Re: [PATCH v2 7/7] ARM: at91/dt: enable the LCD panel on sama5d3xek boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Boris,

On 06/10/2014 12:04 AM, Boris BREZILLON wrote:
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index cbd6a3f..f2ab41d 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -36,9 +36,33 @@
  			macb0: ethernet@f0028000 {
  				status = "okay";
  			};
+
+			hlcdc: hlcdc@f0030000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					atmel,panel = <&panel 3 0>;

One question here, in the driver code, it will configuration the frame buffer mode depends on this parameter. So, my question is if the framebuffer bits per pixel is different with output bits per pixel, how to setting it?

For example, frame buffer use 16 bits/pixel, while output 24 bits/pixel.

+				};
+			};
  		};
  	};


Best Regards,
Bo Shen
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux