Hi Pavel, Sakari,
On 11/20/2014 04:03 PM, Sakari Ailus wrote:
Hi Pavel,
On Thu, Nov 20, 2014 at 02:17:13PM +0100, Pavel Machek wrote:
Add attributes neccessary for LED flashes to
devicetree/bindings/leds/common.txt .
This will allow me to add device tree support for adp1653 i2c flash
LED driver, and allow Jacek Anaszewski to add support for more LED
drivers..
Signed-off-by: Pavel Machek <pavel@xxxxxx>
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 2d88816..e9acbbc 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -14,6 +14,15 @@ Optional properties for child nodes:
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
+- max-microamp : maximum intensity in microamperes of the LED
+ (torch LED for flash devices)
+- flash-max-microamp : maximum intensity in microamperes of the
+ flash LED; it is mandatory if the LED should
+ support the flash mode
+- flash-timeout-microsec : timeout in microseconds after which the flash
+ LED is turned off
It might be good to add a note that these may be arrays, depending on the
device.
This binding is for a sub-node representing a single led.
Do you know devices which would require an array of max currents
for a sub-led?
Regards,
Jacek
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html