A series of patches that add yet another LED trigger, a device activity trigger. The motivation is to have a LED trigger that is associated with a device and can be fired from cetrain points in the code that have been chosen by the developer. With this this device activity trigger it is possible for instance to easily hook up a tty driver for a console to blink one LED, yet another serial port to blink a second LED and writes to a block device to trigger a third LED. The patches have been tested on Wandboard Quad. The first patch adds the actual trigger. Each device wishing to use the trigger has to be explicitly registered by calling ledtrig_dev_add(), and passing it's dev_t. The intention is that the trigger will be used in scenarios that are impossible to foresee at this moment, and are likely to be approach in a case by case manner anyway. The second patch adds couple of debugfs helpers. The third patch adds documentation and notes on debugfs interface. Maciek Borzecki (3): leds: add device activity LED triggers leds: add debugfs to device trigger Documentation: leds: document ledtrig-device trigger Documentation/leds/00-INDEX | 3 + Documentation/leds/ledtrig-device.txt | 32 ++++ drivers/leds/trigger/Kconfig | 8 + drivers/leds/trigger/Makefile | 1 + drivers/leds/trigger/ledtrig-device.c | 289 ++++++++++++++++++++++++++++++++++ include/linux/leds.h | 10 ++ 6 files changed, 343 insertions(+) create mode 100644 Documentation/leds/ledtrig-device.txt create mode 100644 drivers/leds/trigger/ledtrig-device.c -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
