>>
>> Signed-off-by: Thomas Garnier <thgarnie@xxxxxxxxxx>
>> ---
>> Based on next-20160502
>> ---
>>  Documentation/x86/x86_64/mm.txt         |   4 +
>>  arch/x86/Kconfig                        |  15 ++++
>>  arch/x86/include/asm/kaslr.h            |  12 +++
>>  arch/x86/include/asm/page_64_types.h    |  11 ++-
>>  arch/x86/include/asm/pgtable_64.h       |   1 +
>>  arch/x86/include/asm/pgtable_64_types.h |  15 +++-
>>  arch/x86/kernel/head_64.S               |   2 +-
>>  arch/x86/kernel/setup.c                 |   3 +
>>  arch/x86/mm/Makefile                    |   1 +
>>  arch/x86/mm/dump_pagetables.c           |  11 ++-
>>  arch/x86/mm/init.c                      |   4 +
>>  arch/x86/mm/kaslr.c                     | 136 ++++++++++++++++++++++++++++++++
>>  arch/x86/realmode/init.c                |   4 +
>>  13 files changed, 211 insertions(+), 8 deletions(-)
>>  create mode 100644 arch/x86/mm/kaslr.c
>>
>> diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt
>> index 5aa7383..602a52d 100644
>> --- a/Documentation/x86/x86_64/mm.txt
>> +++ b/Documentation/x86/x86_64/mm.txt
>> @@ -39,4 +39,8 @@ memory window (this size is arbitrary, it can be raised later if needed).
>>  The mappings are not part of any other kernel PGD and are only available
>>  during EFI runtime calls.
>>
>> +Note that if CONFIG_RANDOMIZE_MEMORY is enabled, the direct mapping of all
>> +physical memory, vmalloc/ioremap space and virtual memory map are randomized.
>> +Their order is preserved but their base will be changed early at boot time.
>
> Maybe instead of "changed", say "offset"?
>

Corrected for next iteration.

>> +
>>  -Andi Kleen, Jul 2004
>> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
>> index 0b128b4..60f33c7 100644
>> --- a/arch/x86/Kconfig
>> +++ b/arch/x86/Kconfig
>> @@ -1988,6 +1988,21 @@ config PHYSICAL_ALIGN
>>
>>           Don't change this unless you know what you are doing.
>>
>> +config RANDOMIZE_MEMORY
>> +       bool "Randomize the kernel memory sections"
>> +       depends on X86_64
>> +       depends on RANDOMIZE_BASE
>
> Does this actually _depend_ on RANDOMIZE_BASE? It needs the
> lib/kaslr.c code, but this could operate without the kernel base
> address having been randomized, correct?
>

It could but I would rather group them. There is no value having one
without the other.

>> +       default n
>
> As such, maybe the default should be:
>
>     default RANDOMIZE_BASE
>

Changed for next iteration.

>> +       ---help---
>> +          Randomizes the virtual address of memory sections (physical memory
>
> How about: Randomizes the base virtual address of kernel memory sections ...
>

Changed for next iteration.

>> +          mapping, vmalloc & vmemmap). This security feature mitigates exploits
>> +          relying on predictable memory locations.
>
> And "This security feature makes exploits relying on predictable
> memory locations less reliable." ?
>

Changed for next iteration.

>> +
>> +          Base and padding between memory section is randomized. Their order is
>> +          not. Entropy is generated in the same way as RANDOMIZE_BASE.
>
> Since base would be mentioned above and padding is separate, I'd change this to:
>
> The order of allocations remains unchanged. Entropy is generated ...
>

Changed for next iteration.

>> +
>> +          If unsure, say N.
>> +
>>  config HOTPLUG_CPU
>>         bool "Support for hot-pluggable CPUs"
>>         depends on SMP
>> diff --git a/arch/x86/include/asm/kaslr.h b/arch/x86/include/asm/kaslr.h
>> index 2ae1429..12c7742 100644
>> --- a/arch/x86/include/asm/kaslr.h
>> +++ b/arch/x86/include/asm/kaslr.h
>> @@ -3,4 +3,16 @@
>>
>>  unsigned long kaslr_get_random_boot_long(void);
>>
>> +#ifdef CONFIG_RANDOMIZE_MEMORY
>> +extern unsigned long page_offset_base;
>> +extern unsigned long vmalloc_base;
>> +extern unsigned long vmemmap_base;
>> +
>> +void kernel_randomize_memory(void);
>> +void kaslr_trampoline_init(void);
>> +#else
>> +static inline void kernel_randomize_memory(void) { }
>> +static inline void kaslr_trampoline_init(void) { }
>> +#endif /* CONFIG_RANDOMIZE_MEMORY */
>> +
>>  #endif
>> diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
>> index d5c2f8b..9215e05 100644
>> --- a/arch/x86/include/asm/page_64_types.h
>> +++ b/arch/x86/include/asm/page_64_types.h
>> @@ -1,6 +1,10 @@
>>  #ifndef _ASM_X86_PAGE_64_DEFS_H
>>  #define _ASM_X86_PAGE_64_DEFS_H
>>
>> +#ifndef __ASSEMBLY__
>> +#include <asm/kaslr.h>
>> +#endif
>> +
>>  #ifdef CONFIG_KASAN
>>  #define KASAN_STACK_ORDER 1
>>  #else
>> @@ -32,7 +36,12 @@
>>   * hypervisor to fit.  Choosing 16 slots here is arbitrary, but it's
>>   * what Xen requires.
>>   */
>> -#define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
>> +#define __PAGE_OFFSET_BASE      _AC(0xffff880000000000, UL)
>> +#ifdef CONFIG_RANDOMIZE_MEMORY
>> +#define __PAGE_OFFSET           page_offset_base
>> +#else
>> +#define __PAGE_OFFSET           __PAGE_OFFSET_BASE
>> +#endif /* CONFIG_RANDOMIZE_MEMORY */
>>
>>  #define __START_KERNEL_map     _AC(0xffffffff80000000, UL)
>>
>> diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
>> index 2ee7811..0dfec89 100644
>> --- a/arch/x86/include/asm/pgtable_64.h
>> +++ b/arch/x86/include/asm/pgtable_64.h
>> @@ -21,6 +21,7 @@ extern pmd_t level2_fixmap_pgt[512];
>>  extern pmd_t level2_ident_pgt[512];
>>  extern pte_t level1_fixmap_pgt[512];
>>  extern pgd_t init_level4_pgt[];
>> +extern pgd_t trampoline_pgd_entry;
>>
>>  #define swapper_pg_dir init_level4_pgt
>>
>> diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
>> index e6844df..d388739 100644
>> --- a/arch/x86/include/asm/pgtable_64_types.h
>> +++ b/arch/x86/include/asm/pgtable_64_types.h
>> @@ -5,6 +5,7 @@
>>
>>  #ifndef __ASSEMBLY__
>>  #include <linux/types.h>
>> +#include <asm/kaslr.h>
>>
>>  /*
>>   * These are used to make use of C type-checking..
>> @@ -54,9 +55,17 @@ typedef struct { pteval_t pte; } pte_t;
>>
>>  /* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
>>  #define MAXMEM          _AC(__AC(1, UL) << MAX_PHYSMEM_BITS, UL)
>> -#define VMALLOC_START    _AC(0xffffc90000000000, UL)
>> -#define VMALLOC_END      _AC(0xffffe8ffffffffff, UL)
>> -#define VMEMMAP_START   _AC(0xffffea0000000000, UL)
>> +#define VMALLOC_SIZE_TB         _AC(32, UL)
>> +#define __VMALLOC_BASE  _AC(0xffffc90000000000, UL)
>> +#define __VMEMMAP_BASE  _AC(0xffffea0000000000, UL)
>> +#ifdef CONFIG_RANDOMIZE_MEMORY
>> +#define VMALLOC_START   vmalloc_base
>> +#define VMEMMAP_START   vmemmap_base
>> +#else
>> +#define VMALLOC_START   __VMALLOC_BASE
>> +#define VMEMMAP_START   __VMEMMAP_BASE
>> +#endif /* CONFIG_RANDOMIZE_MEMORY */
>> +#define VMALLOC_END      (VMALLOC_START + _AC((VMALLOC_SIZE_TB << 40) - 1, UL))
>>  #define MODULES_VADDR    (__START_KERNEL_map + KERNEL_IMAGE_SIZE)
>>  #define MODULES_END      _AC(0xffffffffff000000, UL)
>>  #define MODULES_LEN   (MODULES_END - MODULES_VADDR)
>> diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
>> index 5df831e..03a2aa0 100644
>> --- a/arch/x86/kernel/head_64.S
>> +++ b/arch/x86/kernel/head_64.S
>> @@ -38,7 +38,7 @@
>>
>>  #define pud_index(x)   (((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
>>
>> -L4_PAGE_OFFSET = pgd_index(__PAGE_OFFSET)
>> +L4_PAGE_OFFSET = pgd_index(__PAGE_OFFSET_BASE)
>>  L4_START_KERNEL = pgd_index(__START_KERNEL_map)
>>  L3_START_KERNEL = pud_index(__START_KERNEL_map)
>>
>> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
>> index c4e7b39..a261658 100644
>> --- a/arch/x86/kernel/setup.c
>> +++ b/arch/x86/kernel/setup.c
>> @@ -113,6 +113,7 @@
>>  #include <asm/prom.h>
>>  #include <asm/microcode.h>
>>  #include <asm/mmu_context.h>
>> +#include <asm/kaslr.h>
>>
>>  /*
>>   * max_low_pfn_mapped: highest direct mapped pfn under 4GB
>> @@ -942,6 +943,8 @@ void __init setup_arch(char **cmdline_p)
>>
>>         x86_init.oem.arch_setup();
>>
>> +       kernel_randomize_memory();
>> +
>>         iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
>>         setup_memory_map();
>>         parse_setup_data();
>> diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
>> index 62c0043..96d2b84 100644
>> --- a/arch/x86/mm/Makefile
>> +++ b/arch/x86/mm/Makefile
>> @@ -37,4 +37,5 @@ obj-$(CONFIG_NUMA_EMU)                += numa_emulation.o
>>
>>  obj-$(CONFIG_X86_INTEL_MPX)    += mpx.o
>>  obj-$(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) += pkeys.o
>> +obj-$(CONFIG_RANDOMIZE_MEMORY) += kaslr.o
>>
>> diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
>> index 99bfb19..4a03f60 100644
>> --- a/arch/x86/mm/dump_pagetables.c
>> +++ b/arch/x86/mm/dump_pagetables.c
>> @@ -72,9 +72,9 @@ static struct addr_marker address_markers[] = {
>>         { 0, "User Space" },
>>  #ifdef CONFIG_X86_64
>>         { 0x8000000000000000UL, "Kernel Space" },
>> -       { PAGE_OFFSET,          "Low Kernel Mapping" },
>> -       { VMALLOC_START,        "vmalloc() Area" },
>> -       { VMEMMAP_START,        "Vmemmap" },
>> +       { 0/* PAGE_OFFSET */,   "Low Kernel Mapping" },
>> +       { 0/* VMALLOC_START */, "vmalloc() Area" },
>> +       { 0/* VMEMMAP_START */, "Vmemmap" },
>>  # ifdef CONFIG_X86_ESPFIX64
>>         { ESPFIX_BASE_ADDR,     "ESPfix Area", 16 },
>>  # endif
>> @@ -434,6 +434,11 @@ void ptdump_walk_pgd_level_checkwx(void)
>>
>>  static int __init pt_dump_init(void)
>>  {
>> +#ifdef CONFIG_X86_64
>> +       address_markers[LOW_KERNEL_NR].start_address = PAGE_OFFSET;
>> +       address_markers[VMALLOC_START_NR].start_address = VMALLOC_START;
>> +       address_markers[VMEMMAP_START_NR].start_address = VMEMMAP_START;
>> +#endif
>>  #ifdef CONFIG_X86_32
>>         /* Not a compile-time constant on x86-32 */
>
> I'd move this comment above you new ifdef and generalize it to something like:
>
>     /* Various markers are not compile-time constants, so assign them here. */
>

Done for next iteration.

>>         address_markers[VMALLOC_START_NR].start_address = VMALLOC_START;
>> diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
>> index 372aad2..e490624 100644
>> --- a/arch/x86/mm/init.c
>> +++ b/arch/x86/mm/init.c
>> @@ -17,6 +17,7 @@
>>  #include <asm/proto.h>
>>  #include <asm/dma.h>           /* for MAX_DMA_PFN */
>>  #include <asm/microcode.h>
>> +#include <asm/kaslr.h>
>>
>>  /*
>>   * We need to define the tracepoints somewhere, and tlb.c
>> @@ -590,6 +591,9 @@ void __init init_mem_mapping(void)
>>         /* the ISA range is always mapped regardless of memory holes */
>>         init_memory_mapping(0, ISA_END_ADDRESS);
>>
>> +       /* Init the trampoline page table if needed for KASLR memory */
>> +       kaslr_trampoline_init();
>> +
>>         /*
>>          * If the allocation is in bottom-up direction, we setup direct mapping
>>          * in bottom-up, otherwise we setup direct mapping in top-down.
>> diff --git a/arch/x86/mm/kaslr.c b/arch/x86/mm/kaslr.c
>> new file mode 100644
>> index 0000000..3b330a9
>> --- /dev/null
>> +++ b/arch/x86/mm/kaslr.c
>> @@ -0,0 +1,136 @@
>> +#include <linux/kernel.h>
>> +#include <linux/errno.h>
>> +#include <linux/types.h>
>> +#include <linux/mm.h>
>> +#include <linux/smp.h>
>> +#include <linux/init.h>
>> +#include <linux/memory.h>
>> +#include <linux/random.h>
>> +
>> +#include <asm/processor.h>
>> +#include <asm/pgtable.h>
>> +#include <asm/pgalloc.h>
>> +#include <asm/e820.h>
>> +#include <asm/init.h>
>> +#include <asm/setup.h>
>> +#include <asm/kaslr.h>
>> +#include <asm/kasan.h>
>> +
>> +#include "mm_internal.h"
>> +
>> +/* Hold the pgd entry used on booting additional CPUs */
>> +pgd_t trampoline_pgd_entry;
>> +
>> +#define TB_SHIFT 40
>> +
>> +/*
>> + * Memory base and end randomization is based on different configurations.
>> + * We want as much space as possible to increase entropy available.
>> + */
>> +static const unsigned long memory_rand_start = __PAGE_OFFSET_BASE;
>> +
>> +#if defined(CONFIG_KASAN)
>> +static const unsigned long memory_rand_end = KASAN_SHADOW_START;
>> +#elif defined(CONFIG_X86_ESPFIX64)
>> +static const unsigned long memory_rand_end = ESPFIX_BASE_ADDR;
>> +#elif defined(CONFIG_EFI)
>> +static const unsigned long memory_rand_end = EFI_VA_START;
>> +#else
>> +static const unsigned long memory_rand_end = __START_KERNEL_map;
>> +#endif
>
> Is it worth adding BUILD_BUG_ON()s to verify these values stay in
> decreasing size?
>

Will add that for the next iteration.

>> +
>> +/* Default values */
>> +unsigned long page_offset_base = __PAGE_OFFSET_BASE;
>> +EXPORT_SYMBOL(page_offset_base);
>> +unsigned long vmalloc_base = __VMALLOC_BASE;
>> +EXPORT_SYMBOL(vmalloc_base);
>> +unsigned long vmemmap_base = __VMEMMAP_BASE;
>> +EXPORT_SYMBOL(vmemmap_base);
>> +
>> +/* Describe each randomized memory sections in sequential order */
>> +static struct kaslr_memory_region {
>> +       unsigned long *base;
>> +       unsigned short size_tb;
>> +} kaslr_regions[] = {
>> +       { &page_offset_base, 64/* Maximum */ },
>> +       { &vmalloc_base, VMALLOC_SIZE_TB },
>> +       { &vmemmap_base, 1 },
>> +};
>
> This seems to be __init_data, since it's only used in kernel_randomize_memory()?
>

Done for next iteration.

>> +
>> +/* Size in Terabytes + 1 hole */
>> +static inline unsigned long get_padding(struct kaslr_memory_region *region)
>
> I think this can be marked __init also?
>

Done for next iteration.

>> +{
>> +       return ((unsigned long)region->size_tb + 1) << TB_SHIFT;
>> +}
>> +
>> +/* Initialize base and padding for each memory section randomized with KASLR */
>> +void __init kernel_randomize_memory(void)
>> +{
>> +       size_t i;
>> +       unsigned long addr = memory_rand_start;
>> +       unsigned long padding, rand, mem_tb;
>> +       struct rnd_state rnd_st;
>> +       unsigned long remain_padding = memory_rand_end - memory_rand_start;
>> +
>> +       if (!kaslr_enabled())
>> +               return;
>> +
>> +       BUG_ON(kaslr_regions[0].base != &page_offset_base);
>
> This is statically assigned above, is this BUG_ON useful?
>
>> +       mem_tb = ((max_pfn << PAGE_SHIFT) >> TB_SHIFT);
>> +
>> +       if (mem_tb < kaslr_regions[0].size_tb)
>> +               kaslr_regions[0].size_tb = mem_tb;
>
> Can you add a comment for this? IIUC, this is just recalculating the
> max memory size available for padding based on the page shift? Under
> what situations would this be changing?
>

It ensures the maximum memory taken for physical mapping is 64TB. To
be sure it can
work with the other sections.

>> +
>> +       for (i = 0; i < ARRAY_SIZE(kaslr_regions); i++)
>> +               remain_padding -= get_padding(&kaslr_regions[i]);
>> +
>> +       prandom_seed_state(&rnd_st, kaslr_get_random_boot_long());
>> +
>> +       /* Position each section randomly with minimum 1 terabyte between */
>> +       for (i = 0; i < ARRAY_SIZE(kaslr_regions); i++) {
>> +               padding = remain_padding / (ARRAY_SIZE(kaslr_regions) - i);
>> +               prandom_bytes_state(&rnd_st, &rand, sizeof(rand));
>> +               padding = (rand % (padding + 1)) & PUD_MASK;
>> +               addr += padding;
>> +               *kaslr_regions[i].base = addr;
>> +               addr += get_padding(&kaslr_regions[i]);
>> +               remain_padding -= padding;
>> +       }
>
> What happens if we run out of padding here, and doesn't this loop mean
> earlier regions will have, on average, more padding? Should each
> instead randomize within a one-time calculation of remaining_padding /
> ARRAY_SIZE(kaslr_regions) ?
>

Yes, padding is more likely to be bigger on first section. If we make
it standard across
sections it means that guessing the base of one give you all the other
sections. That's
why it is separate.

> Also, to get added to the Kconfig, what is the available entropy here?
> How far can each of the base addresses get offset?
>

Yes, it depends of the configuration of course but each memory section
has about 30,000
memory possible virtual addresses in average (best case scenario). I
will edit the Kconfig.

>> +}
>> +
>> +/*
>> + * Create PGD aligned trampoline table to allow real mode initialization
>> + * of additional CPUs. Consume only 1 additonal low memory page.
>
> Typo "additional".
>

Fixed for next iteration.

>> + */
>> +void __meminit kaslr_trampoline_init(void)
>> +{
>> +       unsigned long addr, next;
>> +       pgd_t *pgd;
>> +       pud_t *pud_page, *tr_pud_page;
>> +       int i;
>> +
>> +       /* If KASLR is disabled, default to the existing page table entry */
>> +       if (!kaslr_enabled()) {
>> +               trampoline_pgd_entry = init_level4_pgt[pgd_index(PAGE_OFFSET)];
>> +               return;
>> +       }
>> +
>> +       tr_pud_page = alloc_low_page();
>> +       set_pgd(&trampoline_pgd_entry, __pgd(_PAGE_TABLE | __pa(tr_pud_page)));
>> +
>> +       addr = 0;
>> +       pgd = pgd_offset_k((unsigned long)__va(addr));
>> +       pud_page = (pud_t *) pgd_page_vaddr(*pgd);
>> +
>> +       for (i = pud_index(addr); i < PTRS_PER_PUD; i++, addr = next) {
>> +               pud_t *pud, *tr_pud;
>> +
>> +               tr_pud = tr_pud_page + pud_index(addr);
>> +               pud = pud_page + pud_index((unsigned long)__va(addr));
>> +               next = (addr & PUD_MASK) + PUD_SIZE;
>> +
>> +               /* Needed to copy pte or pud alike */
>> +               BUILD_BUG_ON(sizeof(pud_t) != sizeof(pte_t));
>> +               *tr_pud = *pud;
>> +       }
>> +}
>> diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
>> index 0b7a63d..6518314 100644
>> --- a/arch/x86/realmode/init.c
>> +++ b/arch/x86/realmode/init.c
>> @@ -84,7 +84,11 @@ void __init setup_real_mode(void)
>>         *trampoline_cr4_features = __read_cr4();
>>
>>         trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd);
>> +#ifdef CONFIG_RANDOMIZE_MEMORY
>> +       trampoline_pgd[0] = trampoline_pgd_entry.pgd;
>> +#else
>>         trampoline_pgd[0] = init_level4_pgt[pgd_index(__PAGE_OFFSET)].pgd;
>> +#endif
>
> To avoid this ifdefs, could trampoline_pgd_entry instead be defined
> outside of mm/kaslr.c and have .pgd assigned as
> init_level4_pgt[pgd_index(__PAGE_OFFSET)].pgd via a static inline of
> kaslr_trampoline_init() instead?
>

Yes, I will change that.

>>         trampoline_pgd[511] = init_level4_pgt[511].pgd;
>>  #endif
>>  }
>> --
>> 2.8.0.rc3.226.g39d4020
>>
>
> -Kees
>
> --
> Kees Cook
> Chrome OS & Brillo Security
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux