Re: [PATCH v6 05/11] drm/hisilicon: Add vblank driver for ADE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/26/2016 2:10 PM, Xinliang Liu wrote:
Add vblank irq handle.

v6: None.
v5: None.
v4: None.
v3:
- Remove hisi_get_crtc_from_index func.
- A few cleanup.
v2:
- Remove abtraction layer.

Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx>
---
  drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 62 +++++++++++++++++++++++++
  drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 14 +++++-
  2 files changed, 75 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
index aa2cf75cab39..749382952ab7 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
@@ -292,6 +292,59 @@ static void ade_set_medianoc_qos(struct ade_crtc *acrtc)
  			   SOCKET_QOS_EN, SOCKET_QOS_EN);
  }

+static int ade_enable_vblank(struct drm_device *dev, unsigned int pipe)
+{
+	struct kirin_drm_private *priv = dev->dev_private;
+	struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);
+	struct ade_hw_ctx *ctx = acrtc->ctx;
+	void __iomem *base = ctx->base;
+
+	if (!ctx->power_on)
+		(void)ade_power_up(ctx);
+
+	ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,
+			MASK(1), 1);
+
+	return 0;
+}
+
+static void ade_disable_vblank(struct drm_device *dev, unsigned int pipe)
+{
+	struct kirin_drm_private *priv = dev->dev_private;
+	struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);
+	struct ade_hw_ctx *ctx = acrtc->ctx;
+	void __iomem *base = ctx->base;
+
+	if (!ctx->power_on) {
+		DRM_ERROR("power is down! vblank disable fail\n");
+		return;
+	}
+
+	ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,
+			MASK(1), 0);
+}
+
+static irqreturn_t ade_irq_handler(int irq, void *data)
+{
+	struct ade_crtc *acrtc = data;
+	struct ade_hw_ctx *ctx = acrtc->ctx;
+	struct drm_crtc *crtc = &acrtc->base;
+	void __iomem *base = ctx->base;
+	u32 status;
+
+	status = readl(base + LDI_MSK_INT);
+	DRM_DEBUG_VBL("LDI IRQ: status=0x%X\n", status);
+
+	/* vblank irq */
+	if (status & BIT(FRAME_END_INT_EN_OFST)) {
+		ade_update_bits(base + LDI_INT_CLR, FRAME_END_INT_EN_OFST,
+				MASK(1), 1);
+		drm_crtc_handle_vblank(crtc);
+	}
+
+	return IRQ_HANDLED;
+}
+
  static void ade_display_enable(struct ade_crtc *acrtc)
  {
  	struct ade_hw_ctx *ctx = acrtc->ctx;
@@ -967,6 +1020,15 @@ int ade_drm_init(struct drm_device *dev)
  	if (ret)
  		return ret;

+	/* vblank irq init */
+	ret = devm_request_irq(dev->dev, ctx->irq, ade_irq_handler,
+			       DRIVER_IRQ_SHARED, dev->driver->name, acrtc);

This isn't the way we set up interrupts for kms drivers. We need to
provide the handler in drm_driver and call drm_irq_install.

+	if (ret)
+		return ret;
+	dev->driver->get_vblank_counter = drm_vblank_no_hw_counter;
+	dev->driver->enable_vblank = ade_enable_vblank;
+	dev->driver->disable_vblank = ade_disable_vblank;
+
  	return 0;
  }

diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
index 055729c1889c..723888feb760 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
@@ -32,6 +32,7 @@ static int kirin_drm_kms_cleanup(struct drm_device *dev)
  {
  	struct kirin_drm_private *priv = dev->dev_private;

+	drm_vblank_cleanup(dev);
  	dc_ops->cleanup(dev);
  	drm_mode_config_cleanup(dev);
  	devm_kfree(dev->dev, priv);
@@ -85,11 +86,22 @@ static int kirin_drm_kms_init(struct drm_device *dev)
  		goto err_dc_cleanup;
  	}

+	/* vblank init */
+	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+	if (ret) {
+		DRM_ERROR("failed to initialize vblank.\n");
+		goto err_unbind_all;
+	}
+	/* with irq_enabled = true, we can use the vblank feature. */
+	dev->irq_enabled = true;
+
  	/* reset all the states of crtc/plane/encoder/connector */
  	drm_mode_config_reset(dev);

  	return 0;

+err_unbind_all:
+	component_unbind_all(dev->dev, dev);
  err_dc_cleanup:
  	dc_ops->cleanup(dev);
  err_mode_config_cleanup:
@@ -123,7 +135,7 @@ static int kirin_gem_cma_dumb_create(struct drm_file *file,

  static struct drm_driver kirin_drm_driver = {
  	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
-				  DRIVER_ATOMIC,
+				  DRIVER_ATOMIC | DRIVER_HAVE_IRQ,

DRIVER_IRQ_SHARED should be added here if you want IRQF_SHARED flag set
when requesting the handler.

Archit

  	.fops			= &kirin_drm_fops,
  	.set_busid		= drm_platform_set_busid,



--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux