ramoops is one of the remaining places where ARM vendors still rely on
board-specific shims. Device Tree lets us replace those shims with
generic code.
These bindings mirror the ramoops module parameters, with two small
differences:
(1) dump_oops becomes an optional "no-dump-oops" property, since ramoops
sets dump_oops=1 by default.
(2) mem_type=1 becomes the more self-explanatory "unbuffered" property.
Signed-off-by: Greg Hackmann <ghackmann@xxxxxxxxxx>
---
Documentation/devicetree/bindings/misc/ramoops.txt | 30 ++++++
Documentation/ramoops.txt | 6 +-
fs/pstore/ram.c | 110 ++++++++++++++++++++-
3 files changed, 142 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/misc/ramoops.txt
diff --git a/Documentation/devicetree/bindings/misc/ramoops.txt b/Documentation/devicetree/bindings/misc/ramoops.txt
new file mode 100644
index 0000000..7b4cb01
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ramoops.txt
@@ -0,0 +1,30 @@
+Ramoops oops/panic logger
+=========================
+
+See Documentation/ramoops.txt. The bindings here are modelled after the ramoops
+kernel module parameters.
+
+
+Required properties:
+
+- compatible: must be "ramoops"
+
+- memory-region: phandle to a region of memory that is preserved between reboots
+
+
+Optional properties:
+
+- ecc-size: enables ECC support and specifies ECC buffer size in bytes
+
+- record-size: size in bytes of each dump done on oops/panic
+
+- console-size: size in bytes of kernel console log
+
+- ftrace-size: size in bytes of ftrace log
+
+- pmsg-size: size in bytes of user space message log
+
+- unbuffered: if present, use pgprot_noncached to map reserved region
+ (defaults to pgprot_writecombine)
+
+- no-dump-oops: if present, only dump panics (defaults to panics and oops)
diff --git a/Documentation/ramoops.txt b/Documentation/ramoops.txt
index 5d86756..9264bca 100644
--- a/Documentation/ramoops.txt
+++ b/Documentation/ramoops.txt
@@ -45,7 +45,7 @@ corrupt, but usually it is restorable.
2. Setting the parameters
-Setting the ramoops parameters can be done in 2 different manners:
+Setting the ramoops parameters can be done in 3 different manners:
1. Use the module parameters (which have the names of the variables described
as before).
For quick debugging, you can also reserve parts of memory during boot
@@ -54,7 +54,9 @@ Setting the ramoops parameters can be done in 2 different manners:
kernel to use only the first 128 MB of memory, and place ECC-protected ramoops
region at 128 MB boundary:
"mem=128M ramoops.mem_address=0x8000000 ramoops.ecc=1"
- 2. Use a platform device and set the platform data. The parameters can then
+ 2. Use Device Tree bindings, as described in
+ Documentation/device-tree/bindings/misc/ramoops.txt.
+ 3. Use a platform device and set the platform data. The parameters can then
be set through that platform data. An example of doing that is:
#include <linux/pstore_ram.h>
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index 319c3a6..ac29543 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -34,6 +34,8 @@
#include <linux/slab.h>
#include <linux/compiler.h>
#include <linux/pstore_ram.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#define RAMOOPS_KERNMSG_HDR "===="
#define MIN_MEM_SIZE 4096UL
@@ -458,15 +460,112 @@ static int ramoops_init_prz(struct device *dev, struct ramoops_context *cxt,
return 0;
}
+static int ramoops_parse_dt_size(struct platform_device *pdev,
+ const char *propname, unsigned long *val)
+{
+ u64 val64;
+ int ret;
+
+ ret = of_property_read_u64(pdev->dev.of_node, propname, &val64);
+ if (ret == -EINVAL) {
+ *val = 0;
+ return 0;
+ } else if (ret != 0) {
+ dev_err(&pdev->dev, "failed to parse property %s: %d\n",
+ propname, ret);
+ return ret;
+ }
+
+ if (val64 > ULONG_MAX) {
+ dev_err(&pdev->dev, "invalid %s %llu\n", propname, val64);
+ return -EOVERFLOW;
+ }
+
+ *val = val64;
+ return 0;
+}
+
+static int ramoops_parse_dt(struct platform_device *pdev,
+ struct ramoops_platform_data *pdata)
+{
+ struct device_node *of_node = pdev->dev.of_node;
+ struct device_node *mem_region;
+ struct resource res;
+ u32 ecc_size;
+ int ret;
+
+ dev_dbg(&pdev->dev, "using Device Tree\n");
+
+ mem_region = of_parse_phandle(of_node, "memory-region", 0);
+ if (!mem_region) {
+ dev_err(&pdev->dev, "no memory-region phandle\n");
+ return -ENODEV;
+ }
+
+ ret = of_address_to_resource(mem_region, 0, &res);
+ of_node_put(mem_region);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to translate memory-region to resource: %d\n",
+ ret);
+ return ret;
+ }
+
+ pdata->mem_size = resource_size(&res);
+ pdata->mem_address = res.start;
+ pdata->mem_type = of_property_read_bool(of_node, "unbuffered");
+ pdata->dump_oops = of_property_read_bool(of_node, "dump-oops");
+
+ ret = ramoops_parse_dt_size(pdev, "record-size", &pdata->record_size);
+ if (ret < 0)
+ return ret;
+
+ ret = ramoops_parse_dt_size(pdev, "console-size", &pdata->console_size);
+ if (ret < 0)
+ return ret;
+
+ ret = ramoops_parse_dt_size(pdev, "ftrace-size", &pdata->ftrace_size);
+ if (ret < 0)
+ return ret;
+
+ ret = ramoops_parse_dt_size(pdev, "pmsg-size", &pdata->pmsg_size);
+ if (ret < 0)
+ return ret;
+
+ ret = of_property_read_u32(of_node, "ecc-size", &ecc_size);
+ if (ret == 0) {
+ if (ecc_size > INT_MAX) {
+ dev_err(&pdev->dev, "invalid ecc-size %u\n", ecc_size);
+ return -EOVERFLOW;
+ }
+ pdata->ecc_info.ecc_size = ecc_size;
+ } else if (ret != -EINVAL) {
+ return ret;
+ }
+
+ return 0;
+}
+
static int ramoops_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ramoops_platform_data *pdata = pdev->dev.platform_data;
+ struct ramoops_platform_data *pdata = platform_get_drvdata(pdev);
struct ramoops_context *cxt = &oops_cxt;
size_t dump_mem_sz;
phys_addr_t paddr;
int err = -EINVAL;
+ if (dev->of_node && !pdata) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ err = -ENOMEM;
+ goto fail_out;
+ }
+
+ err = ramoops_parse_dt(pdev, pdata);
+ if (err < 0)
+ goto fail_out;
+ }
+
/* Only a single ramoops area allowed at a time, so fail extra
* probes.
*/
@@ -561,6 +660,7 @@ static int ramoops_probe(struct platform_device *pdev)
cxt->size, (unsigned long long)cxt->phys_addr,
cxt->ecc_info.ecc_size, cxt->ecc_info.block_size);
+ platform_set_drvdata(pdev, pdata);
return 0;
fail_buf:
@@ -596,11 +696,17 @@ static int ramoops_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id dt_match[] = {
+ { .compatible = "ramoops" },
+ {}
+};
+
static struct platform_driver ramoops_driver = {
.probe = ramoops_probe,
.remove = ramoops_remove,
.driver = {
- .name = "ramoops",
+ .name = "ramoops",
+ .of_match_table = dt_match,
},
};
--
2.6.0.rc2.230.g3dd15c0
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
