Add more details from a recent kernel newbies mailing list discussion here: http://www.spinics.net/lists/newbies/msg52747.html Also list the operations available and add details about safe accesses. v2: * updated with comments from Christoph Lameter Signed-off-by: Pranith Kumar <bobby.prani@xxxxxxxxx> CC: Christoph Lameter <cl@xxxxxxxxx> --- Documentation/this_cpu_ops.txt | 129 ++++++++++++++++++++++++++++++++++------- scripts/bin2c | Bin 0 -> 8706 bytes 2 files changed, 108 insertions(+), 21 deletions(-) create mode 100755 scripts/bin2c diff --git a/Documentation/this_cpu_ops.txt b/Documentation/this_cpu_ops.txt index 1a4ce7e..b1faa9d 100644 --- a/Documentation/this_cpu_ops.txt +++ b/Documentation/this_cpu_ops.txt @@ -13,22 +13,51 @@ operating on the per cpu variable. This means there are no atomicity issues between the calculation of the offset and the operation on the data. Therefore it is not -necessary to disable preempt or interrupts to ensure that the +necessary to disable preemption or interrupts to ensure that the processor is not changed between the calculation of the address and the operation on the data. Read-modify-write operations are of particular interest. Frequently processors have special lower latency instructions that can operate -without the typical synchronization overhead but still provide some -sort of relaxed atomicity guarantee. The x86 for example can execute -RMV (Read Modify Write) instructions like inc/dec/cmpxchg without the +without the typical synchronization overhead, but still provide some +sort of relaxed atomicity guarantees. The x86, for example, can execute +RMW (Read Modify Write) instructions like inc/dec/cmpxchg without the lock prefix and the associated latency penalty. Access to the variable without the lock prefix is not synchronized but synchronization is not necessary since we are dealing with per cpu data specific to the currently executing processor. Only the current processor should be accessing that variable and therefore there are no -concurrency issues with other processors in the system. +concurrency issues with other processors in the system. Please see the +section "Remote access to per-CPU data" if you need remote access. + +The main use of the this_cpu operations has been to optimize counter +operations. + +The following this_cpu() operations with implied preemption protection +are defined. These operations can be used without worrying about +preemption and interrupts. + + this_cpu_add() + this_cpu_read(pcp) + this_cpu_write(pcp, val) + this_cpu_add(pcp, val) + this_cpu_and(pcp, val) + this_cpu_or(pcp, val) + this_cpu_add_return(pcp, val) + this_cpu_xchg(pcp, nval) + this_cpu_cmpxchg(pcp, oval, nval) + this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) + this_cpu_sub(pcp, val) + this_cpu_inc(pcp) + this_cpu_dec(pcp) + this_cpu_sub_return(pcp, val) + this_cpu_inc_return(pcp) + this_cpu_dec_return(pcp) + + +Inner working of this_cpu operations +------------------------------------ On x86 the fs: or the gs: segment registers contain the base of the per cpu area. It is then possible to simply use the segment override @@ -53,12 +82,11 @@ this_cpu_ops such sequence also required preempt disable/enable to prevent the kernel from moving the thread to a different processor while the calculation is performed. -The main use of the this_cpu operations has been to optimize counter -operations. +Consider the following this_cpu operation this_cpu_inc(x) -results in the following single instruction (no lock prefix!) +The above results in the following single instruction (no lock prefix!) inc gs:[x] @@ -100,11 +128,10 @@ Takes the offset of a per cpu variable (&x !) and returns the address of the per cpu variable that belongs to the currently executing processor. this_cpu_ptr avoids multiple steps that the common get_cpu/put_cpu sequence requires. No processor number is -available. Instead the offset of the local per cpu area is simply +available. Instead, the offset of the local per cpu area is simply added to the percpu offset. - Per cpu variables and offsets ----------------------------- @@ -118,15 +145,16 @@ Therefore the use of x or &x outside of the context of per cpu operations is invalid and will generally be treated like a NULL pointer dereference. -In the context of per cpu operations + DEFINE_PER_CPU(int, x); - x is a per cpu variable. Most this_cpu operations take a cpu - variable. +In the context of per cpu operations the above implies that x is a per +cpu variable. Most this_cpu operations take a cpu variable. - &x is the *offset* a per cpu variable. this_cpu_ptr() takes - the offset of a per cpu variable which makes this look a bit - strange. + int __percpu *p = &x; +&x and hence p is the *offset* of a per cpu variable. this_cpu_ptr() +takes the offset of a per cpu variable which makes this look a bit +strange. Operations on a field of a per cpu structure @@ -172,16 +200,40 @@ if we do not make use of this_cpu ops later to manipulate fields: Variants of this_cpu ops ------------------------- -this_cpu ops are interrupt safe. Some architecture do not support +this_cpu ops are interrupt safe. Some architectures do not support these per cpu local operations. In that case the operation must be replaced by code that disables interrupts, then does the operations that are guaranteed to be atomic and then reenable interrupts. Doing so is expensive. If there are other reasons why the scheduler cannot change the processor we are executing on then there is no reason to -disable interrupts. For that purpose the __this_cpu operations are -provided. For example. +disable interrupts. For that purpose the following __this_cpu operations +are provided. + +These operations have no guarantee against concurrent interrupts or +preemption. If a per cpu variable is not used in an interrupt context +and the scheduler cannot preempt then they are safe. + +Note that interrupts may still occur while an operation is +in progress and if the interrupt too modifies the variable, then RMW +actions may not be atomic. + + __this_cpu_add() + __this_cpu_read(pcp) + __this_cpu_write(pcp, val) + __this_cpu_add(pcp, val) + __this_cpu_and(pcp, val) + __this_cpu_or(pcp, val) + __this_cpu_add_return(pcp, val) + __this_cpu_xchg(pcp, nval) + __this_cpu_cmpxchg(pcp, oval, nval) + __this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) + __this_cpu_sub(pcp, val) + __this_cpu_inc(pcp) + __this_cpu_dec(pcp) + __this_cpu_sub_return(pcp, val) + __this_cpu_inc_return(pcp) + __this_cpu_dec_return(pcp) - __this_cpu_inc(x); Will increment x and will not fallback to code that disables interrupts on platforms that cannot accomplish atomicity through @@ -189,7 +241,6 @@ address relocation and a Read-Modify-Write operation in the same instruction. - &this_cpu_ptr(pp)->n vs this_cpu_ptr(&pp->n) -------------------------------------------- @@ -202,4 +253,40 @@ with (). The second form also is consistent with the way this_cpu_read() and friends are used. +Remote access to per-CPU data +------------------------------ + +Per cpu data structures are for the use of one cpu exclusively. If you +use the variables as intended, this_cpu_ops() are guaranteed to be +"atomic" as no other CPU has access to these data structures. But there +are special cases where you might need to access per cpu data structures +remotely. One such case is to perform maintenance tasks of idle CPUs +without having to wake them up using IPIs for power saving purposes. +It is usually safe to do a remote read access and that is frequently +done to summarize counters. Remote write access is the one which is +problematic. This is not recommended unless absolutely necessary. + +To access per-cpu data structure remotely, you need to convert the +per-cpu offset to a pointer using this_cpu_ptr(). + + DEFINE_PER_CPU(struct data, datap); + struct data *p = per_cpu(&datap, cpu); + +p can now be passed to another CPU to be updated remotely. + +This makes it explicit that we are getting ready to access a foreing +percpu area. + +You can also do the following to convert the datap offset to an address + + struct data *p = this_cpu_ptr(&datap); + +but, passing of pointers calculated via this_cpu_ptr to other cpus is +unusual and should be avoided. + +Such remote accesses to per CPU data are not guaranteed to be atomic +anymore. You will have to use atomic_t and rely on the standard atomic +operations for these remote accesses to be atomic. + Christoph Lameter, April 3rd, 2013 +Pranith Kumar, July 16th, 2014 diff --git a/scripts/bin2c b/scripts/bin2c new file mode 100755 index 0000000000000000000000000000000000000000..58f44ba9ae94ca23445e244fb83132e779ffe4ad GIT binary patch literal 8706 zcmeHMZ){W76~DIgkI*`XF&1Dg9t~4kEhb4J4Mnui`2)`=2^lyo9fTLhb`r0N9of%q z!lW)*+Nv(JtF%?B_F-cmrtx9Yx@nr|G=XWR_RECmv`X!|P7xYY(mxVYS%jv6_dEC9 zV?Vz*64JD9T+8>I^SkGq`{&(z?z``Px3}+r+vO6R+~P4o((P(ZLRK!sxeZcOSf^Mg zG;zP!CTf6G<FCmQq87*WrgF`+PU(3-tMKo1TR^8<lMK_ZTCiZsEhI|ym6E1di+-jm zU@C-PmXjT|)#sHW=!j&PYN{QBin1MvWY?_hnw1^XE2?2kxqs9*`iGUjuv>#fvPMMo z$h<^Jm(t)hGe-QIwNeDtB*S#K1q-HZ_f6PQJMT34l;ROp-&*5xUG<Nt62-2`#AwIv zU6Zkv$wV?c(=yZ9(bBOykVysFWxvTk=^h*yk~Q%-HbSB{Z^EDE0F{65(r=ER*?aQX zlYcvZ^?jpuZu4N@A=W1!R=@mW4m>52$A==^1&KK`s%N7Ug#3*)@W+7r@pq;N095j` zehvIS;2XpiG3XlsCj`$2f$@sc@N@{nm`*2>=9m$kcv?(n&5X#Hu|!fBp~J>_+>Anj zl#PrTNt?!0go=#usZ>%ShB(+4>gqPy0}lsw7y0(U9;(lcALSlN=^41?bKt=;w<Oll z$oE5wu<TZn-Qp?mlx{YRNJ?W&&xaHDht{5bo;9j|(sbpyK{kFHu9g77qS=Pq{kPh1 zp3|h?X~XU7UZ4N0PCs3}XT4wOFXYYYrEVze^M9yYAgfX;?AZa8!p<h-4cj$vBu|jS z@?rsL=T?%b>C0E7ypd#T@^W6v^(0eMm*14Kn`CO@@>$5i@O;4)%H0^s-8%YQ(|p1G z)-SPQ%_{x$fG>19+*EhLgnW_wx8;{Ez@qIVYR83~4gNXchV66E5&G%<Z`J$7(({1k zZx+m5xwq#RTy6OaXIOt}7DX!y4cR|md>Po%Ll8fGvtj%5WG*ahGg;qqJ=Z9kko)k$ z57-)w*o(sB!)^KCiG{Y$L%H`(>ba}>{NJw+hC}b>N1&*`d+B-&k#{xh0!ts>E);IC z|MO4cfeh&_G#~W&n_fM4?OFHm!g;Ej9>k5|i&RutRQ)+m66;^O>4CnUdt1Ns$>X}~ zik^E%fA4k{_P?|2|5UWUs_f_X|7x8d({#fSESH``(}&-w{xKle7Yj6w`uzT5wNNm( z6`QbO=%OD{8v2DR!^_`+$?`ME#u~Qw2oZcTm@5RI2<29SL!sRJ!EoOzJL}+JNPne; z=+V9hueE)oU%KU?8MgHLtwKS6;dAqT?tfqIlfK+a4}26h{Z+@K(f59u{e&jo@!{Z! z;BfF{&{!B73$Xqdn2&O<s;NoqF`7zdOn-DDlJ@V+93Muuzh11{Ax_NfY;B(r>-N>x zTPlbWC^RyOQ*r-(|IXOHdg0pU*+;Rz8vj-_ZVvP{&~u;zcu<3&8hZNyD9u;DT9g!T zDY;G^5w01ZYui1wb+5T<eT35<y8<5%k%CH<^@V6cIq9GKPoXeEx?bM_Z{wkc_0QJL ziO09@d+6b&9RyRH#c+#7=v^S7%j-MiKIm<H(bMhq&sVvB;cX0heLdbfDztP>&=K?@ zP5|`3@9y<BzUt}q`d_K)^){cW*1fGS*67~O`PzQ3HtFpQdRv3u<}R<l%i9S3E;yrh z{~rIB;Kv?!$mQL1cLeT^z}*qJI|6HuKpq=ErL&4k0U5vBF}+6>oUhU(cdwFTcz>X@ zMdozg8j;*KC97~Rwko+%mD8R=iOc_WyO1LJ4Yx+5c;=h%SaOX-g~+=txn9X~?*LEl z=ad>PBEGCB6MCVO39l!Vc(0g|l65{IRvp8{R}`+P{xa@UGPk=`>EWeXCaxdbk?hZ+ zYCpDSDf4(<SMp_5uFU`MgwL_gidIy=YVZa~X|tkVSF}S>S!l}+c6UGOZyp-WCe7@w zzC<#TPWg8S9tk|$($=1pXxoDpAndAuIs@%3ZF_Ax0E7r+W~a=^D5#mX=mc|kJBp{L zMIf0n<AGpTsKtzoD``BL4UA?JIGrY9B0$naBr_obvDqa2S=3BhCC|junM5jCCKxD7 z$0s9Xpt$KtQv?#p1adPzgM17E%2Kh284-c_gfW(mOvR0f7;IUxER0Ax9htQ(nE!SZ zYVaPJN<>k03J#G4WG$A*(M(1JqN%B=c#>X>{>Mb?kLDWB^G>%0sr3DY*PjHD@w{aD z0Wh`rvwhgDK`MRU@Jp$bRh3xDwIR3Ln{G|wrgGRMrBdd!??KTD)(F@ChFg=$Z#eAf zy_gcOM@z!HF&K&oY@c^)kSKmgBF<Svo^7e`Y|rcW31Ad6*q-B%JQ)J#xC2%u=lGoj zN^73&d7WQYfk=H`D#kh1WBN4gDTc7jab!{1bKIf0Xm7u446;-B)0nb7$1R^4XtsBb zANT)xhdswZP1(<&oD$j7-ryX+SAkKxsC|@p-#D-Ac|Wj9t+p~xG>5<4eo@7zMP)xi zO19)vJkuXSw%cneerc-1J9uCmcI@&;4tw6`Vl=6dINn>*>h_;S0oBjdOxJ3VgqT+L zmLwsWscsbknxA%i{vOER33nGYEyij8TZjFUs((q<Uq#MsiJu=sc`!6b)pRTF>-^o& zsqd8k2-^mmJ@5OCYT`Tfo$?2;r6zLybi$|PzeD?vp-Xd*?Rnqh@4Ec`mggte&-3RW zu(j9E-^p%Lr;u3Rl1eh;pQ6BSFVuU7{0N6KjSUrLJEk{)+wC=Fuc-!dJJ}7}vHWi^ zgmM4rvkaxdJG3uAm+EgNBU@to!#0dq(xt?dt`E3wS)j6?sQT+zQQ;0z`r)->w{KQ2 znj`AL-G{;!{JH-ezi53{s{f_!mbX(5=g#^qt;)Fvt?P7as|x8GY`7xs5oSfas`$QZ zcjiG<%~#Z~!Iw$Rt}1yCc3R$F?1dhT%3?+Rb%OVUa{YRtRcUre@*eD@9KY>_9z=eQ z%jNjJg5zyD?iCzI%kc)pMa>RL-h;)$anD}p!54RqXXW_DVw@_+za%*Rl;fKaPe$yJ z<UKe&aJ;Y=dc@}9_wsTarv+Z$wgL}MBfM^HFy>|HzMvd;?uyoWsuKUC<ye+zepkXb z0e9i6n6qDB1MU|0iq;wpTq$*cC49tzhZKI+fg8YGX#X+QUtTv!iLV~#*Oi~V!_QBp z{_5woR=@I6AJ4r`16N9y!B*-oX;d1Yzev-KtLB3huU9{Jio<jx#OGQmBCAEmU35xx zJoo#6Z=~^5^O?g;3vfRh+h|DQtLI5r`mrf0b_{r>`=(joKFl|c^K3aM{j6ShFRtPL zXUdOr-u@c6pPkz1CEy#}jY4;f!)3zp2EgmOO4)o2oW_SP94N(QF2v^&SAvarFn~VH zw-JZ`I^g7o@2%OSLFqfkVVlzDxFo+(!^kgjwl2{}f%{8hksAO`{dM~P)*AYB-q~0w zevT%R?a@F~MAK%*%;E-t?g0;VA2IquN5h68V)1l*JdweX*D$Ay=wvDx&xi_;VZ>6# z_+)A{GHJxjR61isvNO1Hn3|r9oAFqn<B@i{f~=rq(23SMpBgxGre}q9qK##zre<Mc zlMFftm#G@Yfg{2GUZZ!Q2aUB_&U~42Oc*^+4Fvl`-O#d?$lFd~9PB&X73?z(A2@Kd zH*AE1U46aePF{#cGg;Y2+?0m<jnaUG`@3m4!jaL*xS+$cbx|tsRyB<;OX-4CUbL1& zMqD1Zm1F14t3%hYd3W5&Vn{P7V<M7_p%HYIE9)|{nK*h}YCrY3c+>0f9#2A5je~*X uzv9&maOu*xWJVXj#-V47BWh}NPew8s%nQT7nDDcp!QzQhHdJ!>#eV@-GqxfC literal 0 HcmV?d00001 -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
