On Mon, Jul 14, 2014 at 03:23:08PM -0500, Aravind Gopalakrishnan wrote:
> This patch adds temperature monitoring support for F15h M60h processor.
> - Add new pci device id for the relevant processor
> - The functionality of REG_REPORTED_TEMPERATURE is moved to
> D0F0xBC_xD820_0CA4 [Reported Temperature Control]
> - So, use this to get CUR_TEMP value
> - Add Kconfig, Doc entries to indicate support for this processor.
>
> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@xxxxxxx>
> ---
> Documentation/hwmon/k10temp | 2 +-
> drivers/hwmon/Kconfig | 4 ++--
> drivers/hwmon/k10temp.c | 22 ++++++++++++++++++++--
> include/linux/pci_ids.h | 1 +
> 4 files changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
> index ee6d30e..254d2f5 100644
> --- a/Documentation/hwmon/k10temp
> +++ b/Documentation/hwmon/k10temp
> @@ -11,7 +11,7 @@ Supported chips:
> Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
> * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
> * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
> -* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri"
> +* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo"
> * AMD Family 16h processors: "Kabini", "Mullins"
>
> Prefix: 'k10temp'
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 02d3d85..57ba400 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -280,8 +280,8 @@ config SENSORS_K10TEMP
> If you say yes here you get support for the temperature
> sensor(s) inside your CPU. Supported are later revisions of
> the AMD Family 10h and all revisions of the AMD Family 11h,
> - 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri) and
> - 16h (Kabini/Mullins) microarchitectures.
> + 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
> + and 16h (Kabini/Mullins) microarchitectures.
>
> This driver can also be built as a module. If so, the module
> will be called k10temp.
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index f7b46f6..5da872f 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -51,13 +51,30 @@ MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
> #define REG_NORTHBRIDGE_CAPABILITIES 0xe8
> #define NB_CAP_HTC 0x00000400
>
> +/*
> + * For F15h M60h, functionality of REG_REPORTED_TEMPERATURE
> + * has been moved to D0F0xBC_xD820_0CA4 [Reported Temperature
> + * Control]
> + */
> +#define NB_SMU_IND_ADDR 0xb8
> +#define NB_SMU_IND_DATA 0xbc
> +#define IND_ADDR_OFFSET 0xd8200ca4
> +
> static ssize_t show_temp(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> u32 regval;
> + struct pci_dev *pdev = to_pci_dev(dev);
> +
> + if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model == 0x60) {
> + pci_bus_write_config_dword(pdev->bus, PCI_DEVFN(0, 0),
> + NB_SMU_IND_ADDR, IND_ADDR_OFFSET);
> + pci_bus_read_config_dword(pdev->bus, PCI_DEVFN(0, 0),
> + NB_SMU_IND_DATA, ®val);
> +
> + } else
> + pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, ®val);
>
> - pci_read_config_dword(to_pci_dev(dev),
> - REG_REPORTED_TEMPERATURE, ®val);
> return sprintf(buf, "%u\n", (regval >> 21) * 125);
> }
>
> @@ -211,6 +228,7 @@ static const struct pci_device_id k10temp_id_table[] = {
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
> + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
> {}
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 7fa3173..3c8e328 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -520,6 +520,7 @@
> #define PCI_DEVICE_ID_AMD_15H_M10H_F3 0x1403
> #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F3 0x141d
> #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F4 0x141e
> +#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F3 0x1573
I'm assuming this is used somewhere else besides k10temp.c?
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
