Assign USB ports previously owned by the EHCI controllers to the XHCI
controller. There is a mini-PCIe USB port (UTMI port 1) and a USB A
connector (UTMI port 2, USB3 port 0). PCIe lane 0 is used for USB3
port 0.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 43 ++++++++++++++++---------------
1 file changed, 22 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 11c1650..cea2d2b 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1619,15 +1619,35 @@
nvidia,sys-clock-req-active-high;
};
+ usb@0,70090000 {
+ status = "okay";
+ phys = <&padctl TEGRA_XUSB_PADCTL_UTMI_P1>, /* mini-PCIe USB */
+ <&padctl TEGRA_XUSB_PADCTL_UTMI_P2>, /* USB A */
+ <&padctl TEGRA_XUSB_PADCTL_USB3_P0>; /* USB A */
+ phy-names = "utmi-1", "utmi-2", "usb3-0";
+ s1p05v-supply = <&vdd_1v05_run>;
+ s3p3v-supply = <&vdd_3v3_lp0>;
+ s1p8v-supply = <&vddio_1v8>;
+ };
+
padctl@0,7009f000 {
pinctrl-0 = <&padctl_default>;
pinctrl-names = "default";
+ vbus-otg-2-supply = <&vdd_usb3_vbus>;
+
padctl_default: pinmux {
- usb3 {
- nvidia,lanes = "pcie-0", "pcie-1";
+ otg {
+ nvidia,lanes = "otg-1", "otg-2";
+ nvidia,function = "xusb";
+ };
+
+ usb3p0 {
+ nvidia,lanes = "pcie-0";
nvidia,function = "usb3";
nvidia,iddq = <0>;
+ nvidia,usb3-port-num = <0>;
+ nvidia,usb2-port-num = <2>;
};
pcie {
@@ -1668,25 +1688,6 @@
};
};
- /* mini-PCIe USB */
- usb@0,7d004000 {
- status = "okay";
- };
-
- usb-phy@0,7d004000 {
- status = "okay";
- };
-
- /* USB A connector */
- usb@0,7d008000 {
- status = "okay";
- };
-
- usb-phy@0,7d008000 {
- status = "okay";
- vbus-supply = <&vdd_usb3_vbus>;
- };
-
clocks {
compatible = "simple-bus";
#address-cells = <1>;
--
2.0.0.526.g5318336
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
