A Flexgen structure is composed by:
- a clock cross bar (represented by a mux element)
- a pre and final dividers (represented by a divider and gate elements)
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@xxxxxxxxxx>
Acked-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
.../devicetree/bindings/clock/st/st,clkgen.txt | 5 +
.../devicetree/bindings/clock/st/st,flexgen.txt | 119 +++++++++++++++++++++
2 files changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/st/st,flexgen.txt
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 427bad8..78978f1 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -32,6 +32,10 @@ address is common of all subnode.
vcc_node {
...
};
+
+ flexgen_node {
+ ...
+ };
...
};
@@ -45,6 +49,7 @@ Each subnode should use the binding discribe in [2]..[7]
[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
[6] Documentation/devicetree/bindings/clock/st,vcc.txt
[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
Required properties:
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
new file mode 100644
index 0000000..1d3ace0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,119 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+Flexgen structure is a part of Clockgen[1].
+
+Please find an example below:
+
+ Clockgen block diagram
+ -------------------------------------------------------------------
+ | Flexgen stucture |
+ | --------------------------------------------- |
+ | | ------- -------- -------- | |
+clk_sysin | | | | | | | | |
+---|-----------------|-->| | | | | | | |
+ | | | | | | | | | | |
+ | | ------- | | | |Pre | |Final | | |
+ | | |PLL0 | | | | |Dividers| |Dividers| | |
+ | |->| | | | | | x32 | | x32 | | |
+ | | | odf_0|----|-->| | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | ------- | | | | | | | | |
+ | | | | | | | | | | |
+ | | ------- | | Clock | | | | | | |
+ | | |PLL1 | | | | | | | | | |
+ | |->| | | | Cross | | | | | | |
+ | | | odf_0|----|-->| | | | | | CLK_DIV[31:0]
+ | | | | | | Bar |====>| |====>| |===|=========>
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | ------- | | | | | | | | |
+ | | | | | | | | | | |
+ | | ------- | | | | | | | | |
+ | | |QUADFS | | | | | | | | | |
+ | |->| ch0|----|-->| | | | | | | |
+ | | | | | | | | | | | |
+ | | ch1|----|-->| | | | | | | |
+ | | | | | | | | | | | |
+ | | ch2|----|-->| | | DIV | | DIV | | |
+ | | | | | | | 1 to | | 1 to | | |
+ | | ch3|----|-->| | | 1024 | | 64 | | |
+ | ------- | | | | | | | | |
+ | | ------- -------- -------- | |
+ | -------------------------------------------- |
+ | |
+ -------------------------------------------------------------------
+
+This binding uses the common clock binding[2].
+
+[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+ "st,flexgen"
+
+- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
+ outputs).
+
+- clocks : must be set to the parent's phandle. it's could be output clocks of
+ a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
+
+- clock-output-names : List of strings used to name the clock outputs.
+
+Example:
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-proc-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-ext2fa9",
+ "clk-ic-bdisp-0",
+ "clk-ic-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-disp-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phy",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp";
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
