On Thu, Apr 02, 2015 at 01:39:28PM -0400, cmetcalf@xxxxxxxxxx wrote:
> From: Chris Metcalf <cmetcalf@xxxxxxxxxx>
>
> Change the default behavior of watchdog so it only runs on the
> housekeeping cores when nohz_full is enabled at build and boot time.
>
> Allow modifying the set of cores the watchdog is currently running
> on with a new kernel.watchdog_cpumask sysctl.
>
> Signed-off-by: Chris Metcalf <cmetcalf@xxxxxxxxxx>
> ---
> Technically this is only v2, but I accidentally replied to an
> earlier email after adding v2 to the subject line, so for clarity
> I'm calling this thread v3.
>
> This change depends on my earlier change to add a
> tick_nohz_full_clear_cpus() API. If folks are OK with my doing so, I can
> add it to the set of patches I'm planning to ask Linus to pull for 4.1.
>
> Documentation/lockup-watchdogs.txt | 6 ++++++
> Documentation/sysctl/kernel.txt | 9 +++++++++
> include/linux/nmi.h | 1 +
> include/linux/sched.h | 3 +++
> kernel/sysctl.c | 7 +++++++
> kernel/watchdog.c | 33 ++++++++++++++++++++++++++++++++-
> 6 files changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/lockup-watchdogs.txt b/Documentation/lockup-watchdogs.txt
> index ab0baa692c13..82a99eedf904 100644
> --- a/Documentation/lockup-watchdogs.txt
> +++ b/Documentation/lockup-watchdogs.txt
> @@ -61,3 +61,9 @@ As explained above, a kernel knob is provided that allows
> administrators to configure the period of the hrtimer and the perf
> event. The right value for a particular environment is a trade-off
> between fast response to lockups and detection overhead.
> +
> +By default, the watchdog runs on all online cores. However, on a
> +kernel configured with NO_HZ_FULL, by default the watchdog runs only
> +on the housekeeping cores, not the cores specified in the "nohz_full"
> +boot argument. In either case, the set of cores running the watchdog
> +may be adjusted via the kernel.watchdog_cpumask sysctl.
> diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
> index 83ab25660fc9..5821dc6bb5c2 100644
> --- a/Documentation/sysctl/kernel.txt
> +++ b/Documentation/sysctl/kernel.txt
> @@ -858,6 +858,15 @@ example. If a system hangs up, try pressing the NMI switch.
>
> ==============================================================
>
> +watchdog_cpumask:
> +
> +This value can be used to control on which cpus the watchdog will run.
> +The default cpumask specifies every core, but if NO_HZ_FULL is enabled
> +in the kernel config, and cores are specified with the nohz_full= boot
> +argument, those cores are excluded by default.
> +
> +==============================================================
> +
> watchdog_thresh:
>
> This value can be used to control the frequency of hrtimer and NMI
> diff --git a/include/linux/nmi.h b/include/linux/nmi.h
> index 9b2022ab4d85..cebf36e618e0 100644
> --- a/include/linux/nmi.h
> +++ b/include/linux/nmi.h
> @@ -70,6 +70,7 @@ int hw_nmi_is_cpu_stuck(struct pt_regs *);
> u64 hw_nmi_get_sample_period(int watchdog_thresh);
> extern int watchdog_user_enabled;
> extern int watchdog_thresh;
> +extern unsigned long *watchdog_mask_bits;
> extern int sysctl_softlockup_all_cpu_backtrace;
> struct ctl_table;
> extern int proc_dowatchdog(struct ctl_table *, int ,
> diff --git a/include/linux/sched.h b/include/linux/sched.h
> index 6d77432e14ff..a6f048f4fbeb 100644
> --- a/include/linux/sched.h
> +++ b/include/linux/sched.h
> @@ -377,6 +377,9 @@ extern void touch_all_softlockup_watchdogs(void);
> extern int proc_dowatchdog_thresh(struct ctl_table *table, int write,
> void __user *buffer,
> size_t *lenp, loff_t *ppos);
> +extern int proc_dowatchdog_mask(struct ctl_table *table, int write,
> + void __user *buffer,
> + size_t *lenp, loff_t *ppos);
> extern unsigned int softlockup_panic;
> void lockup_detector_init(void);
> #else
> diff --git a/kernel/sysctl.c b/kernel/sysctl.c
> index 88ea2d6e0031..2fb96ffa56d1 100644
> --- a/kernel/sysctl.c
> +++ b/kernel/sysctl.c
> @@ -860,6 +860,13 @@ static struct ctl_table kern_table[] = {
> .extra2 = &sixty,
> },
> {
> + .procname = "watchdog_cpumask",
> + .data = &watchdog_mask_bits,
> + .maxlen = NR_CPUS,
> + .mode = 0644,
> + .proc_handler = proc_dowatchdog_mask,
> + },
> + {
> .procname = "softlockup_panic",
> .data = &softlockup_panic,
> .maxlen = sizeof(int),
> diff --git a/kernel/watchdog.c b/kernel/watchdog.c
> index 3174bf8e3538..2140c2d81dc9 100644
> --- a/kernel/watchdog.c
> +++ b/kernel/watchdog.c
> @@ -19,6 +19,7 @@
> #include <linux/sysctl.h>
> #include <linux/smpboot.h>
> #include <linux/sched/rt.h>
> +#include <linux/tick.h>
>
> #include <asm/irq_regs.h>
> #include <linux/kvm_para.h>
> @@ -31,6 +32,8 @@ int __read_mostly sysctl_softlockup_all_cpu_backtrace;
> #else
> #define sysctl_softlockup_all_cpu_backtrace 0
> #endif
> +static cpumask_var_t watchdog_mask;
> +unsigned long *watchdog_mask_bits;
>
> static int __read_mostly watchdog_running;
> static u64 __read_mostly sample_period;
> @@ -431,6 +434,10 @@ static void watchdog_enable(unsigned int cpu)
> hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> hrtimer->function = watchdog_timer_fn;
>
> + /* Exit if the cpu is not allowed for watchdog. */
> + if (!cpumask_test_cpu(cpu, watchdog_mask))
> + do_exit(0);
> +
Besides the do_exit(), a printk is probably needed.
> /* Enable the perf event */
> watchdog_nmi_enable(cpu);
>
> @@ -653,6 +660,8 @@ static void watchdog_disable_all_cpus(void)
> }
> }
>
> +static DEFINE_MUTEX(watchdog_proc_mutex);
> +
I posted a patchset to akpm a while ago from Uli that changed things around
with regards to the procfs stuff. Andrew queued it, but I wasn't sure if
there was other issues with it or if it is good to go for 4.1. So this
piece and the stuff below might get modified later..
> /*
> * proc handler for /proc/sys/kernel/nmi_watchdog,watchdog_thresh
> */
> @@ -662,7 +671,6 @@ int proc_dowatchdog(struct ctl_table *table, int write,
> {
> int err, old_thresh, old_enabled;
> bool old_hardlockup;
> - static DEFINE_MUTEX(watchdog_proc_mutex);
>
> mutex_lock(&watchdog_proc_mutex);
> old_thresh = ACCESS_ONCE(watchdog_thresh);
> @@ -700,12 +708,35 @@ out:
> mutex_unlock(&watchdog_proc_mutex);
> return err;
> }
> +
> +int proc_dowatchdog_mask(struct ctl_table *table, int write,
> + void __user *buffer, size_t *lenp, loff_t *ppos)
> +{
> + int err;
> +
> + mutex_lock(&watchdog_proc_mutex);
> + err = proc_do_large_bitmap(table, write, buffer, lenp, ppos);
> + if (!err && write && watchdog_user_enabled) {
> + watchdog_disable_all_cpus();
> + watchdog_enable_all_cpus(false);
> + }
> + mutex_unlock(&watchdog_proc_mutex);
> + return err;
> +}
> +
> #endif /* CONFIG_SYSCTL */
Hmm, based on the procfs changes in the new code, instead of a do_exit(),
what if we do a 'return' instead. This keeps the thread registered but does
nothing. Later if we update the watchdog_cpumask, a restart easily enables
the soft/hard watchdog pieces.
The new procfs changes tries hard to handle a 'restart' scenario better as
the procfs variables are updated. This piece could fit nicely into that, I
think.
Those changes start here: https://lkml.org/lkml/2015/2/5/626
Cheers,
Don
>
> void __init lockup_detector_init(void)
> {
> set_sample_period();
>
> + alloc_bootmem_cpumask_var(&watchdog_mask);
> + cpumask_copy(watchdog_mask, cpu_possible_mask);
> + tick_nohz_full_clear_cpus(watchdog_mask);
> +
> + /* The sysctl API requires a variable holding a pointer to the mask. */
> + watchdog_mask_bits = cpumask_bits(watchdog_mask);
> +
> if (watchdog_user_enabled)
> watchdog_enable_all_cpus(false);
> }
> --
> 2.1.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
