On Thursday, August 14, 2014 12:01 AM, Suravee Suthikulpanit wrote:
>
> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
>
> ARM GICv2m specification extends GICv2 to support MSI(-X) with
> a new set of register frame. This patch introduces support for
> the non-secure GICv2m register frame. Currently, GICV2m is available
> in certain version of GIC-400.
>
> The patch introduces a new property in ARM gic binding, the v2m subnode.
> It is optional.
Hi Suravee Suthikulpanit,
I added some minor comments.
>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
> Cc: Mark Rutland <Mark.Rutland@xxxxxxx>
> Cc: Marc Zyngier <Marc.Zyngier@xxxxxxx>
> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
> Cc: Catalin Marinas <Catalin.Marinas@xxxxxxx>
> Cc: Will Deacon <Will.Deacon@xxxxxxx>
> ---
> Documentation/devicetree/bindings/arm/gic.txt | 32 ++++
> drivers/irqchip/Kconfig | 7 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-gic-v2m.c | 215 ++++++++++++++++++++++++++
> drivers/irqchip/irq-gic.c | 75 +++++----
> drivers/irqchip/irq-gic.h | 48 ++++++
> 6 files changed, 348 insertions(+), 30 deletions(-)
> create mode 100644 drivers/irqchip/irq-gic-v2m.c
> create mode 100644 drivers/irqchip/irq-gic.h
>
> diff --git a/Documentation/devicetree/bindings/arm/gic.txt
> b/Documentation/devicetree/bindings/arm/gic.txt
> index 5573c08..8a64179 100644
> --- a/Documentation/devicetree/bindings/arm/gic.txt
> +++ b/Documentation/devicetree/bindings/arm/gic.txt
> @@ -95,3 +95,35 @@ Example:
> <0x2c006000 0x2000>;
> interrupts = <1 9 0xf04>;
> };
> +
> +
Please remove the unnecessary line.
> +* GICv2m extension for MSI/MSI-x support (Optional)
> +
> +Certain revision of GIC-400 supports MSI/MSI-x via V2M register frame.
> +This is enabled by specifying v2m sub-node.
> +
> +Required properties:
> +
> +- msi-controller : Identifies the node as an MSI controller.
> +
> +- reg : GICv2m MSI interface register base and size
> +
> +Example:
> +
> + interrupt-controller@e1101000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-controller;
> + interrupts = <1 8 0xf04>;
> + ranges = <0 0 0 0xe1100000 0 0x100000>;
> + reg = <0x0 0xe1110000 0 0x01000>,
> + <0x0 0xe112f000 0 0x02000>,
> + <0x0 0xe1140000 0 0x10000>,
> + <0x0 0xe1160000 0 0x10000>;
> + v2m {
> + msi-controller;
> + reg = <0x0 0x80000 0 0x1000>;
> + };
> + };
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 4e230e7..9aa5edc 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -7,6 +7,13 @@ config ARM_GIC
> select IRQ_DOMAIN
> select MULTI_IRQ_HANDLER
>
> +config ARM_GIC_V2M
> + bool
> + select IRQ_DOMAIN
> + select MULTI_IRQ_HANDLER
> + depends on ARM_GIC
> + depends on PCI && PCI_MSI
> +
> config GIC_NON_BANKED
> bool
>
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 73052ba..3bda951 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
> obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi-nmi.o
> obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
> obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
> +obj-$(CONFIG_ARM_GIC_V2M) += irq-gic-v2m.o
> obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o
> obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
> obj-$(CONFIG_ARM_VIC) += irq-vic.o
> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
> new file mode 100644
> index 0000000..1ac0ace
> --- /dev/null
> +++ b/drivers/irqchip/irq-gic-v2m.c
> @@ -0,0 +1,215 @@
> +/*
> + * ARM GIC v2m MSI(-X) support
> + * Support for Message Signalelled Interrupts for systems that
s/Signalelled/Signaled
> + * implement ARM Generic Interrupt Controller: GICv2m.
> + *
> + * Copyright (C) 2014 Advanced Micro Devices, Inc.
> + * Authors: Suravee Suthikulpanit <suravee.suthikulpanit@xxxxxxx>
> + * Harish Kasiviswanathan <harish.kasiviswanathan@xxxxxxx>
> + * Brandon Anderson <brandon.anderson@xxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pci.h>
> +#include <linux/irq.h>
> +#include <linux/spinlock.h>
> +#include <linux/slab.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/bitmap.h>
Please, re-order these headers alphabetically.
It enhances the readability.
> +
> +#include "irqchip.h"
> +#include "irq-gic.h"
> +
> +/*
> +* MSI_TYPER:
> +* [31:26] Reserved
> +* [25:16] lowest SPI assigned to MSI
> +* [15:10] Reserved
> +* [9:0] Numer of SPIs assigned to MSI
> +*/
> +#define V2M_MSI_TYPER 0x008
> +#define V2M_MSI_TYPER_BASE_SHIFT (16)
> +#define V2M_MSI_TYPER_BASE_MASK (0x3FF)
> +#define V2M_MSI_TYPER_NUM_MASK (0x3FF)
These braces are unnecessary.
Please remove them as follows.
+#define V2M_MSI_TYPER_BASE_SHIFT 16
+#define V2M_MSI_TYPER_BASE_MASK 0x3FF
+#define V2M_MSI_TYPER_NUM_MASK 0x3FF
> +#define V2M_MSI_SETSPI_NS 0x040
> +#define V2M_MIN_SPI 32
> +#define V2M_MAX_SPI 1019
> +
> +/*
> + * alloc_msi_irq - Allocate MSIs from avaialbe MSI bitmap.
s/avaialbe/available
> + * @data: Pointer to v2m_data
> + * @nvec: Number of interrupts to allocate
> + * @irq: Pointer to the allocated irq
> + *
> + * Allocates interrupts only if the contiguous range of MSIs
> + * with specified nvec are available. Otherwise return the number
> + * of available interrupts. If none are available, then returns -ENOENT.
> + */
> +static int alloc_msi_irq(struct v2m_data *data, int nvec, int *irq)
> +{
> + int size = data->nr_spis;
> + int next = size, i = nvec, ret;
> +
> + /* We should never allocate more than available nr_spis */
> + if (i >= size)
> + i = size;
> +
> + spin_lock(&data->msi_cnt_lock);
> +
> + for (; i > 0; i--) {
> + next = bitmap_find_next_zero_area(data->bm,
> + size, 0, i, 0);
> + if (next < size)
> + break;
> + }
> +
> + if (i != nvec) {
> + ret = i ? : -ENOENT;
> + } else {
> + bitmap_set(data->bm, next, nvec);
> + *irq = data->spi_start + next;
> + ret = 0;
> + }
> +
> + spin_unlock(&data->msi_cnt_lock);
> +
> + return ret;
> +}
> +
> +static void gicv2m_teardown_msi_irq(struct msi_chip *chip, unsigned int irq)
> +{
> + int pos;
> + struct v2m_data *data = container_of(chip, struct v2m_data, msi_chip);
> +
> + spin_lock(&data->msi_cnt_lock);
> +
> + pos = irq - data->spi_start;
> + if (pos >= 0 && pos < data->nr_spis)
> + bitmap_clear(data->bm, pos, 1);
> +
> + spin_unlock(&data->msi_cnt_lock);
> +}
> +
> +static int gicv2m_setup_msi_irq(struct msi_chip *chip, struct pci_dev *pdev,
> + struct msi_desc *desc)
> +{
> + int avail, irq = 0;
> + struct msi_msg msg;
> + phys_addr_t addr;
> + struct v2m_data *data = container_of(chip, struct v2m_data, msi_chip);
> +
> + if (!desc) {
> + dev_err(&pdev->dev,
> + "GICv2m: MSI setup failed. Invalid msi descriptor\n");
> + return -EINVAL;
> + }
> +
> + avail = alloc_msi_irq(data, 1, &irq);
> + if (avail != 0) {
> + dev_err(&pdev->dev,
> + "GICv2m: MSI setup failed. Cannnot allocate IRQ\n");
> + return -ENOSPC;
> + }
> +
> + irq_set_chip_data(irq, chip);
> + irq_set_msi_desc(irq, desc);
> + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
> +
> + addr = data->res.start + V2M_MSI_SETSPI_NS;
> +
> + msg.address_hi = (u32)(addr >> 32);
> + msg.address_lo = (u32)(addr);
> + msg.data = irq;
> + write_msi_msg(irq, &msg);
> +
> + return 0;
> +}
> +
> +static void gicv2m_mask_irq(struct irq_data *d)
> +{
> + gic_mask_irq(d);
> + if (d->msi_desc)
> + mask_msi_irq(d);
> +}
> +
> +static void gicv2m_unmask_irq(struct irq_data *d)
> +{
> + gic_unmask_irq(d);
> + if (d->msi_desc)
> + unmask_msi_irq(d);
> +}
> +
> +static struct irq_chip gicv2m_chip;
> +
> +#ifdef CONFIG_OF
> +int __init
> +gicv2m_of_init(struct device_node *node, struct gic_chip_data *gic)
> +{
> + int ret;
> + unsigned int val;
> + struct v2m_data *v2m = &gic->v2m_data;
> +
> + v2m->msi_chip.owner = THIS_MODULE;
> + v2m->msi_chip.of_node = node;
> + v2m->msi_chip.setup_irq = gicv2m_setup_msi_irq;
> + v2m->msi_chip.teardown_irq = gicv2m_teardown_msi_irq;
> + ret = of_pci_msi_chip_add(&v2m->msi_chip);
> + if (ret) {
> + pr_info("GICv2m: Failed to add msi_chip.\n");
You don't need to add "GICv2m:" to all pr_*() functions.
Instead, you can add the following one at the top of the this .c file.
#define pr_fmt(fmt) " GICv2m: " fmt
> + return ret;
> + }
> +
> + if (of_address_to_resource(node, 0, &v2m->res)) {
> + pr_err("GICv2m: Failed locate GICv2m MSI register frame\n");
> + return -EINVAL;
> + }
> +
> + v2m->base = of_iomap(node, 0);
> + if (!v2m->base) {
> + pr_err("GICv2m: Failed to map GIC MSI registers\n");
> + return -EINVAL;
> + }
> +
> + val = readl_relaxed(v2m->base + V2M_MSI_TYPER);
> + if (!val) {
> + pr_warn("GICv2m: Failed to read V2M_MSI_TYPER register\n");
> + return -EINVAL;
> + }
> +
> + v2m->spi_start = (val >> V2M_MSI_TYPER_BASE_SHIFT) &
> + V2M_MSI_TYPER_BASE_MASK;
> + v2m->nr_spis = val & V2M_MSI_TYPER_NUM_MASK;
> + if ((v2m->spi_start < V2M_MIN_SPI) || (v2m->nr_spis >= V2M_MAX_SPI)) {
> + pr_err("GICv2m: Invalid MSI_TYPER (%#x)\n", val);
> + return -EINVAL;
> + }
> +
> + v2m->bm = kzalloc(sizeof(long) * BITS_TO_LONGS(v2m->nr_spis),
> + GFP_KERNEL);
> + if (!v2m->bm) {
> + pr_err("GICv2m: Failed to allocate MSI bitmap\n");
> + return -ENOMEM;
> + }
> +
> + spin_lock_init(&v2m->msi_cnt_lock);
> +
> + pr_info("GICv2m: SPI range [%d:%d]\n",
> + v2m->spi_start, (v2m->spi_start + v2m->nr_spis));
> +
> + memcpy(&gicv2m_chip, gic->irq_chip, sizeof(struct irq_chip));
> + gicv2m_chip.name = "GICv2m",
> + gicv2m_chip.irq_mask = gicv2m_mask_irq;
> + gicv2m_chip.irq_unmask = gicv2m_unmask_irq;
> + gic->irq_chip = &gicv2m_chip;
> +
> + return 0;
> +}
> +
> +#endif /* CONFIG_OF */
[.....]
Best regards,
Jingoo Han
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
