From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
In preparation for additional memory module ECCs, add the
memory initialization functions.
Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/edac/altera_edac.c | 152 ++++++++++++++++++++++++++++++++++++++++++++
drivers/edac/altera_edac.h | 3 +
2 files changed, 155 insertions(+)
diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 226e650..0955ab0 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -19,6 +19,7 @@
#include <asm/cacheflush.h>
#include <linux/ctype.h>
+#include <linux/delay.h>
#include <linux/edac.h>
#include <linux/genalloc.h>
#include <linux/interrupt.h>
@@ -851,6 +852,8 @@ module_platform_driver(altr_edac_device_driver);
/********************* Arria10 Function Declarations *********************/
static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
bool sberr);
+static int altr_init_a10_ecc_block(const char *compat, u32 irq_mask,
+ u32 ecc_ctrl_en_mask, bool dual_port);
/*********************** OCRAM EDAC Device Functions *********************/
@@ -1039,6 +1042,155 @@ const struct edac_device_prv_data a10_l2ecc_data = {
* Based on xgene_edac.c peripheral code.
*/
+static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ value |= bit_mask;
+ writel(value, ioaddr);
+}
+
+static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ value &= ~bit_mask;
+ writel(value, ioaddr);
+}
+
+static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+ int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+ u32 init_mask = ALTR_A10_ECC_INITA;
+ u32 stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+ u32 clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+ int ret = 0;
+
+ if (port) {
+ init_mask = ALTR_A10_ECC_INITB;
+ stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+ clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+ }
+
+ ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+ while (limit--) {
+ if (ecc_test_bits(stat_mask,
+ (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+ break;
+ udelay(1);
+ }
+ if (limit < 0)
+ ret = -EBUSY;
+
+ /* Clear any pending ECC interrupts */
+ writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+ return ret;
+}
+
+/*
+ * Aside from the L2 ECC, the Arria10 ECC memories have a common register
+ * layout so the following functions can be shared between all peripherals.
+ */
+static int altr_init_a10_ecc_block(const char *compat, u32 irq_mask,
+ u32 ecc_ctrl_en_mask, bool dual_port)
+{
+ int ret = 0;
+ void __iomem *ecc_block_base;
+ struct regmap *ecc_mgr_map;
+ char *ecc_name;
+ struct device_node *np, *parent, *np_eccmgr;
+
+ np = of_find_compatible_node(NULL, NULL, compat);
+ if (!np) {
+ pr_err("SOCFPGA: Unable to find %s in dtb\n", compat);
+ ret = -ENODEV;
+ goto out;
+ }
+ ecc_name = (char *)np->name;
+
+ /* Ensure device is enabled before calling init, otherwise exit */
+ parent = of_parse_phandle(np, "parent", 0);
+ if (!parent || !of_device_is_available(parent)) {
+ ret = -ENODEV;
+ goto out1;
+ }
+
+ /* Get the ECC Manager - parent of the device EDACs */
+ np_eccmgr = of_get_parent(np);
+ ecc_mgr_map = syscon_regmap_lookup_by_phandle(np_eccmgr,
+ "altr,sysmgr-syscon");
+ of_node_put(np_eccmgr);
+ if (IS_ERR(ecc_mgr_map)) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "Unable to get syscon altr,sysmgr-syscon\n");
+ ret = -ENODEV;
+ goto out1;
+ }
+
+ /* Map the ECC Block */
+ ecc_block_base = of_iomap(np, 0);
+ if (!ecc_block_base) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "Unable to map %s ECC block\n", ecc_name);
+ ret = -ENODEV;
+ goto out1;
+ }
+
+ /* Disable ECC */
+ regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
+ ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
+ (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+ ecc_clear_bits(ecc_ctrl_en_mask,
+ (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+ /* Ensure all writes complete */
+ wmb();
+ /* Use HW initialization block to initialize memory for ECC */
+ ret = altr_init_memory_port(ecc_block_base, 0);
+ if (ret) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "ECC: cannot init %s PORTA memory\n", ecc_name);
+ goto out2;
+ }
+
+ if (dual_port) {
+ ret = altr_init_memory_port(ecc_block_base, 1);
+ if (ret) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "ECC: cannot init %s PORTB memory\n",
+ ecc_name);
+ goto out2;
+ }
+ }
+
+ /* Enable ECC */
+ ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
+ ALTR_A10_ECC_CTRL_OFST));
+ ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
+ (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+ regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
+ /* Ensure all writes complete */
+ wmb();
+out2:
+ iounmap(ecc_block_base);
+out1:
+ of_node_put(parent);
+out:
+ of_node_put(np);
+ return ret;
+}
+
static ssize_t altr_edac_a10_device_trig(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index 42090f3..7e66015 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -280,6 +280,9 @@ struct altr_sdram_mc_data {
/* Arria 10 OCRAM ECC Management Group Defines */
#define ALTR_A10_OCRAM_ECC_EN_CTL (BIT(1) | BIT(0))
+/* A10 ECC Controller memory initialization timeout */
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US 10000
+
struct altr_edac_device_dev;
struct edac_device_prv_data {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
