Re: [PATCH v12 2/6] fpga: add bindings document for simple fpga bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

On Tue, Oct 27, 2015 at 05:09:11PM -0500, atull@xxxxxxxxxxxxxxxxxxxxx wrote:
> From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
> 
> New bindings document for simple fpga bus.
> 
> Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
> ---
> v9:  initial version added to this patchset
> v10: s/fpga/FPGA/g
>      replace DT overlay example with slightly more complicated example
>      move to staging/simple-fpga-bus
> v11: No change in this patch for v11 of the patch set
> v12: Moved out of staging.
>      Changed to use FPGA bridges framework instead of resets
>      for bridges.
> ---
>  .../devicetree/bindings/fpga/simple-fpga-bus.txt   |   81 ++++++++++++++++++++
>  1 file changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/simple-fpga-bus.txt
> 
> diff --git a/Documentation/devicetree/bindings/fpga/simple-fpga-bus.txt b/Documentation/devicetree/bindings/fpga/simple-fpga-bus.txt
> new file mode 100644
> index 0000000..2e742f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/simple-fpga-bus.txt
> @@ -0,0 +1,81 @@
> +Simple FPGA Bus
> +===============
> +
> +A Simple FPGA Bus is a bus that handles configuring an FPGA and its bridges
> +before populating the devices below its node.  All this happens when a device
> +tree overlay is added to the live tree.  This document describes that device
> +tree overlay.
> +

This is not really true, is it?
The driver should work without applying the overlay, e.g. the bootloader
might have already done it.

> +Required properties:
> +- compatible : should contain "simple-fpga-bus"
> +- #address-cells, #size-cells, ranges: must be present to handle address space
> +  mapping for children.
> +
> +Optional properties:
> +- fpga-mgr : should contain a phandle to a FPGA manager.
> +- fpga-firmware : should contain the name of a FPGA image file located on the
> +  firmware search path.
> +- partial-reconfig : boolean property should be defined if partial
> +  reconfiguration of the FPGA is to be done, otherwise full reconfiguration
> +  is done.
> +- fpga-bridges : should contain a list of bridges that the bus will disable
> +  before   programming the FPGA and then enable after the FPGA has been
           ^^^                                                            ???

> +
> +Example:
> +
> +/dts-v1/;
> +/plugin/;
> +/ {
> +	fragment@0 {
> +		target-path="/soc";
> +		__overlay__ {
> +			#address-cells = <1>;
> +	                #size-cells = <1>;
> +
> +			bridge@0xff200000 {
                               ^^

> +				compatible = "simple-fpga-bus";
> +				reg = <0xc0000000 0x20000000>,
> +				      <0xff200000 0x00200000>;
> +				reg-names = "axi_h2f", "axi_h2f_lw";
> +
> +				#address-cells = <0x2>;
> +				#size-cells = <0x1>;
> +
> +				ranges = <0x00000000 0x00000000 0xc0000000 0x00010000>,
> +					 <0x00000001 0x00020000 0xff220000 0x00000008>,
> +					 <0x00000001 0x00010040 0xff210040 0x00000020>;
> +
> +				clocks = <0x2 0x2>;
> +				clock-names = "h2f_lw_axi_clock", "f2h_sdram0_clock";
> +
> +				fpga-mgr = <&hps_0_fpgamgr>;
> +				fpga-firmware = "soc_system.rbf";
> +
> +				fpga-bridges = <&hps_fpgabridge0>, <&hps_fpgabridge1>, <&hps_fpgabridge2>;
> +
> +				onchip_memory2_0: memory@0x000000000 {
                                                         ^^

> +					device_type = "memory";
> +					compatible = "ALTR,onchipmem-15.1";
> +					reg = <0x00000000 0x00000000 0x00010000>;
> +				};
> +
> +				jtag_uart: serial@0x100020000 {
                                                  ^^

> +					compatible = "altr,juart-15.1", "altr,juart-1.0";
> +					reg = <0x00000001 0x00020000 0x00000008>;
> +					interrupt-parent = <&intc>;
> +					interrupts = <0 42 4>;
> +				};
> +
> +				led_pio: gpio@0x100010040 {
                                              ^^

No 0x, please.

> +					compatible = "altr,pio-15.1", "altr,pio-1.0";
> +					reg = <0x00000001 0x00010040 0x00000020>;
> +					altr,gpio-bank-width = <4>;
> +					resetvalue = <0>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +				};
> +			};
> +		};
> +	};
> +};
> +

Regards,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux