Rename the regulator_set_optimum_mode() function regulator_set_load() to
better represent what's going on.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
---
Documentation/power/regulator/consumer.txt | 2 +-
drivers/regulator/core.c | 8 ++++----
include/linux/regulator/consumer.h | 12 +++++++++---
3 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 8afb236c..e51564c 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -137,7 +137,7 @@ Indirect operating mode control.
Consumer drivers can request a change in their supply regulator operating mode
by calling :-
-int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+int regulator_set_load(struct regulator *regulator, int load_uA);
This will cause the core to recalculate the total load on the regulator (based
on all its consumers) and change operating mode (if necessary and permitted)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 27fb349..b137578 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3018,7 +3018,7 @@ unsigned int regulator_get_mode(struct regulator *regulator)
EXPORT_SYMBOL_GPL(regulator_get_mode);
/**
- * regulator_set_optimum_mode - set regulator optimum operating mode
+ * regulator_set_load - set regulator load
* @regulator: regulator source
* @uA_load: load current
*
@@ -3041,9 +3041,9 @@ EXPORT_SYMBOL_GPL(regulator_get_mode);
* DRMS will sum the total requested load on the regulator and change
* to the most efficient operating mode if platform constraints allow.
*
- * Returns the new regulator mode or error.
+ * On error a negative errno is returned.
*/
-int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
+int regulator_set_load(struct regulator *regulator, int uA_load)
{
struct regulator_dev *rdev = regulator->rdev;
int ret;
@@ -3055,7 +3055,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
return ret;
}
-EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
+EXPORT_SYMBOL_GPL(regulator_set_load);
/**
* regulator_allow_bypass - allow the regulator to go into bypass mode
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index d17e1ff..6d4e9d2 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -238,7 +238,7 @@ int regulator_get_current_limit(struct regulator *regulator);
int regulator_set_mode(struct regulator *regulator, unsigned int mode);
unsigned int regulator_get_mode(struct regulator *regulator);
-int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+int regulator_set_load(struct regulator *regulator, int load_uA);
int regulator_allow_bypass(struct regulator *regulator, bool allow);
@@ -479,8 +479,7 @@ static inline unsigned int regulator_get_mode(struct regulator *regulator)
return REGULATOR_MODE_NORMAL;
}
-static inline int regulator_set_optimum_mode(struct regulator *regulator,
- int load_uA)
+static inline int regulator_set_load(struct regulator *regulator, int load_uA)
{
return REGULATOR_MODE_NORMAL;
}
@@ -555,4 +554,11 @@ static inline int regulator_is_supported_voltage_tol(struct regulator *regulator
target_uV + tol_uV);
}
+/* TEMP: Wrapper to keep bisectability */
+static inline int regulator_set_optimum_mode(struct regulator *regulator,
+ int load_uA)
+{
+ return regulator_set_load(regulator, load_uA);
+}
+
#endif
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
