[PATCH v2 2/2] extcon: gpio: Add dt support for the driver.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device tree support to extcon-gpio driver.
Add devicetree binding documentation

Signed-off-by: George Cherian <george.cherian@xxxxxx>
---
 .../devicetree/bindings/extcon/extcon-gpio.txt     | 21 ++++++++++++++++
 drivers/extcon/extcon-gpio.c                       | 28 ++++++++++++++++++++++
 2 files changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt

diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
new file mode 100644
index 0000000..1c12957
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
@@ -0,0 +1,21 @@
+GPIO based EXTCON
+
+EXTCON GPIO
+-----------
+
+Required Properties:
+ - compatible: should be:
+   * "ti,extcon-gpio"
+ - gpios: specifies the gpio pin used.
+ - debounce: Debounce time for GPIO IRQ in ms
+ - irq-flags: IRQ flag to be used ( eg: IRQ_TYPE_EDGE_FALLING)
+
+
+Eg:
+
+        extcon1: am43_usbid_extcon1 {
+                compatible = "ti,extcon-gpio";
+                gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+                debounce = <20>;
+                irq-flags = <IRQ_TYPE_EDGE_FALLING>;
+        };
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 6c268b4..e5e2cba 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
@@ -83,12 +84,33 @@ static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
 
 static int gpio_extcon_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct gpio_extcon_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct gpio_extcon_data *extcon_data;
 	int ret;
 
+	if (np) {
+		enum of_gpio_flags flags;
+
+		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		pdata->gpio = of_get_gpio(np, 0);
+		if (!gpio_is_valid(pdata->gpio))
+			return -EPROBE_DEFER;
+
+		pdata->name = np->name;
+		ret = of_get_gpio_flags(np, 0, &flags);
+		pdata->gpio_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+		of_property_read_u32(np, "debounce", (u32 *)&pdata->debounce);
+		of_property_read_u32(np, "irq-flags", (u32 *)&pdata->irq_flags);
+	}
+
 	if (!pdata)
 		return -EBUSY;
+
 	if (!pdata->irq_flags) {
 		dev_err(&pdev->dev, "IRQ flag is not specified.\n");
 		return -EINVAL;
@@ -177,6 +199,11 @@ static int gpio_extcon_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
 
+static struct of_device_id of_extcon_gpio_match_tbl[] = {
+	{ .compatible = "ti,extcon-gpio", },
+	{ /* end */ }
+};
+
 static struct platform_driver gpio_extcon_driver = {
 	.probe		= gpio_extcon_probe,
 	.remove		= gpio_extcon_remove,
@@ -184,6 +211,7 @@ static struct platform_driver gpio_extcon_driver = {
 		.name	= "extcon-gpio",
 		.owner	= THIS_MODULE,
 		.pm	= &gpio_extcon_pm_ops,
+		.of_match_table = of_extcon_gpio_match_tbl,
 	},
 };
 
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux