> -----Original Message----- > From: Beniamino Galvani [mailto:b.galvani@xxxxxxxxx] > Sent: Sunday, June 22, 2014 11:32 PM > To: Liam Girdwood; Mark Brown > Cc: Yang, Wenyou; Rob Herring; Pawel Moll; Mark Rutland; Ian Campbell; > Kumar Gala; Heiko Stuebner; devicetree@xxxxxxxxxxxxxxx; linux- > doc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; Beniamino Galvani > Subject: [PATCH 1/5] regulator: act8865: fix parsing of platform data > > The driver loops through all available regulators (ACT8865_REG_NUM) and > accesses pdata->regulators[i].platform_data without checking the actual > value of num_regulators in platform data, potentially causing a invalid > memory access. > > Fix this and look up the regulator init_data by id in platform data. > > Signed-off-by: Beniamino Galvani <b.galvani@xxxxxxxxx> > --- > drivers/regulator/act8865-regulator.c | 29 +++++++++++++++++++++---- > ---- > 1 file changed, 21 insertions(+), 8 deletions(-) > > diff --git a/drivers/regulator/act8865-regulator.c > b/drivers/regulator/act8865-regulator.c > index b92d7dd..fe2c038 100644 > --- a/drivers/regulator/act8865-regulator.c > +++ b/drivers/regulator/act8865-regulator.c > @@ -252,6 +252,22 @@ static inline int act8865_pdata_from_dt(struct > device *dev, } #endif > > +static struct regulator_init_data > +*act8865_get_init_data(int id, struct act8865_platform_data *pdata) { > + int i; > + > + if (!pdata) > + return NULL; > + > + for (i = 0; i < pdata->num_regulators; i++) { > + if (pdata->regulators[i].id == id) > + return pdata->regulators[i].platform_data; > + } > + > + return NULL; > +} > + > static int act8865_pmic_probe(struct i2c_client *client, > const struct i2c_device_id *i2c_id) { @@ -261,7 > +277,7 @@ static int act8865_pmic_probe(struct i2c_client *client, > struct regulator_config config = { }; > struct act8865 *act8865; > struct device_node *of_node[ACT8865_REG_NUM]; > - int i, id; > + int i; > int ret = -EINVAL; > int error; > > @@ -299,20 +315,17 @@ static int act8865_pmic_probe(struct i2c_client > *client, > > /* Finally register devices */ > for (i = 0; i < ACT8865_REG_NUM; i++) { > - > - id = pdata->regulators[i].id; > + const struct regulator_desc *desc = &act8865_reg[i]; > > config.dev = dev; > - config.init_data = pdata->regulators[i].platform_data; > + config.init_data = act8865_get_init_data(desc->id, pdata); > config.of_node = of_node[i]; > config.driver_data = act8865; > config.regmap = act8865->regmap; > > - rdev = devm_regulator_register(&client->dev, > &act8865_reg[i], > - &config); > + rdev = devm_regulator_register(&client->dev, desc, &config); > if (IS_ERR(rdev)) { > - dev_err(dev, "failed to register %s\n", > - act8865_reg[id].name); > + dev_err(dev, "failed to register %s\n", desc->name); > return PTR_ERR(rdev); > } > } > -- > 1.7.10.4 Tested on at91-sama5d3_xplained with ACT8865 Tested-by Wenyou.Yang <wenyou.yang@xxxxxxxxx> Best Regards, Wenyou Yang -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
