[PATCH v2 02/10] drm/hisilicon: Add DT binding docs for hi6220 display subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the device tree binding documentation for hi6220 SoC display subsystem.
drm master device binding doc.
ADE display controller binding doc.
DSI controller binding doc.

Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx>
Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
Signed-off-by: Andy Green <andy.green@xxxxxxxxxx>
---
 .../bindings/display/hisilicon/hisi-ade.txt        | 42 ++++++++++++++
 .../bindings/display/hisilicon/hisi-drm.txt        | 66 ++++++++++++++++++++++
 .../bindings/display/hisilicon/hisi-dsi.txt        | 53 +++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
 create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-drm.txt
 create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-dsi.txt

diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
new file mode 100644
index 0000000..2777a2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
@@ -0,0 +1,42 @@
+Device-Tree bindings for hisilicon ADE display controller driver
+
+ADE (Advanced Display Engine) is the display controller which grab image
+data from memory, do composition, do post image processing, generate RGB
+timing stream and transfer to DSI.
+
+Required properties:
+- compatible: value should be one of the following
+	"hisilicon,hi6220-ade".
+- reg: physical base address and length of the controller's registers.
+- reg-names: name of physical base.
+- interrupt: the interrupt number.
+- clocks: the clocks needed.
+- clock-names: the name of the clocks.
+- ade_core_clk_rate: ADE core clock rate.
+- media_noc_clk_rate: media noc module clock rate.
+
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+	ade: ade@f4100000 {
+		compatible = "hisilicon,hi6220-ade";
+		reg = <0x0 0xf4100000 0x0 0x7800>,
+		      <0x0 0xf4410000 0x0 0x1000>;
+		reg-names = "ade_base",
+			    "media_base";
+		interrupts = <0 115 4>;
+
+		clocks = <&media_ctrl HI6220_ADE_CORE>,
+			 <&media_ctrl HI6220_CODEC_JPEG>,
+			 <&media_ctrl HI6220_ADE_PIX_SRC>,
+			 <&media_ctrl HI6220_PLL_SYS>,
+			 <&media_ctrl HI6220_PLL_SYS_MEDIA>;
+		clock-names  = "clk_ade_core",
+			       "aclk_codec_jpeg_src",
+			       "clk_ade_pix",
+			       "clk_syspll_src",
+			       "clk_medpll_src";
+		ade_core_clk_rate = <360000000>;
+		media_noc_clk_rate = <288000000>;
+	};
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-drm.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-drm.txt
new file mode 100644
index 0000000..fd93026
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-drm.txt
@@ -0,0 +1,66 @@
+Hisilicon DRM master device
+
+The Hisilicon DRM master device is a virtual device needed to list all
+the other display relevant nodes that comprise the display subsystem.
+
+
+Required properties:
+- compatible: Should be "hisilicon,<chip>-dss"
+- #address-cells: should be set to 2.
+- #size-cells: should be set to 2.
+- range: to allow probing of subdevices.
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent.
+
+Required sub nodes:
+All the device nodes of display subsystem of SoC should be the sub nodes.
+Such as display controller node, DSI node and so on.
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+	display-subsystem {
+		compatible = "hisilicon,hi6220-dss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+
+		ade: ade@f4100000 {
+			compatible = "hisilicon,hi6220-ade";
+			reg = <0x0 0xf4100000 0x0 0x7800>,
+			      <0x0 0xf4410000 0x0 0x1000>;
+			reg-names = "ade_base",
+				    "media_base";
+			interrupts = <0 115 4>; /* ldi interrupt */
+
+			clocks = <&media_ctrl HI6220_ADE_CORE>,
+				 <&media_ctrl HI6220_CODEC_JPEG>,
+				 <&media_ctrl HI6220_ADE_PIX_SRC>,
+				 <&media_ctrl HI6220_PLL_SYS>,
+				 <&media_ctrl HI6220_PLL_SYS_MEDIA>;
+			/*clock name*/
+			clock-names  = "clk_ade_core",
+				       "aclk_codec_jpeg_src",
+				       "clk_ade_pix",
+				       "clk_syspll_src",
+				       "clk_medpll_src";
+			ade_core_clk_rate = <360000000>;
+			media_noc_clk_rate = <288000000>;
+		};
+
+		dsi: dsi@0xf4107800 {
+			compatible = "hisilicon,hi6220-dsi";
+			reg = <0x0 0xf4107800 0x0 0x100>;
+			clocks = <&media_ctrl  HI6220_DSI_PCLK>;
+			clock-names = "pclk_dsi";
+
+			port {
+				dsi_out: endpoint {
+					remote-endpoint = <&adv_in>;
+				};
+			};
+
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-dsi.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-dsi.txt
new file mode 100644
index 0000000..30abaa85
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-dsi.txt
@@ -0,0 +1,53 @@
+Device-Tree bindings for hisilicon DSI controller driver
+
+A DSI controller resides in the middle of display controller and external
+HDMI converter.
+
+Required properties:
+- compatible: value should be one of the following
+	"hisilicon,hi6220-dsi".
+- reg: physical base address and length of the controller's registers.
+- clocks: the clocks needed.
+- clock-names: the name of the clocks.
+- port: DSI controller output port. This contains one endpoint subnode, with its
+  remote-endpoint set to the phandle of the connected external HDMI endpoint.
+  See Documentation/devicetree/bindings/graph.txt for device graph info.
+
+A example of HiKey board hi6220 SoC and board specific DT entry:
+Example:
+
+SoC specific:
+	dsi: dsi@0xf4107800 {
+		compatible = "hisilicon,hi6220-dsi";
+		reg = <0x0 0xf4107800 0x0 0x100>;
+		clocks = <&media_ctrl  HI6220_DSI_PCLK>;
+		clock-names = "pclk_dsi";
+
+		port {
+			dsi_out: endpoint {
+				remote-endpoint = <&adv_in>;
+			};
+		};
+
+	};
+
+Board specific:
+	i2c2: i2c@f7102000 {
+		status = "ok";
+
+		adv7533: adv7533@39 {
+			compatible = "adi,adv7533";
+			reg = <0x39>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <1 2>;
+			pd-gpio = <&gpio0 4 0>;
+			adi,dsi-lanes = <4>;
+
+			port {
+				adv_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux