Re: [PATCH v1 2/2] dma-mapping-common: add DMA attribute - DMA_ATTR_IOMMU_BYPASS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Date: Wed, 28 Oct 2015 22:31:50 +0900

> On Wed, 2015-10-28 at 13:10 +0200, Shamir Rabinovitch wrote:
>> On Wed, Oct 28, 2015 at 03:30:01PM +0900, David Woodhouse wrote:
>> > > > +For systems with IOMMU it is assumed all DMA translations use the IOMMU.
>> > 
>> > Not entirely true. We have per-device dma_ops on a most architectures
>> > already, and we were just talking about the need to add them to
>> > POWER/SPARC too, because we need to avoid trying to use the IOMMU to
>> > map virtio devices too.
>> 
>> SPARC has it's implementation under arch/sparc for dma_ops (sun4v_dma_ops).
>> 
>> Some drivers use IOMMU under SPARC for example ixgbe (Intel 10G ETH).
>> Some, like IB, suffer from IOMMU MAP setup/tear-down & limited address range.
>> On SPARC IOMMU bypass is not total bypass of the IOMMU but rather much simple
>> translation that does not require any complex translations tables.
> 
> We have an option in the Intel IOMMU for pass-through mode too, which
> basically *is* a total bypass. In practice, what's the difference
> between that and a "simple translation that does not require any
> [translation]"? We set up a full 1:1 mapping of all memory, and then
> the map/unmap methods become no-ops.
> 
> Currently we have no way to request that mode on a per-device basis; we
> only have 'iommu=pt' on the command line to set it for *all* devices.
> But performance-sensitive devices might want it, while we keep doing
> proper translation for others.

In the sparc64 case, the 64-bit DMA address space is divided into
IOMMU translated and non-IOMMU translated.

You just set the high bits differently depending upon what you want.

So a device could use both IOMMU translated and bypass accesses at the
same time.  While seemingly interesting, I do not recommend we provide
this kind of flexibility in our DMA interfaces.

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux