This patch add compatible data for dwc2 controller found on
rk3066, rk3188 and rk3288 processors from rockchip.
Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---
drivers/usb/dwc2/platform.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index a10e7a3..cc5983c 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -75,6 +75,34 @@ static const struct dwc2_core_params params_bcm2835 = {
.uframe_sched = 0,
};
+static const struct dwc2_core_params params_rk3066 = {
+ .otg_cap = 2, /* no HNP/SRP capable */
+ .otg_ver = 0, /* 1.3 */
+ .dma_enable = 1,
+ .dma_desc_enable = 0,
+ .speed = 0, /* High Speed */
+ .enable_dynamic_fifo = 1,
+ .en_multiple_tx_fifo = 1,
+ .host_rx_fifo_size = 520, /* 520 DWORDs */
+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
+ .host_perio_tx_fifo_size = 256, /* 256 DWORDs */
+ .max_transfer_size = 65536,
+ .max_packet_count = 512,
+ .host_channels = 9,
+ .phy_type = 1, /* UTMI */
+ .phy_utmi_width = 16, /* 8 bits */
+ .phy_ulpi_ddr = 0, /* Single */
+ .phy_ulpi_ext_vbus = 0,
+ .i2c_enable = 0,
+ .ulpi_fs_ls = 0,
+ .host_support_fs_ls_low_power = 0,
+ .host_ls_low_power_phy_clk = 0, /* 48 MHz */
+ .ts_dline = 0,
+ .reload_ctl = 1,
+ .ahbcfg = 0x17, /* dma enable & INCR16 */
+ .uframe_sched = 1,
+};
+
/**
* dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
* DWC_otg driver
@@ -97,6 +125,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
static const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 },
+ { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 },
{ .compatible = "snps,dwc2", .data = NULL },
{},
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
