[PATCH v5 12/24] backlight: lm3630a: explicitly apply PWM config extracted from pwm_args

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Call pwm_apply_args() just after requesting the PWM device so that the
polarity and period are initialized according to the information provided
in pwm_args.

This is an intermediate state, and pwm_apply_args() should be dropped as
soon as the atomic PWM infrastructure is in place and the driver makes
use of it.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
---
 drivers/video/backlight/lm3630a_bl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 3d16bd6..60d6c2a 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -424,6 +424,12 @@ static int lm3630a_probe(struct i2c_client *client,
 			dev_err(&client->dev, "fail : get pwm device\n");
 			return PTR_ERR(pchip->pwmd);
 		}
+
+		/*
+		 * FIXME: pwm_apply_args() should be removed when switching to
+		 * the atomic PWM API.
+		 */
+		pwm_apply_args(pchip->pwmd);
 	}
 
 	/* interrupt enable  : irq 0 is not allowed */
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux