Hi Guenter, On 11 June 2015 at 13:33, Guenter Roeck <linux@xxxxxxxxxxxx> wrote: > On 06/10/2015 10:47 AM, fu.wei@xxxxxxxxxx wrote: >> >> From: Fu Wei <fu.wei@xxxxxxxxxx> >> >> This driver bases on linux kernel watchdog framework. >> It supports getting timeout from parameter and FDT >> at the driver init stage. >> The first timeout period expires, the interrupt routine >> got another timeout period to run panic for saving >> system context. >> >> Signed-off-by: Fu Wei <fu.wei@xxxxxxxxxx> >> --- >> drivers/watchdog/Kconfig | 11 ++ >> drivers/watchdog/Makefile | 1 + >> drivers/watchdog/sbsa_gwdt.c | 383 >> +++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 395 insertions(+) >> create mode 100644 drivers/watchdog/sbsa_gwdt.c >> >> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig >> index e5e7c55..554f18a 100644 >> --- a/drivers/watchdog/Kconfig >> +++ b/drivers/watchdog/Kconfig >> @@ -152,6 +152,17 @@ config ARM_SP805_WATCHDOG >> ARM Primecell SP805 Watchdog timer. This will reboot your system >> when >> the timeout is reached. >> >> +config ARM_SBSA_WATCHDOG >> + tristate "ARM SBSA Generic Watchdog" >> + depends on ARM64 >> + depends on ARM_ARCH_TIMER >> + select WATCHDOG_CORE >> + help >> + ARM SBSA Generic Watchdog. This watchdog has two Watchdog >> timeouts. >> + The first timeout will trigger a panic; the second timeout will >> + trigger a system reset. >> + More details: ARM DEN0029B - Server Base System Architecture >> (SBSA) >> + >> config AT91RM9200_WATCHDOG >> tristate "AT91RM9200 watchdog" >> depends on SOC_AT91RM9200 && MFD_SYSCON >> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile >> index 5c19294..471f1b7c 100644 >> --- a/drivers/watchdog/Makefile >> +++ b/drivers/watchdog/Makefile >> @@ -30,6 +30,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o >> >> # ARM Architecture >> obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o >> +obj-$(CONFIG_ARM_SBSA_WATCHDOG) += sbsa_gwdt.o >> obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o >> obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o >> obj-$(CONFIG_CADENCE_WATCHDOG) += cadence_wdt.o >> diff --git a/drivers/watchdog/sbsa_gwdt.c b/drivers/watchdog/sbsa_gwdt.c >> new file mode 100644 >> index 0000000..1ddc10f >> --- /dev/null >> +++ b/drivers/watchdog/sbsa_gwdt.c >> @@ -0,0 +1,383 @@ >> +/* >> + * SBSA(Server Base System Architecture) Generic Watchdog driver >> + * >> + * Copyright (c) 2015, Linaro Ltd. >> + * Author: Fu Wei <fu.wei@xxxxxxxxxx> >> + * Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License 2 as published >> + * by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Note: This SBSA Generic watchdog has two stage timeouts, >> + * When the first timeout occurs, WS0(SPI or LPI) is triggered, >> + * the second timeout period(as long as the first timeout period) >> starts. >> + * In WS0 interrupt routine, panic() will be called for collecting >> + * crashdown info. >> + * If system can not recover from WS0 interrupt routine, then >> second >> + * timeout occurs, WS1(reset or higher level interrupt) is >> triggered. >> + * The two timeout period can be set by WOR(32bit). >> + * WOR gives a maximum watch period of around 10s at the maximum >> + * system counter frequency. >> + * The System Counter shall run at maximum of 400MHz. >> + * >> + * But If we need a larger timeout period, this driver will >> programme WCV >> + * directly. That can support more than 10s timeout at the maximum >> + * system counter frequency. >> + * More details: ARM DEN0029B - Server Base System Architecture >> (SBSA) >> + * >> + * SBSA GWDT: |---WOR(or WCV)---WS0---WOR(or WCV)---WS1 >> + * |-----timeout-----WS0-----timeout-----WS1 > > > If we use WCV at all, I would like to see something like > > * SBSA GWDT: |---WOR(or WCV)---WS0--------WOR------WS1 > * |-----timeout-----WS0-----------------WS1 > * panic hw reset > > where WOR would be used up to its maximum, to be replaced by WCV > (but kept at maximum) if the selected timeout is larger than the > maximum timeout selectable with WOR. Would this be possible ? for this part |-----timeout-----WS0, I am doing this way in non-pretimeout version. but for WS0-----------------WS1, do you mean WOR would always be used up to its maximum??? I don't see any variable attached on it. So I would like to confirm what is this value > > Guenter > -- Best regards, Fu Wei Software Engineer Red Hat Software (Beijing) Co.,Ltd.Shanghai Branch Ph: +86 21 61221326(direct) Ph: +86 186 2020 4684 (mobile) Room 1512, Regus One Corporate Avenue,Level 15, One Corporate Avenue,222 Hubin Road,Huangpu District, Shanghai,China 200021 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
