This patch adds Makefile and Kconfig files required for building a
nios2 kernel.
Signed-off-by: Ley Foon Tan <lftan@xxxxxxxxxx>
---
arch/nios2/Kconfig | 199 +++++++++++++++++++++++++++++++++++
arch/nios2/Kconfig.debug | 17 +++
arch/nios2/Makefile | 78 ++++++++++++++
arch/nios2/boot/Makefile | 52 +++++++++
arch/nios2/configs/3c120_defconfig | 76 +++++++++++++
arch/nios2/include/asm/Kbuild | 67 ++++++++++++
arch/nios2/include/uapi/asm/Kbuild | 14 +++
arch/nios2/kernel/Makefile | 24 +++++
arch/nios2/kernel/nios2_ksyms.c | 35 ++++++
arch/nios2/kernel/vmlinux.lds.S | 75 +++++++++++++
arch/nios2/lib/Makefile | 8 ++
arch/nios2/mm/Makefile | 14 +++
arch/nios2/platform/Kconfig.platform | 129 +++++++++++++++++++++++
arch/nios2/platform/Makefile | 1 +
14 files changed, 789 insertions(+)
create mode 100644 arch/nios2/Kconfig
create mode 100644 arch/nios2/Kconfig.debug
create mode 100644 arch/nios2/Makefile
create mode 100644 arch/nios2/boot/Makefile
create mode 100644 arch/nios2/configs/3c120_defconfig
create mode 100644 arch/nios2/include/asm/Kbuild
create mode 100644 arch/nios2/include/uapi/asm/Kbuild
create mode 100644 arch/nios2/kernel/Makefile
create mode 100644 arch/nios2/kernel/nios2_ksyms.c
create mode 100644 arch/nios2/kernel/vmlinux.lds.S
create mode 100644 arch/nios2/lib/Makefile
create mode 100644 arch/nios2/mm/Makefile
create mode 100644 arch/nios2/platform/Kconfig.platform
create mode 100644 arch/nios2/platform/Makefile
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
new file mode 100644
index 0000000..2c8b64d
--- /dev/null
+++ b/arch/nios2/Kconfig
@@ -0,0 +1,199 @@
+config NIOS2
+ def_bool y
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select CLKSRC_OF
+ select GENERIC_ATOMIC64
+ select GENERIC_CPU_DEVICES
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select HAVE_ARCH_TRACEHOOK
+ select IRQ_DOMAIN
+ select MODULES_USE_ELF_RELA
+ select OF
+ select OF_EARLY_FLATTREE
+ select SOC_BUS
+ select USB_ARCH_HAS_HCD if USB_SUPPORT
+
+config GENERIC_CSUM
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config NO_IOPORT_MAP
+ def_bool y
+
+config HAS_DMA
+ def_bool y
+
+config FPU
+ def_bool n
+
+config SWAP
+ def_bool n
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool n
+
+source "init/Kconfig"
+
+menu "Kernel features"
+
+source "kernel/Kconfig.preempt"
+
+source "kernel/Kconfig.freezer"
+
+source "kernel/Kconfig.hz"
+
+source "mm/Kconfig"
+
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ range 9 20
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+endmenu
+
+source "arch/nios2/platform/Kconfig.platform"
+
+menu "Processor type and features"
+
+config MMU
+ def_bool y
+
+config NIOS2_ALIGNMENT_TRAP
+ bool "Catch alignment trap"
+ default y
+ help
+ Nios II CPUs cannot fetch/store data which is not bus aligned,
+ i.e., a 2 or 4 byte fetch must start at an address divisible by
+ 2 or 4. Any non-aligned load/store instructions will be trapped and
+ emulated in software if you say Y here, which has a performance
+ impact.
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+ default y
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ depends on CMDLINE_BOOL
+ help
+ On some platforms, there is currently no way for the boot loader to
+ pass arguments to the kernel. For these platforms, you can supply
+ some command-line options at build time by entering them here. In
+ other cases you can specify kernel args so that you don't have
+ to set them up in board prom initialization routines.
+
+config CMDLINE_FORCE
+ bool "Force default kernel command string"
+ depends on CMDLINE_BOOL
+ help
+ Set this to have arguments from the default kernel command string
+ override those passed by the boot loader.
+
+config NIOS2_CMDLINE_IGNORE_DTB
+ bool "Ignore kernel command string from DTB"
+ depends on !CMDLINE_FORCE
+ default y
+ help
+ Set this to ignore the bootargs property from the devicetree's
+ chosen node and fall back to CMDLINE if nothing is passed.
+
+config NIOS2_PASS_CMDLINE
+ bool "Passed kernel command line from u-boot"
+ default n
+ help
+ Use bootargs env variable from u-boot for kernel command line.
+ will override "Default kernel command string".
+ Say N if you are unsure.
+
+endmenu
+
+menu "Advanced setup"
+
+config ADVANCED_OPTIONS
+ bool "Prompt for advanced kernel configuration options"
+ help
+
+comment "Default settings for advanced configuration options are used"
+ depends on !ADVANCED_OPTIONS
+
+config NIOS2_KERNEL_MMU_REGION_BASE_BOOL
+ bool "Set custom kernel MMU region base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the virtual address of the kernel MMU region.
+
+ Say N here unless you know what you are doing.
+
+config NIOS2_KERNEL_MMU_REGION_BASE
+ hex "Virtual base address of the kernel MMU region " if NIOS2_KERNEL_MMU_REGION_BASE_BOOL
+ default "0x80000000"
+ help
+ This option allows you to set the virtual base address of the kernel MMU region.
+
+config NIOS2_KERNEL_REGION_BASE_BOOL
+ bool "Set custom kernel region base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the virtual address of the kernel region.
+
+ Say N here unless you know what you are doing.
+
+config NIOS2_KERNEL_REGION_BASE
+ hex "Virtual base address of the kernel region " if NIOS2_KERNEL_REGION_BASE_BOOL
+ default "0xc0000000"
+
+config NIOS2_IO_REGION_BASE_BOOL
+ bool "Set custom I/O region base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the virtual address of the I/O region.
+
+ Say N here unless you know what you are doing.
+
+config NIOS2_IO_REGION_BASE
+ hex "Virtual base address of the I/O region" if NIOS2_IO_REGION_BASE_BOOL
+ default "0xe0000000"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/nios2/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/nios2/Kconfig.debug b/arch/nios2/Kconfig.debug
new file mode 100644
index 0000000..8d4e6ba
--- /dev/null
+++ b/arch/nios2/Kconfig.debug
@@ -0,0 +1,17 @@
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool y
+
+source "lib/Kconfig.debug"
+
+config DEBUG_STACK_USAGE
+ bool "Enable stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+endmenu
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
new file mode 100644
index 0000000..62b789a
--- /dev/null
+++ b/arch/nios2/Makefile
@@ -0,0 +1,78 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2013 Altera Corporation
+# Copyright (C) 1994, 95, 96, 2003 by Wind River Systems
+# Written by Fredrik Markstrom
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" cleaning up for this architecture.
+#
+# Nios2 port by Wind River Systems Inc trough:
+# fredrik.markstrom@xxxxxxxxx and ivarholmqvist@xxxxxxxxx
+
+UTS_SYSNAME = Linux
+
+export MMU
+
+cflags-y :=
+LDFLAGS :=
+LDFLAGS_vmlinux :=
+
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+KBUILD_AFLAGS += $(cflags-y)
+KBUILD_CFLAGS += -pipe -D__linux__ -D__ELF__ $(cflags-y)
+KBUILD_CFLAGS += $(if $(CONFIG_NIOS2_HW_MUL_SUPPORT),-mhw-mul,-mno-hw-mul)
+KBUILD_CFLAGS += $(if $(CONFIG_NIOS2_HW_MULX_SUPPORT),-mhw-mulx,-mno-hw-mulx)
+KBUILD_CFLAGS += $(if $(CONFIG_NIOS2_HW_DIV_SUPPORT),-mhw-div,-mno-hw-div)
+KBUILD_CFLAGS += $(if $(CONFIG_NIOS2_FPU_SUPPORT),-mcustom-fpu-cfg=60-1,)
+
+KBUILD_CFLAGS += -fno-optimize-sibling-calls
+KBUILD_CFLAGS += -DUTS_SYSNAME=\"$(UTS_SYSNAME)\"
+KBUILD_CFLAGS += -fno-builtin
+KBUILD_CFLAGS += -G 0
+
+head-y := arch/nios2/kernel/head.o
+libs-y += arch/nios2/lib/ $(LIBGCC)
+core-y += arch/nios2/kernel/ arch/nios2/mm/
+core-y += arch/nios2/platform/
+
+INSTALL_PATH ?= /tftpboot
+boot := arch/$(ARCH)/boot
+BOOT_TARGETS = vmImage zImage
+PHONY += $(BOOT_TARGETS) install
+KBUILD_IMAGE := $(boot)/vmImage
+
+ifneq ($(CONFIG_NIOS2_DTB_SOURCE),"")
+ core-y += $(boot)/
+endif
+
+all: vmImage
+
+archclean:
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+%.dtb:
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+dtbs:
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+$(BOOT_TARGETS): vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+install:
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+
+define archhelp
+ echo '* vmImage - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)'
+ echo ' install - Install kernel using'
+ echo ' (your) ~/bin/$(CROSS_COMPILE)installkernel or'
+ echo ' (distribution) PATH: $(CROSS_COMPILE)installkernel or'
+ echo ' install to $$(INSTALL_PATH)'
+ echo ' dtbs - Build device tree blobs for enabled boards'
+endef
diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
new file mode 100644
index 0000000..35c80e8
--- /dev/null
+++ b/arch/nios2/boot/Makefile
@@ -0,0 +1,52 @@
+#
+# arch/nios2/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+UIMAGE_LOADADDR = $(shell $(NM) vmlinux | awk '$$NF == "_stext" {print $$1}')
+UIMAGE_ENTRYADDR = $(shell $(NM) vmlinux | awk '$$NF == "_start" {print $$1}')
+UIMAGE_COMPRESSION = gzip
+
+OBJCOPYFLAGS_vmlinux.bin := -O binary
+
+targets += vmlinux.bin vmlinux.gz vmImage
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+$(obj)/vmImage: $(obj)/vmlinux.gz
+ $(call if_changed,uimage)
+ @$(kecho) 'Kernel: $@ is ready'
+
+# Rule to build device tree blobs
+DTB_SRC := $(subst ",,$(CONFIG_NIOS2_DTB_SOURCE))
+
+# Make sure the generated dtb gets removed during clean
+extra-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += system.dtb
+
+$(obj)/system.dtb: $(DTB_SRC) FORCE
+ $(call cmd,dtc)
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+obj-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += linked_dtb.o
+
+targets += $(dtb-y)
+
+# Rule to build device tree blobs with make command
+$(obj)/%.dtb: $(src)/dts/%.dts FORCE
+ $(call if_changed_dep,dtc)
+
+$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
+
+clean-files := *.dtb
+
+install:
+ sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/nios2/configs/3c120_defconfig b/arch/nios2/configs/3c120_defconfig
new file mode 100644
index 0000000..a1ede54
--- /dev/null
+++ b/arch/nios2/configs/3c120_defconfig
@@ -0,0 +1,76 @@
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_SHMEM is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_NIOS2_MEM_BASE=0x10000000
+CONFIG_NIOS2_HW_MUL_SUPPORT=y
+CONFIG_NIOS2_HW_DIV_SUPPORT=y
+CONFIG_CUSTOM_CACHE_SETTINGS=y
+CONFIG_NIOS2_DCACHE_SIZE=0x8000
+CONFIG_NIOS2_ICACHE_SIZE=0x8000
+# CONFIG_NIOS2_CMDLINE_IGNORE_DTB is not set
+CONFIG_NIOS2_PASS_CMDLINE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_NETDEVICES=y
+CONFIG_ALTERA_TSE=y
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_ALTERA_JTAGUART=y
+CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
+CONFIG_SERIAL_ALTERA_UART=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
diff --git a/arch/nios2/include/asm/Kbuild b/arch/nios2/include/asm/Kbuild
new file mode 100644
index 0000000..dfe7a79
--- /dev/null
+++ b/arch/nios2/include/asm/Kbuild
@@ -0,0 +1,67 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += ucontext.h
+header-y += traps.h
+
+generic-y += atomic.h
+generic-y += auxvec.h
+generic-y += barrier.h
+generic-y += bitops.h
+generic-y += bitsperlong.h
+generic-y += bug.h
+generic-y += bugs.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += dma.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += exec.h
+generic-y += fb.h
+generic-y += fcntl.h
+generic-y += ftrace.h
+generic-y += futex.h
+generic-y += hardirq.h
+generic-y += hash.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += mcs_spinlock.h
+generic-y += mman.h
+generic-y += module.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += preempt.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += siginfo.h
+generic-y += signal.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += spinlock.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += topology.h
+generic-y += trace_clock.h
+generic-y += types.h
+generic-y += unaligned.h
+generic-y += user.h
+generic-y += xor.h
diff --git a/arch/nios2/include/uapi/asm/Kbuild b/arch/nios2/include/uapi/asm/Kbuild
new file mode 100644
index 0000000..6d9f2e8
--- /dev/null
+++ b/arch/nios2/include/uapi/asm/Kbuild
@@ -0,0 +1,14 @@
+include include/uapi/asm-generic/Kbuild.asm
+
+header-y += byteorder.h
+header-y += elf.h
+header-y += kvm_para.h
+header-y += processor.h
+header-y += ptrace.h
+header-y += setup.h
+header-y += sigcontext.h
+header-y += signal.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += unistd.h
diff --git a/arch/nios2/kernel/Makefile b/arch/nios2/kernel/Makefile
new file mode 100644
index 0000000..8ae7682
--- /dev/null
+++ b/arch/nios2/kernel/Makefile
@@ -0,0 +1,24 @@
+#
+# Makefile for the nios2 linux kernel.
+#
+
+extra-y += head.o
+extra-y += vmlinux.lds
+
+obj-y += cpuinfo.o
+obj-y += entry.o
+obj-y += insnemu.o
+obj-y += irq.o
+obj-y += nios2_ksyms.o
+obj-y += process.o
+obj-y += prom.o
+obj-y += ptrace.o
+obj-y += setup.o
+obj-y += signal.o
+obj-y += sys_nios2.o
+obj-y += syscall_table.o
+obj-y += time.o
+obj-y += traps.o
+
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_NIOS2_ALIGNMENT_TRAP) += misaligned.o
diff --git a/arch/nios2/kernel/nios2_ksyms.c b/arch/nios2/kernel/nios2_ksyms.c
new file mode 100644
index 0000000..eaf7f0c
--- /dev/null
+++ b/arch/nios2/kernel/nios2_ksyms.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/string.h>
+
+/* string functions */
+
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memmove);
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+#define DECLARE_EXPORT(name) extern void name(void); EXPORT_SYMBOL(name)
+
+DECLARE_EXPORT(__gcc_bcmp);
+DECLARE_EXPORT(__divdi3);
+DECLARE_EXPORT(__divsi3);
+DECLARE_EXPORT(__moddi3);
+DECLARE_EXPORT(__modsi3);
+DECLARE_EXPORT(__udivdi3);
+DECLARE_EXPORT(__udivmoddi4);
+DECLARE_EXPORT(__udivsi3);
+DECLARE_EXPORT(__umoddi3);
+DECLARE_EXPORT(__umodsi3);
+DECLARE_EXPORT(__muldi3);
diff --git a/arch/nios2/kernel/vmlinux.lds.S b/arch/nios2/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..326fab4
--- /dev/null
+++ b/arch/nios2/kernel/vmlinux.lds.S
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2009 Thomas Chou <thomas@xxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <asm/page.h>
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+
+OUTPUT_FORMAT("elf32-littlenios2", "elf32-littlenios2", "elf32-littlenios2")
+
+OUTPUT_ARCH(nios)
+ENTRY(_start) /* Defined in head.S */
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+ . = CONFIG_NIOS2_MEM_BASE | CONFIG_NIOS2_KERNEL_REGION_BASE;
+
+ _text = .;
+ _stext = .;
+ HEAD_TEXT_SECTION
+ .text : {
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ IRQENTRY_TEXT
+ KPROBES_TEXT
+ } =0
+ _etext = .;
+
+ .got : {
+ *(.got.plt)
+ *(.igot.plt)
+ *(.got)
+ *(.igot)
+ }
+
+ EXCEPTION_TABLE(L1_CACHE_BYTES)
+
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(PAGE_SIZE)
+ PERCPU_SECTION(L1_CACHE_BYTES)
+ __init_end = .;
+
+ _sdata = .;
+ RO_DATA_SECTION(PAGE_SIZE)
+ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
+
+ BSS_SECTION(0, 0, 0)
+ _end = .;
+
+ STABS_DEBUG
+ DWARF_DEBUG
+ NOTES
+
+ DISCARDS
+}
diff --git a/arch/nios2/lib/Makefile b/arch/nios2/lib/Makefile
new file mode 100644
index 0000000..174aa54
--- /dev/null
+++ b/arch/nios2/lib/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Nios2-specific library files.
+#
+
+lib-y += io.o
+lib-y += memcpy.o
+lib-y += memmove.o
+lib-y += memset.o
diff --git a/arch/nios2/mm/Makefile b/arch/nios2/mm/Makefile
new file mode 100644
index 0000000..3cbd084
--- /dev/null
+++ b/arch/nios2/mm/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the Nios2-specific parts of the memory manager.
+#
+
+obj-y += cacheflush.o
+obj-y += dma-mapping.o
+obj-y += extable.o
+obj-y += fault.o
+obj-y += init.o
+obj-y += ioremap.o
+obj-y += mmu_context.o
+obj-y += pgtable.o
+obj-y += tlb.o
+obj-y += uaccess.o
diff --git a/arch/nios2/platform/Kconfig.platform b/arch/nios2/platform/Kconfig.platform
new file mode 100644
index 0000000..a2c5cc8
--- /dev/null
+++ b/arch/nios2/platform/Kconfig.platform
@@ -0,0 +1,129 @@
+menu "Platform options"
+
+comment "Memory settings"
+
+config NIOS2_MEM_BASE
+ hex "Memory base address"
+ default "0x00000000"
+ help
+ This is the physical address of the memory that the kernel will run
+ from. This address is used to link the kernel and setup initial memory
+ management. You should take the raw memory address without any MMU
+ or cache bits set.
+ Please not that this address is used directly so you have to manually
+ do address translation if it's connected to a bridge.
+
+comment "Device tree"
+
+config NIOS2_DTB_AT_PHYS_ADDR
+ bool "DTB at physical address"
+ default n
+ help
+ When enabled you can select a physical address to load the dtb from.
+ Normally this address is passed by a bootloader such as u-boot but
+ using this you can use a devicetree without a bootloader.
+ This way you can store a devicetree in NOR flash or an onchip rom.
+ Please note that this addres is used directly so you have to manually
+ do address translation if it's connected to a bridge. Also take into
+ account that when using an MMU you'd have to ad 0xC0000000 to your
+ address
+
+config NIOS2_DTB_PHYS_ADDR
+ hex "DTB Address"
+ depends on NIOS2_DTB_AT_PHYS_ADDR
+ default "0xC0000000"
+ help
+ Physical address of a dtb blob.
+
+config NIOS2_DTB_SOURCE_BOOL
+ bool "Compile and link device tree into kernel image"
+ default n
+ help
+ This allows you to specify a dts (device tree source) file
+ which will be compiled and linked into the kernel image.
+
+config NIOS2_DTB_SOURCE
+ string "Device tree source file"
+ depends on NIOS2_DTB_SOURCE_BOOL
+ default ""
+ help
+ Absolute path to the device tree source (dts) file describing your
+ system.
+
+comment "Nios II instructions"
+
+config NIOS2_HW_MUL_SUPPORT
+ bool "Enable MUL instruction"
+ default n
+ help
+ Set to true if you configured the Nios II to include the MUL
+ instruction. This will enable the -mhw-mul compiler flag.
+
+config NIOS2_HW_MULX_SUPPORT
+ bool "Enable MULX instruction"
+ default n
+ help
+ Set to true if you configured the Nios II to include the MULX
+ instruction. Enables the -mhw-mulx compiler flag.
+
+config NIOS2_HW_DIV_SUPPORT
+ bool "Enable DIV instruction"
+ default n
+ help
+ Set to true if you configured the Nios II to include the DIV
+ instruction. Enables the -mhw-div compiler flag.
+
+config NIOS2_FPU_SUPPORT
+ bool "Custom floating point instr support"
+ default n
+ help
+ Enables the -mcustom-fpu-cfg=60-1 compiler flag.
+
+config NIOS2_CI_SWAB_SUPPORT
+ bool "Byteswap custom instruction"
+ default n
+ help
+ Use the byteswap (endian convertor) Nios II custom instruction provided
+ by Altera and which can be enabled in QSYS builder. This accelerates
+ endian conversions in the kernel (e.g. ntohs).
+
+config NIOS2_CI_SWAB_NO
+ int "Byteswap custom instruction number" if NIOS2_CI_SWAB_SUPPORT
+ default 0
+ help
+ Number of the instruction as configured in QSYS Builder.
+
+comment "Cache settings"
+
+config CUSTOM_CACHE_SETTINGS
+ bool "Custom cache settings"
+ help
+ This option allows you to tweak the cache settings used during early
+ boot (where the information from device tree is not yet available).
+ There should be no reason to change these values. Linux will work
+ perfectly fine, even if the Nios II is configured with smaller caches.
+
+ Say N here unless you know what you are doing.
+
+config NIOS2_DCACHE_SIZE
+ hex "D-Cache size" if CUSTOM_CACHE_SETTINGS
+ range 0x200 0x10000
+ default "0x800"
+ help
+ Maximum possible data cache size.
+
+config NIOS2_DCACHE_LINE_SIZE
+ hex "D-Cache line size" if CUSTOM_CACHE_SETTINGS
+ range 0x10 0x20
+ default "0x20"
+ help
+ Minimum possible data cache line size.
+
+config NIOS2_ICACHE_SIZE
+ hex "I-Cache size" if CUSTOM_CACHE_SETTINGS
+ range 0x200 0x10000
+ default "0x1000"
+ help
+ Maximum possible instruction cache size.
+
+endmenu
diff --git a/arch/nios2/platform/Makefile b/arch/nios2/platform/Makefile
new file mode 100644
index 0000000..46364f1
--- /dev/null
+++ b/arch/nios2/platform/Makefile
@@ -0,0 +1 @@
+obj-y += platform.o
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
