RE: [PATCH] Syntactic and factual errors in the API document

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>> Not sure about this one.  It's good that it uses the same language as set_cur_state.  What's the problem with "Current throttle state"?

It's a cooling device, typically a fan. If I set it to 5000RPM, but it's stuck and not going round at all, the API only allows me to ask what I set it to not what it has currently achieved. That's not obvious from the description as it was. Some fans have tachometer feedback, but this API won't give you that data.

The alteration is intended to make it clear that what you get back only tells you what you asked for, not what you actually got. 

Regards
Andy

-----Original Message-----
From: Javi Merino [mailto:javi.merino@xxxxxxx] 
Sent: 22 March 2016 14:36
To: Champ, Andy <andycham@xxxxxxxxxxxx>
Cc: edubezval@xxxxxxxxx; corbet@xxxxxxx; durgadoss.r@xxxxxxxxx; leo.yan@xxxxxxxxxx; kapileshwar.singh@xxxxxxx; wni@xxxxxxxxxx; linux-doc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: [PATCH] Syntactic and factual errors in the API document

Hi Andy,

Thanks for improving the documentation!  One minor nit below.  Other than that, you can add my reviewed-by.

On Tue, Mar 22, 2016 at 12:37:25PM +0000, Andy Champ wrote:
> There are several places where the English in the document is 
> syntactically invalid, or unclear. There are also one or two factual errors.
> 
> ---
>  Documentation/thermal/sysfs-api.txt | 44 
> ++++++++++++++++++-------------------
>  1 file changed, 22 insertions(+), 22 deletions(-)
> 
> diff --git a/Documentation/thermal/sysfs-api.txt 
> b/Documentation/thermal/sysfs-api.txt
> index 8c745c8..5bc73ef 100644
> --- a/Documentation/thermal/sysfs-api.txt
> +++ b/Documentation/thermal/sysfs-api.txt
> @@ -69,8 +69,8 @@ temperature) and throttle appropriate devices.
>  1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device 
> *tz)
>  
>      This interface function removes the thermal zone device.
> -    It deletes the corresponding entry form /sys/class/thermal folder and
> -    unbind all the thermal cooling devices it uses.
> +    It deletes the corresponding entry from /sys/class/thermal folder and
> +    unbinds all the thermal cooling devices it uses.
>  
>  1.2 thermal cooling device interface
>  1.2.1 struct thermal_cooling_device 
> *thermal_cooling_device_register(char *name, @@ -78,32 +78,32 @@ temperature) and throttle appropriate devices.
>  
>      This interface function adds a new thermal cooling device (fan/processor/...)
>      to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
> -    to all the thermal zone devices register at the same time.
> +    to all the thermal zone devices registered at the same time.
>      name: the cooling device name.
>      devdata: device private data.
>      ops: thermal cooling devices call-backs.
>  	.get_max_state: get the Maximum throttle state of the cooling device.
> -	.get_cur_state: get the Current throttle state of the cooling device.
> +	.get_cur_state: get the Currently requested throttle state of the cooling device.

Not sure about this one.  It's good that it uses the same language as set_cur_state.  What's the problem with "Current throttle state"?

>  	.set_cur_state: set the Current throttle state of the cooling device.
>  
>  1.2.2 void thermal_cooling_device_unregister(struct 
> thermal_cooling_device *cdev)
>  
> -    This interface function remove the thermal cooling device.
> -    It deletes the corresponding entry form /sys/class/thermal folder and
> -    unbind itself from all the thermal zone devices using it.
> +    This interface function removes the thermal cooling device.
> +    It deletes the corresponding entry from /sys/class/thermal folder and
> +    unbinds itself from all the thermal zone devices using it.
>  
>  1.3 interface for binding a thermal zone device with a thermal 
> cooling device
>  1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
>  	int trip, struct thermal_cooling_device *cdev,
>  	unsigned long upper, unsigned long lower, unsigned int weight);
>  
> -    This interface function bind a thermal cooling device to the certain trip
> +    This interface function binds a thermal cooling device to a 
> + particular trip
>      point of a thermal zone device.
>      This function is usually called in the thermal zone device .bind callback.
>      tz: the thermal zone device
>      cdev: thermal cooling device
> -    trip: indicates which trip point the cooling devices is associated with
> -	  in this thermal zone.
> +    trip: indicates which trip point in this thermal zone the cooling device
> +          is associated with.
>      upper:the Maximum cooling state for this trip point.
>            THERMAL_NO_LIMIT means no upper limit,
>  	  and the cooling device can be in max_state.
> @@ -116,13 +116,13 @@ temperature) and throttle appropriate devices.
>  1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
>  		int trip, struct thermal_cooling_device *cdev);
>  
> -    This interface function unbind a thermal cooling device from the certain
> +    This interface function unbinds a thermal cooling device from a 
> + particular
>      trip point of a thermal zone device. This function is usually called in
>      the thermal zone device .unbind callback.
>      tz: the thermal zone device
>      cdev: thermal cooling device
> -    trip: indicates which trip point the cooling devices is associated with
> -	  in this thermal zone.
> +    trip: indicates which trip point in this thermal zone the cooling device
> +          is associated with.
>  
>  1.4 Thermal Zone Parameters
>  1.4.1 struct thermal_bind_params
> @@ -142,13 +142,13 @@ temperature) and throttle appropriate devices.
>                 this thermal zone and cdev, for a particular trip point.
>                 If nth bit is set, then the cdev and thermal zone are bound
>                 for trip point n.
> -    .limits: This is an array of cooling state limits. Must have exactly
> -         2 * thermal_zone.number_of_trip_points. It is an array consisting
> -         of tuples <lower-state upper-state> of state limits. Each trip
> -         will be associated with one state limit tuple when binding.
> -         A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS>
> -         on all trips. These limits are used when binding a cdev to a
> -         trip point.
> +    .binding_limits: This is an array of cooling state limits. Must have
> +                     exactly 2 * thermal_zone.number_of_trip_points. It is an
> +                     array consisting of tuples <lower-state upper-state> of
> +                     state limits. Each trip will be associated with one state
> +                     limit tuple when binding. A NULL pointer means
> +                     <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips.
> +                     These limits are used when binding a cdev to a trip point.
>      .match: This call back returns success(0) if the 'tz and cdev' need to
>  	    be bound, as per platform data.
>  1.4.2 struct thermal_zone_params
> @@ -283,8 +283,8 @@ cdev[0-*]
>  	RO, Optional
>  
>  cdev[0-*]_trip_point
> -	The trip point with which cdev[0-*] is associated in this thermal
> -	zone; -1 means the cooling device is not associated with any trip
> +	The trip point in this thermal zone which cdev[0-*] is associated
> +	with; -1 means the cooling device is not associated with any trip
>  	point.
>  	RO, Optional
>  

��.n��������+%������w��{.n�����{����*jg��������ݢj����G�������j:+v���w�m������w�������h�����٥




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux