Hi Tanmay, On Wed, Sep 17, 2014 at 6:33 AM, Tanmay Inamdar <tinamdar@xxxxxxx> wrote: > This patch adds support for AppliedMicro X-Gene PCIe host controller. The > driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint > cards. > > X-Gene PCIe controller driver has depedency on the pcie arm64 arch support. > Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and > support for creating generic pcie bridge from device tree. Liviu's patches > are available here > https://lkml.org/lkml/2014/9/8/333 > > If someone wishes to test PCIe on X-Gene with this patch set, above mentioned > patches from Liviu must be applied before the patches in this patch set. Also > please use latest xgene u-boot firmware. > > changes since V8: > 1. Add 'dma-coherent' attribute in device node. I just tested your V9 patches plus Liviu's V10 PCI/ARM64 patches against 3.17-rc5 on Mustang, and the following failure is triggered: [ 1.190131] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 1.200249] tg3.c:v3.137 (May 11, 2014) [ 1.204087] ------------[ cut here ]------------ [ 1.208682] WARNING: CPU: 1 PID: 1 at drivers/pci/pci.c:131 pci_ioremap_bar+0x70/0x78() [ 1.216646] Modules linked in: [ 1.219696] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc5+ #1 [ 1.226018] Call trace: [ 1.228453] [<ffffffc0000884f0>] dump_backtrace+0x0/0x16c [ 1.233826] [<ffffffc00008866c>] show_stack+0x10/0x1c [ 1.238851] [<ffffffc0006e3210>] dump_stack+0x74/0x94 [ 1.243878] [<ffffffc0000a934c>] warn_slowpath_common+0x88/0xb0 [ 1.249767] [<ffffffc0000a9438>] warn_slowpath_null+0x14/0x20 [ 1.255485] [<ffffffc0003994c4>] pci_ioremap_bar+0x6c/0x78 [ 1.260942] [<ffffffc0005598cc>] tg3_init_one+0x148/0x16f4 [ 1.266401] [<ffffffc00039ccf0>] pci_device_probe+0x78/0xd4 [ 1.271946] [<ffffffc00042785c>] driver_probe_device+0x94/0x390 [ 1.277834] [<ffffffc000427c44>] __driver_attach+0x98/0xa0 [ 1.283293] [<ffffffc000425a54>] bus_for_each_dev+0x54/0x98 [ 1.288835] [<ffffffc00042730c>] driver_attach+0x1c/0x28 [ 1.294121] [<ffffffc000426f04>] bus_add_driver+0x164/0x240 [ 1.299663] [<ffffffc000428430>] driver_register+0x64/0x130 [ 1.305207] [<ffffffc00039c97c>] __pci_register_driver+0x3c/0x48 [ 1.311181] [<ffffffc000aa8a5c>] tg3_driver_init+0x1c/0x28 [ 1.316640] [<ffffffc0000814e0>] do_one_initcall+0xc4/0x1b4 [ 1.322186] [<ffffffc000a74b64>] kernel_init_freeable+0x1b8/0x25c [ 1.328246] [<ffffffc0006de318>] kernel_init+0xc/0xd4 [ 1.333278] ---[ end trace f4dca5ab5b436080 ]--- [ 1.337871] tg3 0000:01:00.0: Cannot map device registers, aborting [ 1.344122] tg3: probe of 0000:01:00.0 failed with error -12 Thanks, > > changes since V7: > 1. Fix outbound region mapping for IO region. Thanks Liviu for the catch. > > changes since V6: > 1. Port driver to changed interface as per Liviu's v10 series. > > changes since V5: > 1. Port driver to changed interface of 'of_create_pci_host_bridge' > 2. Fix the prefetch bit setting > 3. Removed bunch of register programming which is already done by firmware > > changes since V4: > 1. fix section mismatch warnings > 2. fix the patch description > 3. fix indentation > 4. update read/write cfg functions by passing both addr and offset. > 5. use 'time_before' for timeout. > 6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get' > 7. remove BUG_ON for pci_ioremap_io. > > changes since V3: > 1. remove 'struct hw_pci' and supporting ops in hw_pci > 2. add code to create the host bridge from dts > 3. add code to scan the the host bridge > 4. modify outbound windows setup function to get resource information from > 'bridge->windows' > 5. add compatible string in pcie dts node with current X-Gene SOC name. > > changes since V2: > 1. redefined each PCI port in different PCI domain correctly. > 2. removed setup_lane and setup_link functions from driver. > 3. removed scan_bus wrapper and set_primary_bus hack. > 4. added pci_ioremap_io for io resources. > > changes since V1: > 1. added PCI domain support > 2. reading cpu and pci addresses from device tree to configure regions. > 3. got rid of unnecessary wrappers for readl and writel. > 4. got rid of endpoint configuration code. > 5. added 'dma-ranges' property support to read inbound region configuration. > 6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c' > 7. dropped 'clock-names' property from bindings > 8. added comments whereever requested. > > > Tanmay Inamdar (4): > pci:host: APM X-Gene PCIe host controller driver > arm64: dts: APM X-Gene PCIe device tree nodes > dt-bindings: pci: xgene pcie device tree bindings > MAINTAINERS: entry for APM X-Gene PCIe host driver > > .../devicetree/bindings/pci/xgene-pci.txt | 57 ++ > MAINTAINERS | 8 + > arch/arm64/boot/dts/apm-mustang.dts | 8 + > arch/arm64/boot/dts/apm-storm.dtsi | 165 ++++++ > drivers/pci/host/Kconfig | 10 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pci-xgene.c | 646 +++++++++++++++++++++ > 7 files changed, 895 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt > create mode 100644 drivers/pci/host/pci-xgene.c > > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Ming Lei -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
