Re: [PATCH v4 8/8] ARM: mm: allow text and rodata sections to be read-only

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 19, 2014 at 7:36 AM, Will Deacon <will.deacon@xxxxxxx> wrote:
> On Wed, Aug 13, 2014 at 06:06:33PM +0100, Kees Cook wrote:
>> This introduces CONFIG_DEBUG_RODATA, making kernel text and rodata
>> read-only. Additionally, this splits rodata from text so that rodata can
>> also be NX, which may lead to wasted memory when aligning to SECTION_SIZE.
>> The read-only areas are made writable during ftrace updates and kexec.
>
> [...]
>
>> diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
>> index af9a8a927a4e..b8c75e45a950 100644
>> --- a/arch/arm/kernel/ftrace.c
>> +++ b/arch/arm/kernel/ftrace.c
>> @@ -15,6 +15,7 @@
>>  #include <linux/ftrace.h>
>>  #include <linux/uaccess.h>
>>  #include <linux/module.h>
>> +#include <linux/stop_machine.h>
>>
>>  #include <asm/cacheflush.h>
>>  #include <asm/opcodes.h>
>> @@ -35,6 +36,22 @@
>>
>>  #define      OLD_NOP         0xe1a00000      /* mov r0, r0 */
>>
>> +static int __ftrace_modify_code(void *data)
>> +{
>> +     int *command = data;
>> +
>> +     set_kernel_text_rw();
>> +     ftrace_modify_all_code(*command);
>> +     set_kernel_text_ro();
>> +
>> +     return 0;
>> +}
>> +
>> +void arch_ftrace_update_code(int command)
>> +{
>> +     stop_machine(__ftrace_modify_code, &command, NULL);
>> +}
>> +
>>  static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
>>  {
>>       return rec->arch.old_mcount ? OLD_NOP : NOP;
>> @@ -73,6 +90,8 @@ int ftrace_arch_code_modify_prepare(void)
>>  int ftrace_arch_code_modify_post_process(void)
>>  {
>>       set_all_modules_text_ro();
>> +     /* Make sure any TLB misses during machine stop are cleared. */
>> +     flush_tlb_all();
>
> I'm afraid I don't understand what you're trying to achieve here. What do
> you mean by `clearing a TLB miss'?

The concern with the local TLB flush when using section_update is that
another CPU might come along and load the temporarily-writable page
permissions during the time the first CPU has called
set_kernel_text_rw() and set_kernel_text_ro(). The call here to
flush_tlb_all() is to make sure all CPUs have the correct page
permissions visible again.

(This is all to work around the a15 errata, and also part of the
output from the thread I mentioned in my 7/8 comment reply.)

>
> [...]
>
>> diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
>> index ccf392ef40d4..35c838da90d5 100644
>> --- a/arch/arm/mm/init.c
>> +++ b/arch/arm/mm/init.c
>> @@ -626,9 +626,10 @@ struct section_perm {
>>       unsigned long end;
>>       pmdval_t mask;
>>       pmdval_t prot;
>> +     pmdval_t clear;
>>  };
>>
>> -struct section_perm nx_perms[] = {
>> +static struct section_perm nx_perms[] = {
>>       /* Make pages tables, etc before _stext RW (set NX). */
>>       {
>>               .start  = PAGE_OFFSET,
>> @@ -643,8 +644,35 @@ struct section_perm nx_perms[] = {
>>               .mask   = ~PMD_SECT_XN,
>>               .prot   = PMD_SECT_XN,
>>       },
>> +#ifdef CONFIG_DEBUG_RODATA
>> +     /* Make rodata NX (set RO in ro_perms below). */
>> +     {
>> +             .start  = (unsigned long)__start_rodata,
>> +             .end    = (unsigned long)__init_begin,
>> +             .mask   = ~PMD_SECT_XN,
>> +             .prot   = PMD_SECT_XN,
>> +     },
>> +#endif
>>  };
>>
>> +#ifdef CONFIG_DEBUG_RODATA
>> +static struct section_perm ro_perms[] = {
>> +     /* Make kernel code and rodata RX (set RO). */
>> +     {
>> +             .start  = (unsigned long)_stext,
>> +             .end    = (unsigned long)__init_begin,
>> +#ifdef CONFIG_ARM_LPAE
>> +             .mask   = ~PMD_SECT_RDONLY,
>> +             .prot   = PMD_SECT_RDONLY,
>> +#else
>> +             .mask   = ~(PMD_SECT_APX | PMD_SECT_AP_WRITE),
>> +             .prot   = PMD_SECT_APX | PMD_SECT_AP_WRITE,
>> +             .clear  = PMD_SECT_AP_WRITE,
>> +#endif
>> +     },
>> +};
>> +#endif
>> +
>>  /*
>>   * Updates section permissions only for the current mm (sections are
>>   * copied into each mm). During startup, this is the init_mm.
>> @@ -713,6 +741,24 @@ static inline void fix_kernmem_perms(void)
>>  {
>>       set_section_perms(nx_perms, prot);
>>  }
>> +
>> +#ifdef CONFIG_DEBUG_RODATA
>> +void mark_rodata_ro(void)
>> +{
>> +     set_section_perms(ro_perms, prot);
>> +}
>> +
>> +void set_kernel_text_rw(void)
>> +{
>> +     set_section_perms(ro_perms, clear);
>> +}
>
> How does this work with LPAE? I don't see a populated clear field there.

LPAE's case has .clear=0 since it only needs the mask -- it has no
bits from the mask to set when clearing. Maybe I need better field
names. It was "'mask' used to unset bits" with "bits to set when
'prot'ecting" and "bits to set when 'clear'ing".

The non-LPAE case masks out "~(PMD_SECT_APX | PMD_SECT_AP_WRITE)" and
then sets either "PMD_SECT_APX | PMD_SECT_AP_WRITE" to set the ro
state, or sets "PMD_SECT_AP_WRITE" to clear the ro state.

The LPAE case masks out "~PMD_SECT_RDONLY" and then sets either
"PMD_SECT_RDONLY" to set the ro state, or sets nothing to clear the ro
state (the mask did everything needed to clear the ro state).

-Kees

-- 
Kees Cook
Chrome OS Security
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux