Re: [PATCH v6 1/2] Devicetree: Add pl353 smc controller devicetree binding information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Punnaiah-

A few nitpicks here, in case you'll be spinning up a new version of your
patchset.

On Mon, Apr 13, 2015 at 09:41:51PM +0530, Punnaiah Choudary Kalluri wrote:
> Add pl353 static memory controller devicetree binding information.
>
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
[..]
> @@ -0,0 +1,37 @@
> +Device tree bindings for ARM PL353 static memory controller
> +
> +PL353 static memory controller supports two kinds of memory
> +interfaces. i.e NAND and SRAM/NOR interfaces.
> +The actual devices are instantiated from the child nodes of pl353 smc node.
> +
> +Required properties:
> +- compatible		: Should be "arm,pl353-smc-r2p1"
> +- reg			: Controller registers map and length.
> +- clock-names		: List of input clock names - "memclk", "aclk"
> +			  (See clock bindings for details).
> +- clocks		: Clock phandles (see clock bindings for details).

Technically not clock phandles, but clock specifiers.

> +- address-cells	: Address cells, must be 1.
> +- size-cells		: Size cells. Must be 1.

These should have the leading '#' as in '#address-cells' and
'#size-cells'.

  Josh

Attachment: pgpUw6Zu6Oytg.pgp
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux