Hi Fu Wei,
Some minor comments inline.
On 2015年05月25日 18:03, fu.wei@xxxxxxxxxx wrote:
From: Fu Wei <fu.wei@xxxxxxxxxx>
Parse SBSA Generic Watchdog Structure in GTDT table of ACPI,
and create a platform device with that information.
This platform device can be used by the ARM SBSA Generic
Watchdog driver.
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
Tested-by: Timur Tabi <timur@xxxxxxxxxxxxxx>
Signed-off-by: Fu Wei <fu.wei@xxxxxxxxxx>
---
arch/arm64/kernel/acpi.c | 145 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 145 insertions(+)
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 8b83955..c95deec 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -23,6 +23,7 @@
#include <linux/irqdomain.h>
#include <linux/memblock.h>
#include <linux/of_fdt.h>
+#include <linux/platform_device.h>
#include <linux/smp.h>
#include <asm/cputype.h>
@@ -343,3 +344,147 @@ void __init acpi_gic_init(void)
early_acpi_os_unmap_memory((char *)table, tbl_size);
}
please add
#ifdef CONFIG_ARM_SBSA_WATCHDOG
(acpi gtdt code)
#endif
+
+static int __init acpi_gtdt_import_sbsa_gwdt(struct acpi_gtdt_watchdog *wd,
+ int index)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+ u32 gsi, flags;
+ int irq, trigger, polarity;
+ resource_size_t rf_base_phy, cf_base_phy;
+ int err = -ENOMEM;
+
+ /*
+ * Get SBSA Generic Watchdog info
+ * from a Watchdog GT type structure in GTDT
+ */
+ rf_base_phy = (resource_size_t)wd->refresh_frame_address;
+ cf_base_phy = (resource_size_t)wd->control_frame_address;
+ gsi = wd->timer_interrupt;
+ flags = wd->timer_flags;
+
+ pr_debug("GTDT: a Watchdog GT structure(0x%llx/0x%llx gsi:%u flags:0x%x)\n",
+ rf_base_phy, cf_base_phy, gsi, flags);
+
+ if (!(rf_base_phy && cf_base_phy && gsi)) {
+ pr_err("GTDT: failed geting the device info.\n");
+ return -EINVAL;
+ }
+
+ trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
+ : ACPI_LEVEL_SENSITIVE;
+ polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
+ : ACPI_ACTIVE_HIGH;
+ irq = acpi_register_gsi(NULL, gsi, trigger, polarity);
+ if (irq < 0) {
+ pr_err("GTDT: failed to register GSI of the Watchdog GT.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Add a platform device named "sbsa-gwdt" to match the platform driver.
+ * "sbsa-gwdt": SBSA(Server Base System Architecture) Generic Watchdog
+ * The platform driver can get device info below by matching this name.
* The platform driver (drivers/watchdog/sbsa_gwdt.c) can get device info
below by matching this name.
Adding the file name which will help for review and maintain in my
opinion.
+ */
+ pdev = platform_device_alloc("sbsa-gwdt", index);
+ if (!pdev)
+ goto err_unregister_gsi;
+
+ res = kcalloc(3, sizeof(*res), GFP_KERNEL);
+ if (!res)
+ goto err_device_put;
+
+ /*
+ * According to SBSA specification the size of refresh and control
+ * frames of SBSA Generic Watchdog is SZ_4K(Offset 0x000 – 0xFFF).
+ */
+ res[0].start = rf_base_phy;
+ res[0].end = rf_base_phy + SZ_4K - 1;
+ res[0].name = "refresh";
+ res[0].flags = IORESOURCE_MEM;
+
+ res[1].start = cf_base_phy;
+ res[1].end = cf_base_phy + SZ_4K - 1;
+ res[1].name = "control";
+ res[1].flags = IORESOURCE_MEM;
+
+ res[2].start = irq;
+ res[2].end = res[2].start;
+ res[2].name = "ws0";
+ res[2].flags = IORESOURCE_IRQ;
+
+ err = platform_device_add_resources(pdev, res, 3);
+ if (err)
+ goto err_free_res;
+
+ err = platform_device_add(pdev);
...
+ if (err)
+ goto err_free_res;
+
+ return 0;
How about
if (!err)
return 0;
then no need for goto err_free_res and save two lines of codes.
Other than that,
Acked-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
Thanks
Hanjun
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
