[RFC/PATCHv2 2/3] dt-binding: spi: spi-dw: Select 16b or 32b access for Designware SPI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>

Altera's Arria10 architecture requires a 32bit write accesses for
APB peripherals. The current spi-dw driver uses 16bit accesses in
some locations. This patch updated the bindings with an optional
field in the devicetree to select 32bit accesses.

Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/spi/spi-dw.txt |    1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt
index 7b63ed6..034dbdd 100644
--- a/Documentation/devicetree/bindings/spi/spi-dw.txt
+++ b/Documentation/devicetree/bindings/spi/spi-dw.txt
@@ -11,6 +11,7 @@ Required properties:
 
 Optional properties:
 - cs-gpios: see spi-bus.txt
+- 32bit_access : use 32 bit register accesses
 
 Example:
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux