Le 23/05/2015 16:35, Boris Brezillon a écrit :
> Hi Corentin,
>
> On Sat, 23 May 2015 15:12:23 +0200
> Corentin LABBE <clabbe.montjoie@xxxxxxxxx> wrote:
>
>> Le 17/05/2015 10:45, Boris Brezillon a écrit :
>>> Hi Corentin,
>>>
>>> I started to review this new version, and I still think there's
>>> something wrong with the way your processing crypto requests.
>>> From my POV this is not asynchronous at all (see my comments inline),
>>> but maybe Herbert can confirm that.
>>> I haven't reviewed the hash part yet, but I guess it has the same
>>> problem.
>>
>> For resuming your conversation with Herbert, I have removed all CRYPTO_ALG_ASYNC flags.
>
> Okay. I really think you can easily deal with asynchronous request (I
> had a look at the datasheet), but I'll let maintainers decide whether
> this is important or not.
>
>
>>>> +
>>>> + if (areq->src == NULL || areq->dst == NULL) {
>>>> + dev_err(ss->dev, "ERROR: Some SGs are NULL\n");
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + spin_lock_irqsave(&ss->slock, flags);
>>>
>>> Do you really need to take this lock so early ?
>>> BTW, what is this lock protecting ?
>>
>> As I have written in the header, the spinlock protect the usage of the device.
>> In this case, I need to lock just before writing the key in the device.
>
> I'm not denying the fact that you need some locking, just how this
> locking is done: you're preventing the all system from receiving
> interrupts for the all time your doing your crypto request.
>
> Here is a suggestion (if you still want to keep the synchronous model,
> which IMHO is not a good idea, but hey, that's not my call to make).
>
> 1/ wait for the device to be ready (using a waitqueue)
> 2/ take the lock
> 3/ check if the engine is busy (already handling another crypto
> request).
> 4.1/ If the engine is not busy, mark the engine as busy, release the
> lock and proceed with the crytpo request handling.
> 4.2/ If the engine is busy, release the lock and go back to 1/
>
>
I have done a version with a crypto_queue and a kthread.
This works perfectly but.. the performance are really really bad.
Never more than 20k request/s when both generic and synchronous SS can go beyond 80k.
With this asynchronous driver, the Security System become useful only with request larger than 2048 bytes
I have patched my driver to create stats on request size, this show that real usage is less than that. (512bytes for cryptoluks for example)
Furthermore, my current patch for using the PRNG cannot be used with the kthread since it use the hwrng interface.
But perhaps by using also a crypto_rng alg it could be done.
So I think that if I want to make the SS driver useful, I cannot set it asynchronous.
Perhaps when the DMA engine will be available, this will change.
I have attached the patch that make my driver asynchronous for comments on possible improvement.
>>
>>>
>>> IMHO, taking a spinlock and disabling irqs for the whole time you're
>>> executing a crypto request is not a good idea (it will prevent all
>>> other irqs from running, and potentially introduce latencies in other
>>> parts of the kernel).
>>
>> Since crypto operation could be called by software interrupt, I need to disable them.
>> (Confirmed by http://www.makelinux.net/ldd3/chp-5-sect-5 5.5.3)
>
> Hm, you're not even using the interrupts provided by the IP to detect
> when the engine is ready to accept new data chunks (which is another
> aspect that should be addressed IMO), so I don't get why you need to
> disable HW interrupts.
> If you just want to disable SW interrupts, you can use spin_lock_bh()
> instead of spin_lock_irqsave().
>
Thanks I use spin_lock_bh now.
>>
>>>
>>> What you can do though is declare the following fields in your crypto
>>> engine struct (sun4i_ss_ctx):
>>> - a crypto request queue (struct crypto_queue [1])
>>> - a crypto_async_request variable storing the request being processed
>>> - a lock protecting the queue and the current request variable
>>>
>>> This way you'll only have to take the lock when queuing or dequeuing a
>>> request.
>>>
>>> Another comment, your implementation does not seem to be asynchronous at
>>> all: you're blocking the caller until its crypto request is complete.
>>>
>>>
>>>> +
>>>> + for (i = 0; i < op->keylen; i += 4)
>>>> + writel(*(op->key + i / 4), ss->base + SS_KEY0 + i);
>>>> +
>>>> + if (areq->info != NULL) {
>>>> + for (i = 0; i < 4 && i < ivsize / 4; i++) {
>>>> + v = *(u32 *)(areq->info + i * 4);
>>>> + writel(v, ss->base + SS_IV0 + i * 4);
>>>> + }
>>>> + }
>>>> + writel(mode, ss->base + SS_CTL);
>>>> +
>>>> + sgnum = sg_nents(areq->src);
>>>> + if (sgnum == 1)
>>>> + miter_flag = SG_MITER_FROM_SG | SG_MITER_ATOMIC;
>>>> + else
>>>> + miter_flag = SG_MITER_FROM_SG;
>>>
>>>
>>> Why is the ATOMIC flag depending on the number of sg elements.
>>> IMO it should only depends on the context you're currently in, and in
>>> your specific case, you're always in atomic context since you've taken
>>> a spinlock (and disabled irqs) a few lines above.
>>>
>>> Note that with the approach I previously proposed, you can even get rid
>>> of this ATMIC flag (or always set it depending on the context you're in
>>> when dequeuing the crypto requests).
>>>
>>
>> For sg_miter, the ATOMIC flag control the usage of kmap vs kmap_atomic.
>> Since kmap_atomic must not be held too long, I use them only for short crypto operation.
>> But I need to rebench for be sure that using kmap_atomic give faster result.
>> If I keep that, I will add a comment explaining that.
>
> Maybe you can call kmap_atomic when you're in standard context (even if
> I'm not sure this is relevant), but you definitely can't call kmap when
> you're in atomic context (see the might_sleep() line here [1]). And
> since you've taken a spinlock (and disabled all the interrupts) a few
> lines above, you're in atomic context here.
>
Thanks, now I use atomic function everywhere it need to.
>>>
>>>> + sg_miter_start(&mo, areq->dst, sgnum, miter_flag);
>>>> + sg_miter_next(&mi);
>>>> + sg_miter_next(&mo);
>>>> + if (mi.addr == NULL || mo.addr == NULL) {
>>>> + err = -EINVAL;
>>>> + goto release_ss;
>>>> + }
>>>> +
>>>> + ileft = areq->nbytes / 4;
>>>> + oleft = areq->nbytes / 4;
>>>> + oi = 0;
>>>> + oo = 0;
>>>> + do {
>>>> + todo = min3(rx_cnt, ileft, (mi.length - oi) / 4);
>>>> + if (todo > 0) {
>>>> + ileft -= todo;
>>>> + writesl(ss->base + SS_RXFIFO, mi.addr + oi, todo);
>>>
>>> Is there anything guaranteeing that your pointer is aligned on a 4 byte
>>> boundary ? If that's not the case, I guess you should copy it in a
>>> temporary variable before using writesl.
>>
>> The cra_alignmask is my guarantee.
>
> Right.
>
>>
>>>
>>>> + oi += todo * 4;
>>>> + }
>>>> + if (oi == mi.length) {
>>>> + sg_miter_next(&mi);
>>>> + oi = 0;
>>>> + }
>>>> +
>>>> + ispaces = readl_relaxed(ss->base + SS_FCSR);
>>>
>>> Is there a good reason for using the _relaxed version of readl/writel
>>> (the same comment applies a few lines below) ?
>>
>> No, it is clearly a remaining of the times where all my read/write was with _relaxed.
>
>
> Okay, then maybe you should reconsider using readl/writel, unless you
> really know why you're using relaxed versions.
>
Yes I fixed it by not using _relaxed.
>>>
>>>> + spin_unlock_irqrestore(&ss->slock, flags);
>>>> + return err;
>>>> +}
>>>> +
>>>> +/* Pure CPU driven way of doing DES/3DES with SS */
>>>> +int sun4i_ss_des_poll(struct ablkcipher_request *areq, u32 mode)
>>>> +{
>>>> + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
>>>> + struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
>>>> + struct sun4i_ss_ctx *ss = op->ss;
>>>> + int i, err = 0;
>>>> + int no_chunk = 1;
>>>> + struct scatterlist *in_sg = areq->src;
>>>> + struct scatterlist *out_sg = areq->dst;
>>>> + u8 kkey[256 / 8];
>>>> +
>>>> + if (areq->nbytes == 0)
>>>> + return 0;
>>>> +
>>>> + if (areq->info == NULL) {
>>>> + dev_err(ss->dev, "ERROR: Empty IV\n");
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + if (areq->src == NULL || areq->dst == NULL) {
>>>> + dev_err(ss->dev, "ERROR: Some SGs are NULL\n");
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + /*
>>>> + * if we have only SGs with size multiple of 4,
>>>> + * we can use the SS AES function
>>>> + */
>>>> + while (in_sg != NULL && no_chunk == 1) {
>>>> + if ((in_sg->length % 4) != 0)
>>>> + no_chunk = 0;
>>>> + in_sg = sg_next(in_sg);
>>>> + }
>>>> + while (out_sg != NULL && no_chunk == 1) {
>>>> + if ((out_sg->length % 4) != 0)
>>>> + no_chunk = 0;
>>>> + out_sg = sg_next(out_sg);
>>>> + }
>>>> +
>>>> + if (no_chunk == 1)
>>>> + return sun4i_ss_aes_poll(areq, mode);
>>>> +
>>>> + /*
>>>> + * if some SG are not multiple of 4bytes use a fallback
>>>> + * it is much easy and clean
>>>> + */
>>>
>>> Hm, is this really the best solution. I mean, you can easily pack
>>> values from non aligned sg buffers so that you have only a 4 byte
>>> aligned buffers.
>>> Moreover, by doing this you'll end up with a single
>>> sun4i_ss_ablkcipher_poll function.
>>>
>>> BTW, I wonder if there's anything preventing an AES crypto request to be
>>> forged the same way DES/3DES requests are (sg entries not aligned on 4
>>> bytes boundary).
>>
>> There are two different problem: chunking and alignment.
>> The correct alignment is handled by the crypto API with the alignmask, so the driver do not need to care about it.
>
> Yes...
>
>> The chunking is the fact that I can have a SG with a size that is non multiple of 4.
>
> and I was takling about this specific aspect here.
>
>> For DES/3DES I handle this problem by using a fallback since DES/3DES was not my priority. (but yes I will handle it in the future)
>> For AES I have assumed that it cannot happen since no test in tcrypt check for it.
>
> If that's something you're willing to address in a future version, then
> I'm fine with that.
>
>> Since all SG I get was always a multiple of 16 (AES BLOCK SIZE) it was a sort of confirmation.
>>
>> Herbert ? does am I right or a chunking test is missing for cbc(aes) in testmgr.h
>
> Okay, just sharing my vision of this thing (I'll let Herbert comment on
> this aspect): I'd say that theoretically nothing prevents one from
> splitting its sg list in chunks smaller than the block size, so I'd
> say you should use the same trick for AES.
>
I have rework the cipher functions and now they handle all possibility.
With that DES/3DES is now fully supported without fallback.
Thanks for your time and review
LABBE Corentin
--
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
index 01634aa..8f59458 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
@@ -49,7 +49,7 @@ static int sun4i_ss_opti_poll(struct ablkcipher_request *areq)
return -EINVAL;
}
- spin_lock_bh(&ss->slock);
+ /*spin_lock_bh(&ss->slock);*/
for (i = 0; i < op->keylen; i += 4)
writel(*(op->key + i / 4), ss->base + SS_KEY0 + i);
@@ -110,12 +110,12 @@ release_ss:
sg_miter_stop(&mi);
sg_miter_stop(&mo);
writel(0, ss->base + SS_CTL);
- spin_unlock_bh(&ss->slock);
+ /*spin_unlock_bh(&ss->slock);*/
return err;
}
/* Generic function that support SG with size not multiple of 4 */
-static int sun4i_ss_cipher_poll(struct ablkcipher_request *areq)
+int sun4i_ss_cipher_poll(struct ablkcipher_request *areq)
{
struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
@@ -174,7 +174,7 @@ static int sun4i_ss_cipher_poll(struct ablkcipher_request *areq)
if (no_chunk == 1)
return sun4i_ss_opti_poll(areq);
- spin_lock_bh(&ss->slock);
+ /*spin_lock_bh(&ss->slock);*/
for (i = 0; i < op->keylen; i += 4)
writel(*(op->key + i / 4), ss->base + SS_KEY0 + i);
@@ -295,7 +295,7 @@ release_ss:
sg_miter_stop(&mi);
sg_miter_stop(&mo);
writel(0, ss->base + SS_CTL);
- spin_unlock_bh(&ss->slock);
+ /*spin_unlock_bh(&ss->slock);*/
return err;
}
@@ -309,6 +309,7 @@ int sun4i_ss_cbc_aes_encrypt(struct ablkcipher_request *areq)
rctx->mode = SS_OP_AES | SS_CBC | SS_ENABLED | SS_ENCRYPTION |
op->keymode;
+ return sun4i_ss_enqueue(&areq->base);
return sun4i_ss_cipher_poll(areq);
}
@@ -320,6 +321,7 @@ int sun4i_ss_cbc_aes_decrypt(struct ablkcipher_request *areq)
rctx->mode = SS_OP_AES | SS_CBC | SS_ENABLED | SS_DECRYPTION |
op->keymode;
+ return sun4i_ss_enqueue(&areq->base);
return sun4i_ss_cipher_poll(areq);
}
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-core.c b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
index f3a410a..4b8dcef 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
@@ -22,10 +22,79 @@
#include <linux/scatterlist.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/kthread.h>
#include "sun4i-ss.h"
-static struct sun4i_ss_alg_template driver_algs[] = {
+int sun4i_ss_enqueue(struct crypto_async_request *areq)
+{
+ struct ablkcipher_request *abreq = ablkcipher_request_cast(areq);
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(abreq);
+ struct sun4i_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
+ int ret;
+
+ spin_lock_bh(&op->ss->slock);
+ ret = crypto_enqueue_request(&op->ss->queue, areq);
+ spin_unlock_bh(&op->ss->slock);
+ if (ret != -EINPROGRESS)
+ return ret;
+
+ wake_up_process(op->ss->thread);
+
+ return -EINPROGRESS;
+}
+
+static int sun4i_ss_thread(void *data) {
+ struct crypto_async_request *backlog;
+ struct crypto_async_request *arq;
+ struct sun4i_ss_ctx *ss = data;
+ u32 rtype;
+ struct ablkcipher_request *areq;
+
+ int ret;
+
+ do {
+ __set_current_state(TASK_INTERRUPTIBLE);
+ spin_lock_bh(&ss->slock);
+ backlog = crypto_get_backlog(&ss->queue);
+ arq = crypto_dequeue_request(&ss->queue);
+ spin_unlock_bh(&ss->slock);
+
+ if (backlog)
+ backlog->complete(backlog, -EINPROGRESS);
+
+ if (arq) {
+ rtype = crypto_tfm_alg_type(arq->tfm);
+ switch (rtype) {
+ /*
+ case CRYPTO_ALG_TYPE_AHASH:
+ struct ahash_request *areq = ahash_request_cast(arq);
+ ret = -1;
+ arq->complete(arq, ret);
+ break;
+ */
+ case CRYPTO_ALG_TYPE_ABLKCIPHER:
+ areq = ablkcipher_request_cast(arq);
+ ret = sun4i_ss_cipher_poll(areq);
+ /*pr_info("task cipher %d %d %d %u\n", ret,
+ sg_nents(areq->src), sg_nents(areq->dst), areq->nbytes);*/
+ /* we are in a thread and complete must be called with softirq off */
+ local_bh_disable();
+ arq->complete(arq, ret);
+ local_bh_enable();
+ break;
+ default:
+ dev_err(ss->dev, "ERROR: invalid request\n");
+ arq->complete(arq, -EINVAL);
+ }
+ } else {
+ schedule();
+ }
+ } while (!kthread_should_stop());
+ return 0;
+}
+
+static struct sun4i_ss_alg_template driver_algs[] = {/*
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.init = sun4i_hash_init,
@@ -77,14 +146,14 @@ static struct sun4i_ss_alg_template driver_algs[] = {
}
}
}
-},
+},*/
{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
.alg.crypto = {
.cra_name = "cbc(aes)",
.cra_driver_name = "cbc-aes-sun4i-ss",
.cra_priority = 300,
.cra_blocksize = AES_BLOCK_SIZE,
- .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
.cra_ctxsize = sizeof(struct sun4i_tfm_ctx),
.cra_module = THIS_MODULE,
.cra_alignmask = 3,
@@ -99,7 +168,7 @@ static struct sun4i_ss_alg_template driver_algs[] = {
.decrypt = sun4i_ss_cbc_aes_decrypt,
}
}
-},
+},/*
{ .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
.alg.crypto = {
.cra_name = "ecb(aes)",
@@ -208,7 +277,7 @@ static struct sun4i_ss_alg_template driver_algs[] = {
.decrypt = sun4i_ss_ecb_des3_decrypt,
}
}
-},
+},*/
};
static int sun4i_ss_probe(struct platform_device *pdev)
@@ -313,8 +382,16 @@ static int sun4i_ss_probe(struct platform_device *pdev)
ss->dev = &pdev->dev;
+ crypto_init_queue(&ss->queue, 50);
+
spin_lock_init(&ss->slock);
+ ss->thread = kthread_run(sun4i_ss_thread, ss, "sun4i_sskd");
+ if (IS_ERR(ss->thread)) {
+ err = PTR_ERR(ss->thread);
+ goto error_thread;
+ }
+
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
driver_algs[i].ss = ss;
switch (driver_algs[i].type) {
@@ -347,6 +424,8 @@ error_alg:
break;
}
}
+error_thread:
+ kthread_stop(ss->thread);
error_clk:
clk_disable_unprepare(ss->ssclk);
error_ssclk:
@@ -359,6 +438,8 @@ static int sun4i_ss_remove(struct platform_device *pdev)
int i;
struct sun4i_ss_ctx *ss = platform_get_drvdata(pdev);
+ kthread_stop(ss->thread);
+
sun4i_ss_hwrng_remove(&ss->hwrng);
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss.h b/drivers/crypto/sunxi-ss/sun4i-ss.h
index 2185a05..8cdf00a 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss.h
+++ b/drivers/crypto/sunxi-ss/sun4i-ss.h
@@ -132,6 +132,8 @@ struct sun4i_ss_ctx {
struct device *dev;
struct resource *res;
spinlock_t slock; /* control the use of the device */
+ struct crypto_queue queue;
+ struct task_struct *thread;
struct hwrng hwrng;
u32 seed[SS_SEED_LEN / 4];
};
@@ -165,6 +167,9 @@ struct sun4i_req_ctx {
struct sun4i_ss_ctx *ss;
};
+int sun4i_ss_enqueue(struct crypto_async_request *areq);
+int sun4i_ss_cipher_poll(struct ablkcipher_request *areq);
+
int sun4i_hash_crainit(struct crypto_tfm *tfm);
int sun4i_hash_init(struct ahash_request *areq);
int sun4i_hash_update(struct ahash_request *areq);
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
