Add bindings documentation for Zynq QSPI driver.
Signed-off-by: Harini Katakam <harinik@xxxxxxxxxx>
---
.../devicetree/bindings/spi/spi-zynq-qspi.txt | 28 ++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
new file mode 100644
index 0000000..288c551
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
@@ -0,0 +1,28 @@
+Xilinx Zynq QSPI controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible : Should be "xlnx,zynq-qspi-1.0".
+- reg : Physical base address and size of QSPI registers map.
+- interrupts : Property with a value describing the interrupt
+ number.
+- interrupt-parent : Must be core interrupt controller
+- clock-names : List of input clock names - "ref_clk", "pclk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs : Number of chip selects used.
+- xlnx,qspi-mode : Single - 0; Dual Stacked - 1; Dual Parallel - 2.
+
+Example:
+ qspi@e000d000 {
+ compatible = "xlnx,zynq-qspi-1.0";
+ clock-names = "ref_clk", "pclk";
+ clocks = <&clkc 10>, <&clkc 43>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 19 4>;
+ num-cs = <1>;
+ xlnx,qspi-mode = <0x0>;
+ reg = <0xe000d000 0x1000>;
+ } ;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
