On 8 February 2016 at 18:59, Archit Taneja <architt@xxxxxxxxxxxxxx> wrote:
>
>
> On 02/06/2016 08:54 AM, Xinliang Liu wrote:
>>
>> Add crtc funcs and helper funcs for ADE.
>>
>> v4: None.
>> v3:
>> - Make ade as the master driver.
>> - Use port to connect with encoder.
>> - A few cleanup.
>> v2:
>> - Remove abtraction layer.
>>
>> Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx>
>> ---
>> drivers/gpu/drm/hisilicon/kirin/Makefile | 3 +-
>> drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h | 280 +++++++++++++++
>> drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 458
>> ++++++++++++++++++++++++
>> drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 15 +
>> drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.h | 8 +
>> 5 files changed, 763 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h
>> create mode 100644 drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
>>
>> diff --git a/drivers/gpu/drm/hisilicon/kirin/Makefile
>> b/drivers/gpu/drm/hisilicon/kirin/Makefile
>> index cb346de47d48..2a61ab006ddb 100644
>> --- a/drivers/gpu/drm/hisilicon/kirin/Makefile
>> +++ b/drivers/gpu/drm/hisilicon/kirin/Makefile
>> @@ -1,3 +1,4 @@
>> -kirin-drm-y := kirin_drm_drv.o
>> +kirin-drm-y := kirin_drm_drv.o \
>> + kirin_drm_ade.o
>>
>> obj-$(CONFIG_DRM_HISI_KIRIN) += kirin-drm.o
>> diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h
>> b/drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h
>> new file mode 100644
>> index 000000000000..78020747abfe
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h
>> @@ -0,0 +1,280 @@
>> +/*
>> + * Copyright (c) 2016 Linaro Limited.
>> + * Copyright (c) 2014-2016 Hisilicon Limited.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#ifndef __KIRIN_ADE_REG_H__
>> +#define __KIRIN_ADE_REG_H__
>> +
>> +/*
>> + * ADE Registers
>> + */
>> +#define MASK(x) (BIT(x) - 1)
>> +
>> +#define ADE_CTRL 0x0004
>> +#define FRM_END_START_OFST 0
>> +#define FRM_END_START_MASK MASK(2)
>> +#define ADE_CTRL1 0x008C
>> +#define AUTO_CLK_GATE_EN_OFST 0
>> +#define AUTO_CLK_GATE_EN BIT(0)
>> +#define ADE_ROT_SRC_CFG 0x0010
>> +#define ADE_DISP_SRC_CFG 0x0018
>> +#define ADE_WDMA2_SRC_CFG 0x001C
>> +#define ADE_SEC_OVLY_SRC_CFG 0x0020
>> +#define ADE_WDMA3_SRC_CFG 0x0024
>> +#define ADE_OVLY1_TRANS_CFG 0x002C
>> +#define ADE_EN 0x0100
>> +#define ADE_DISABLE 0
>> +#define ADE_ENABLE 1
>> +#define INTR_MASK_CPU(x) (0x0C10 + (x) * 0x4)
>> +#define ADE_FRM_DISGARD_CTRL 0x00A4
>> +/* reset and reload regs */
>> +#define ADE_SOFT_RST_SEL(x) (0x0078 + (x) * 0x4)
>> +#define ADE_RELOAD_DIS(x) (0x00AC + (x) * 0x4)
>> +#define RDMA_OFST 0
>> +#define CLIP_OFST 15
>> +#define SCL_OFST 21
>> +#define CTRAN_OFST 24
>> +#define OVLY_OFST 37 /* 32+5 */
>> +/* channel regs */
>> +#define RD_CH_PE(x) (0x1000 + (x) * 0x80)
>> +#define RD_CH_CTRL(x) (0x1004 + (x) * 0x80)
>> +#define RD_CH_ADDR(x) (0x1008 + (x) * 0x80)
>> +#define RD_CH_SIZE(x) (0x100C + (x) * 0x80)
>> +#define RD_CH_STRIDE(x) (0x1010 + (x) * 0x80)
>> +#define RD_CH_SPACE(x) (0x1014 + (x) * 0x80)
>> +#define RD_CH_PARTIAL_SIZE(x) (0x1018 + (x) * 0x80)
>> +#define RD_CH_PARTIAL_SPACE(x) (0x101C + (x) * 0x80)
>> +#define RD_CH_EN(x) (0x1020 + (x) * 0x80)
>> +#define RD_CH_STATUS(x) (0x1024 + (x) * 0x80)
>> +#define RD_CH_DISP_CTRL 0x1404
>> +#define RD_CH_DISP_ADDR 0x1408
>> +#define RD_CH_DISP_SIZE 0x140C
>> +#define RD_CH_DISP_STRIDE 0x1410
>> +#define RD_CH_DISP_SPACE 0x1414
>> +#define RD_CH_DISP_EN 0x142C
>> +/* clip regs */
>> +#define ADE_CLIP_DISABLE(x) (0x6800 + (x) * 0x100)
>> +#define ADE_CLIP_SIZE0(x) (0x6804 + (x) * 0x100)
>> +#define ADE_CLIP_SIZE1(x) (0x6808 + (x) * 0x100)
>> +#define ADE_CLIP_SIZE2(x) (0x680C + (x) * 0x100)
>> +#define ADE_CLIP_CFG_OK(x) (0x6810 + (x) * 0x100)
>> +/* scale regs */
>> +#define ADE_SCL1_MUX_CFG 0x000C
>> +#define ADE_SCL2_SRC_CFG 0x0014
>> +#define ADE_SCL3_MUX_CFG 0x0008
>> +#define ADE_SCL_CTRL(x) (0x3000 + (x) * 0x800)
>> +#define ADE_SCL_HSP(x) (0x3004 + (x) * 0x800)
>> +#define ADE_SCL_UV_HSP(x) (0x3008 + (x) * 0x800)
>> +#define ADE_SCL_VSP(x) (0x300C + (x) * 0x800)
>> +#define ADE_SCL_UV_VSP(x) (0x3010 + (x) * 0x800)
>> +#define ADE_SCL_ORES(x) (0x3014 + (x) * 0x800)
>> +#define ADE_SCL_IRES(x) (0x3018 + (x) * 0x800)
>> +#define ADE_SCL_START(x) (0x301C + (x) * 0x800)
>> +#define ADE_SCL_ERR(x) (0x3020 + (x) * 0x800)
>> +#define ADE_SCL_PIX_OFST(x) (0x3024 + (x) * 0x800)
>> +#define ADE_SCL_UV_PIX_OFST(x) (0x3028 + (x) * 0x800)
>> +#define ADE_SCL_COEF_CLR(x) (0x3030 + (x) * 0x800)
>> +#define ADE_SCL_HCOEF(x, m, n) (0x3100 + (x) * 0x800 + \
>> + 12 * (m) + 4 * (n))
>> +#define ADE_SCL_VCOEF(x, i, j) (0x340C + (x) * 0x800 + \
>> + 12 * (i) + 4 * (j))
>> +/* ctran regs */
>> +#define ADE_CTRAN5_TRANS_CFG 0x0040
>> +#define ADE_CTRAN_DIS(x) (0x5004 + (x) * 0x100)
>> +#define CTRAN_BYPASS_ON 1
>> +#define CTRAN_BYPASS_OFF 0
>> +#define ADE_CTRAN_MODE_CHOOSE(x) (0x5008 + (x) * 0x100)
>> +#define ADE_CTRAN_STAT(x) (0x500C + (x) * 0x100)
>> +#define ADE_CTRAN_CHDC0(x) (0x5010 + (x) * 0x100)
>> +#define ADE_CTRAN_CHDC1(x) (0x5014 + (x) * 0x100)
>> +#define ADE_CTRAN_CHDC2(x) (0x5018 + (x) * 0x100)
>> +#define ADE_CTRAN_CHDC3(x) (0x501C + (x) * 0x100)
>> +#define ADE_CTRAN_CHDC4(x) (0x5020 + (x) * 0x100)
>> +#define ADE_CTRAN_CHDC5(x) (0x5024 + (x) * 0x100)
>> +#define ADE_CTRAN_CSC0(x) (0x5028 + (x) * 0x100)
>> +#define ADE_CTRAN_CSC1(x) (0x502C + (x) * 0x100)
>> +#define ADE_CTRAN_CSC2(x) (0x5030 + (x) * 0x100)
>> +#define ADE_CTRAN_CSC3(x) (0x5034 + (x) * 0x100)
>> +#define ADE_CTRAN_CSC4(x) (0x5038 + (x) * 0x100)
>> +#define ADE_CTRAN_IMAGE_SIZE(x) (0x503C + (x) * 0x100)
>> +#define ADE_CTRAN_CFG_OK(x) (0x5040 + (x) * 0x100)
>> +/* overlay regs */
>> +#define ADE_OVLY_ALPHA_ST 0x2000
>> +#define ADE_OVLY_CH_XY0(x) (0x2004 + (x) * 4)
>> +#define ADE_OVLY_CH_XY1(x) (0x2024 + (x) * 4)
>> +#define ADE_OVLY_CH_CTL(x) (0x204C + (x) * 4)
>> +#define ADE_OVLY_OUTPUT_SIZE(x) (0x2070 + (x) * 8)
>> +#define OUTPUT_XSIZE_OFST 16
>> +#define ADE_OVLY_BASE_COLOR(x) (0x2074 + (x) * 8)
>> +#define ADE_OVLYX_CTL(x) (0x209C + (x) * 4)
>> +#define ADE_OVLY_CTL 0x0098
>> +#define CH_OVLY_SEL_OFST(x) ((x) * 4)
>> +#define CH_OVLY_SEL_MASK MASK(2)
>> +#define CH_OVLY_SEL_VAL(x) ((x) + 1)
>> +#define CH_ALP_MODE_OFST 0
>> +#define CH_ALP_SEL_OFST 2
>> +#define CH_UNDER_ALP_SEL_OFST 4
>> +#define CH_EN_OFST 6
>> +#define CH_ALP_GBL_OFST 15
>> +#define CH_SEL_OFST 28
>> +
>> +/*
>> + * LDI Registers
>> + */
>> +#define LDI_HRZ_CTRL0 0x7400
>> +#define HBP_OFST 20
>> +#define LDI_HRZ_CTRL1 0x7404
>> +#define LDI_VRT_CTRL0 0x7408
>> +#define VBP_OFST 20
>> +#define LDI_VRT_CTRL1 0x740C
>> +#define LDI_PLR_CTRL 0x7410
>> +#define FLAG_NVSYNC BIT(0)
>> +#define FLAG_NHSYNC BIT(1)
>> +#define FLAG_NPIXCLK BIT(2)
>> +#define FLAG_NDE BIT(3)
>> +#define LDI_DSP_SIZE 0x7414
>> +#define VSIZE_OFST 20
>> +#define LDI_INT_EN 0x741C
>> +#define FRAME_END_INT_EN_OFST 1
>> +#define LDI_CTRL 0x7420
>> +#define BPP_OFST 3
>> +#define DATA_GATE_EN BIT(2)
>> +#define LDI_EN BIT(0)
>> +#define LDI_ORG_INT 0x7424
>> +#define LDI_MSK_INT 0x7428
>> +#define LDI_INT_CLR 0x742C
>> +#define LDI_WORK_MODE 0x7430
>> +#define LDI_DE_SPACE_LOW 0x7438
>> +#define LDI_MCU_INTS 0x7450
>> +#define LDI_MCU_INTE 0x7454
>> +#define LDI_MCU_INTC 0x7458
>> +#define LDI_HDMI_DSI_GT 0x7434
>> +
>> +/*
>> + * media regs
>> + */
>> +#define SC_MEDIA_RSTDIS 0x0530
>> +#define SC_MEDIA_RSTEN 0x052C
>> +#define NOC_ADE0_QOSGENERATOR_MODE 0x010C
>> +#define NOC_ADE0_QOSGENERATOR_EXTCONTROL 0x0118
>> +#define NOC_ADE1_QOSGENERATOR_MODE 0x020C
>> +#define NOC_ADE1_QOSGENERATOR_EXTCONTROL 0x0218
>> +
>> +/*
>> + * ADE regs relevant enums
>> + */
>> +enum frame_end_start {
>> + /* regs take effective in every vsync */
>> + REG_EFFECTIVE_IN_VSYNC = 0,
>> + /* regs take effective in fist ade en and every frame end */
>> + REG_EFFECTIVE_IN_ADEEN_FRMEND,
>> + /* regs take effective in ade en immediately */
>> + REG_EFFECTIVE_IN_ADEEN,
>> + /* regs take effective in first vsync and every frame end */
>> + REG_EFFECTIVE_IN_VSYNC_FRMEND
>> +};
>> +
>> +enum ade_fb_format {
>> + ADE_RGB_565 = 0,
>> + ADE_BGR_565,
>> + ADE_XRGB_8888,
>> + ADE_XBGR_8888,
>> + ADE_ARGB_8888,
>> + ADE_ABGR_8888,
>> + ADE_RGBA_8888,
>> + ADE_BGRA_8888,
>> + ADE_RGB_888,
>> + ADE_BGR_888 = 9,
>> + ADE_FORMAT_NOT_SUPPORT = 800
>> +};
>> +
>> +enum ade_channel {
>> + ADE_CH1 = 0, /* channel 1 for primary plane */
>> + ADE_CH_NUM
>> +};
>> +
>> +enum ade_scale {
>> + ADE_SCL1 = 0,
>> + ADE_SCL2,
>> + ADE_SCL3,
>> + ADE_SCL_NUM
>> +};
>> +
>> +enum ade_ctran {
>> + ADE_CTRAN1 = 0,
>> + ADE_CTRAN2,
>> + ADE_CTRAN3,
>> + ADE_CTRAN4,
>> + ADE_CTRAN5,
>> + ADE_CTRAN6,
>> + ADE_CTRAN_NUM
>> +};
>> +
>> +enum ade_overlay {
>> + ADE_OVLY1 = 0,
>> + ADE_OVLY2,
>> + ADE_OVLY3,
>> + ADE_OVLY_NUM
>> +};
>> +
>> +enum ade_alpha_mode {
>> + ADE_ALP_GLOBAL = 0,
>> + ADE_ALP_PIXEL,
>> + ADE_ALP_PIXEL_AND_GLB
>> +};
>> +
>> +enum ade_alpha_blending_mode {
>> + ADE_ALP_MUL_COEFF_0 = 0, /* alpha */
>> + ADE_ALP_MUL_COEFF_1, /* 1-alpha */
>> + ADE_ALP_MUL_COEFF_2, /* 0 */
>> + ADE_ALP_MUL_COEFF_3 /* 1 */
>> +};
>> +
>> +/*
>> + * LDI regs relevant enums
>> + */
>> +enum dsi_pclk_en {
>> + DSI_PCLK_ON = 0,
>> + DSI_PCLK_OFF
>> +};
>> +
>> +enum ldi_output_format {
>> + LDI_OUT_RGB_565 = 0,
>> + LDI_OUT_RGB_666,
>> + LDI_OUT_RGB_888
>> +};
>> +
>> +enum ldi_work_mode {
>> + TEST_MODE = 0,
>> + NORMAL_MODE
>> +};
>> +
>> +enum ldi_input_source {
>> + DISP_SRC_NONE = 0,
>> + DISP_SRC_OVLY2,
>> + DISP_SRC_DISP,
>> + DISP_SRC_ROT,
>> + DISP_SRC_SCL2
>> +};
>> +
>> +/*
>> + * Register Write/Read Helper functions
>> + */
>> +static inline void ade_update_bits(void __iomem *addr, u32 bit_start,
>> + u32 mask, u32 val)
>> +{
>> + u32 tmp, orig;
>> +
>> + orig = readl(addr);
>> + tmp = orig & ~(mask << bit_start);
>> + tmp |= (val & mask) << bit_start;
>> + writel(tmp, addr);
>> +}
>> +
>> +#endif
>> diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
>> b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
>> new file mode 100644
>> index 000000000000..b45149616716
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
>> @@ -0,0 +1,458 @@
>> +/*
>> + * Hisilicon Hi6220 SoC ADE(Advanced Display Engine)'s crtc&plane driver
>> + *
>> + * Copyright (c) 2016 Linaro Limited.
>> + * Copyright (c) 2014-2016 Hisilicon Limited.
>> + *
>> + * Author:
>> + * Xinliang Liu <z.liuxinliang@xxxxxxxxxxxxx>
>> + * Xinliang Liu <xinliang.liu@xxxxxxxxxx>
>> + * Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <linux/bitops.h>
>> +#include <linux/clk.h>
>> +#include <video/display_timing.h>
>> +
>> +#include <drm/drmP.h>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_atomic.h>
>> +#include <drm/drm_atomic_helper.h>
>> +
>> +#include "kirin_drm_drv.h"
>> +#include "kirin_ade_reg.h"
>> +
>> +#define to_ade_crtc(crtc) \
>> + container_of(crtc, struct ade_crtc, base)
>> +
>> +struct ade_hw_ctx {
>> + void __iomem *base;
>> + void __iomem *media_base;
>> + void __iomem *media_noc_base;
>> + int irq;
>> + struct clk *ade_core_clk;
>> + struct clk *media_noc_clk;
>> + struct clk *ade_pix_clk;
>> + bool power_on;
>> +};
>> +
>> +struct ade_crtc {
>> + struct drm_crtc base;
>> + struct ade_hw_ctx *ctx;
>> + bool enable;
>> + u32 out_format;
>> +};
>> +
>> +struct ade_data {
>> + struct ade_crtc acrtc;
>> + struct ade_hw_ctx ctx;
>> +};
>> +
>> +static void ade_update_reload_bit(void __iomem *base, u32 bit_num, u32
>> val)
>> +{
>> + u32 bit_ofst, reg_num;
>> +
>> + bit_ofst = bit_num % 32;
>> + reg_num = bit_num / 32;
>> +
>> + ade_update_bits(base + ADE_RELOAD_DIS(reg_num), bit_ofst,
>> + MASK(1), !!val);
>> +}
>> +
>> +static u32 ade_read_reload_bit(void __iomem *base, u32 bit_num)
>> +{
>> + u32 tmp, bit_ofst, reg_num;
>> +
>> + bit_ofst = bit_num % 32;
>> + reg_num = bit_num / 32;
>> +
>> + tmp = readl(base + ADE_RELOAD_DIS(reg_num));
>> + return !!(BIT(bit_ofst) & tmp);
>> +}
>> +
>> +static void ade_init(struct ade_hw_ctx *ctx)
>> +{
>> + void __iomem *base = ctx->base;
>> +
>> + /* enable clk gate */
>> + ade_update_bits(base + ADE_CTRL1, AUTO_CLK_GATE_EN_OFST,
>> + AUTO_CLK_GATE_EN, ADE_ENABLE);
>> + /* clear overlay */
>> + writel(0, base + ADE_OVLY1_TRANS_CFG);
>> + writel(0, base + ADE_OVLY_CTL);
>> + writel(0, base + ADE_OVLYX_CTL(ADE_OVLY2));
>> + /* clear reset and reload regs */
>> + writel(MASK(32), base + ADE_SOFT_RST_SEL(0));
>> + writel(MASK(32), base + ADE_SOFT_RST_SEL(1));
>> + writel(MASK(32), base + ADE_RELOAD_DIS(0));
>> + writel(MASK(32), base + ADE_RELOAD_DIS(1));
>> + /* for video mode, that ade registers
>> + * became effective at frame end
>> + */
>> + ade_update_bits(base + ADE_CTRL, FRM_END_START_OFST,
>> + FRM_END_START_MASK,
>> REG_EFFECTIVE_IN_ADEEN_FRMEND);
>> +}
>> +
>> +static void ade_ldi_set_mode(struct ade_crtc *acrtc,
>> + struct drm_display_mode *mode,
>> + struct drm_display_mode *adj_mode)
>> +{
>> + struct ade_hw_ctx *ctx = acrtc->ctx;
>> + void __iomem *base = ctx->base;
>> + u32 width = mode->hdisplay;
>> + u32 height = mode->vdisplay;
>> + u32 hfp, hbp, hsw, vfp, vbp, vsw;
>> + u32 plr_flags;
>> + int ret;
>> +
>> + plr_flags = (mode->flags & DRM_MODE_FLAG_NVSYNC) ? FLAG_NVSYNC :
>> 0;
>> + plr_flags |= (mode->flags & DRM_MODE_FLAG_NHSYNC) ? FLAG_NHSYNC :
>> 0;
>> + hfp = mode->hsync_start - mode->hdisplay;
>> + hbp = mode->htotal - mode->hsync_end;
>> + hsw = mode->hsync_end - mode->hsync_start;
>> + vfp = mode->vsync_start - mode->vdisplay;
>> + vbp = mode->vtotal - mode->vsync_end;
>> + vsw = mode->vsync_end - mode->vsync_start;
>> + if (vsw > 15) {
>> + DRM_DEBUG_DRIVER("vsw exceeded 15\n");
>> + vsw = 15;
>> + }
>> +
>> + writel((hbp << HBP_OFST) | hfp, base + LDI_HRZ_CTRL0);
>> + /* the configured value is actual value - 1 */
>> + writel(hsw - 1, base + LDI_HRZ_CTRL1);
>> + writel((vbp << VBP_OFST) | vfp, base + LDI_VRT_CTRL0);
>> + /* the configured value is actual value - 1 */
>> + writel(vsw - 1, base + LDI_VRT_CTRL1);
>> + /* the configured value is actual value - 1 */
>> + writel(((height - 1) << VSIZE_OFST) | (width - 1),
>> + base + LDI_DSP_SIZE);
>> + writel(plr_flags, base + LDI_PLR_CTRL);
>> +
>> + /* Success should be guaranteed in mode_valid call back,
>> + * so failer shouldn't happen here
>> + */
>> + ret = clk_set_rate(ctx->ade_pix_clk, mode->clock * 1000);
>> + if (ret)
>> + DRM_ERROR("failed to set pixel clk %dHz (%d)\n",
>> + mode->clock * 1000, ret);
>> + adj_mode->clock = clk_get_rate(ctx->ade_pix_clk) / 1000;
>> +
>> + /* ctran6 setting */
>> + writel(CTRAN_BYPASS_ON, base + ADE_CTRAN_DIS(ADE_CTRAN6));
>> + /* the configured value is actual value - 1 */
>> + writel(width * height - 1, base +
>> ADE_CTRAN_IMAGE_SIZE(ADE_CTRAN6));
>> + ade_update_reload_bit(base, CTRAN_OFST + ADE_CTRAN6, 0);
>> +
>> + DRM_DEBUG_DRIVER("set mode: %dx%d\n", width, height);
>> +}
>> +
>> +static int ade_power_up(struct ade_hw_ctx *ctx)
>> +{
>> + void __iomem *media_base = ctx->media_base;
>> + int ret;
>> +
>> + ret = clk_prepare_enable(ctx->media_noc_clk);
>> + if (ret) {
>> + DRM_ERROR("failed to enable media_noc_clk (%d)\n", ret);
>> + return ret;
>> + }
>> +
>> + writel(0x20, media_base + SC_MEDIA_RSTDIS);
>
>
> If this and the write in ade_power_down are to reset the
> ADE block, they should ideally belong to clock/reset subsystem
> and not touched by the driver.
yes, this is to reset ADE block.
you are right! will use reset subsystem to do the reset in v5.
Thanks for letting me know about this.
>
>
>> +
>> + ret = clk_prepare_enable(ctx->ade_core_clk);
>> + if (ret) {
>> + DRM_ERROR("failed to enable ade_core_clk (%d)\n", ret);
>> + return ret;
>> + }
>> +
>> + ade_init(ctx);
>> + ctx->power_on = true;
>> + return 0;
>> +}
>> +
>> +static void ade_power_down(struct ade_hw_ctx *ctx)
>> +{
>> + void __iomem *base = ctx->base;
>> + void __iomem *media_base = ctx->media_base;
>> +
>> + writel(ADE_DISABLE, base + LDI_CTRL);
>> + /* dsi pixel off */
>> + writel(DSI_PCLK_OFF, base + LDI_HDMI_DSI_GT);
>> +
>> + clk_disable_unprepare(ctx->ade_core_clk);
>> + writel(0x20, media_base + SC_MEDIA_RSTEN);
>> + clk_disable_unprepare(ctx->media_noc_clk);
>> + ctx->power_on = false;
>> +}
>> +
>> +static void ade_set_medianoc_qos(struct ade_crtc *acrtc)
>> +{
>> + struct ade_hw_ctx *ctx = acrtc->ctx;
>> + void __iomem *base = ctx->media_noc_base;
>> + void __iomem *reg;
>> + u32 val;
>> +
>> + reg = base + NOC_ADE0_QOSGENERATOR_MODE;
>> + val = (readl(reg) & 0xfffffffc) | 0x2;
>> + writel(val, reg);
>> +
>> + reg = base + NOC_ADE0_QOSGENERATOR_EXTCONTROL;
>> + val = readl(reg) | 0x1;
>> + writel(val, reg);
>> +
>> + reg = base + NOC_ADE1_QOSGENERATOR_MODE;
>> + val = (readl(reg) & 0xfffffffc) | 0x2;
>> + writel(val, reg);
>> +
>> + reg = base + NOC_ADE1_QOSGENERATOR_EXTCONTROL;
>> + val = readl(reg) | 0x1;
>> + writel(val, reg);
>
>
> We could at least try to pass these via syscon, since we
> don't have a framework to configure NoC QoS stuff.
yes, it is better to write regs via syscon. Will fixed in v5.
Thanks for letting me know about this.
Thanks,
-xinliang
>
> Thanks,
> Archit
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
