Hi, On Wednesday 27 August 2014 07:26 PM, Lee Jones wrote: > On Wed, 27 Aug 2014, Vignesh R wrote: > >> Number of averaging, open delay, sample delay are made DT parameters. >> By decreasing averaging and delays more samples can be obtained per >> second increasing performance of ADC. Previously the number of >> averages per step was fixed to 16. Making these parameters >> configurable will help in balancing speed vs accuracy. >> For each ADC step provide DT based paramters to set open delay, >> sample delay and number of averaging. One configurable step is >> used per ADC channel. Since there can be atmost 8 ADC channels, >> steps 16 to 8 are used for ADC. >> >> Signed-off-by: Vignesh R <vigneshr@xxxxxx> >> --- >> .../bindings/input/touchscreen/ti-tsc-adc.txt | 18 +++++++ >> drivers/iio/adc/ti_am335x_adc.c | 49 +++++++++++++++++--- >> include/linux/mfd/ti_am335x_tscadc.h | 3 ++ >> 3 files changed, 63 insertions(+), 7 deletions(-) > > [...] > >> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h >> index fb96c84..26d3e84 100644 >> --- a/include/linux/mfd/ti_am335x_tscadc.h >> +++ b/include/linux/mfd/ti_am335x_tscadc.h >> @@ -82,14 +82,17 @@ > > There are so many different formats at play here, it's difficult to > see what's happening where! I did not understand "different formats". Please explain. > >> #define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) >> #define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) >> #define STEPCONFIG_FIFO1 BIT(26) >> +#define STEPCONFIG_AVG_MAX 16 >> >> /* Delay register */ >> #define STEPDELAY_OPEN_MASK (0x3FFFF << 0) >> #define STEPDELAY_OPEN(val) ((val) << 0) > > What's the point in shifting by zero? I agree. But my patch did not add these lines. I can remove them. Do you want me to do this change as part of current patch or as a separate cleanup patch? > >> #define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) >> +#define STEPDELAY_OPEN_MAX 0x3FFFF > > Put this up the top, then you can use it when defining > STEPDELAY_OPEN_MASK. Done. > >> #define STEPDELAY_SAMPLE_MASK (0xFF << 24) >> #define STEPDELAY_SAMPLE(val) ((val) << 24) >> #define STEPCONFIG_SAMPLEDLY STEPDELAY_SAMPLE(0) >> +#define STEPDELAY_SAMPLE_MAX 0xFF > >> /* Charge Config */ >> #define STEPCHARGE_RFP_MASK (7 << 12) > Regards Vignesh R -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
