From: Kevin Hilman <khilman@xxxxxxxxxx>
Add support for "ina231" as compatible string, and update
Documentation and Kconfig accordingly.
Tested with the Exynos5422-based odroid-xu3 board which has on-board
INA231 sensors.
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxx>
---
Documentation/hwmon/ina2xx | 9 +++++++++
drivers/hwmon/Kconfig | 4 ++--
drivers/hwmon/ina2xx.c | 1 +
3 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index 4223c2d3b508..c2f838f65ee4 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -26,6 +26,12 @@ Supported chips:
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
+ * Texas Instruments INA231
+ Prefix: 'ina231'
+ Addresses: I2C 0x40 - 0x4f
+ Datasheet: Publicly available at the Texas Instruments website
+ http://www.ti.com/
+
Author: Lothar Felten <l-felten@xxxxxx>
Description
@@ -44,6 +50,9 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage.
The INA230 is a high or low side current shunt and power monitor with an I2C
interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
+The INA231 is a high or low side current shunt and power monitor with an I2C
+interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
+
The shunt value in micro-ohms can be set via platform data or device tree.
Please refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
if the device tree is used.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6529c09c46f0..408fb6f5f055 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1420,8 +1420,8 @@ config SENSORS_INA2XX
tristate "Texas Instruments INA219 and compatibles"
depends on I2C
help
- If you say yes here you get support for INA219, INA220, INA226, and
- INA230 power monitor chips.
+ If you say yes here you get support for INA219, INA220, INA226,
+ INA230, and INA231 power monitor chips.
The INA2xx driver is configured for the default configuration of
the part as described in the datasheet.
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index e01feba909c3..8c4a29bd2eaf 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -287,6 +287,7 @@ static const struct i2c_device_id ina2xx_id[] = {
{ "ina220", ina219 },
{ "ina226", ina226 },
{ "ina230", ina226 },
+ { "ina231", ina226 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ina2xx_id);
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
