Re: [PATCH v2 1/7] mfd: add atmel-hlcdc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/09/2014 06:04 PM, Boris BREZILLON wrote:
> The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
> family or sama5d3 family) exposes 2 subdevices:
> - a display controller (controlled by a DRM driver)
> - a PWM chip
> 
> Add support for the MFD device which will just retrieve HLCDC clocks and
> create a regmap so that subdevices can access the HLCDC register range
> concurrently.
> 
> Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/atmel-hlcdc.txt        |  41 ++++++++
>  drivers/mfd/Kconfig                                |  11 ++
>  drivers/mfd/Makefile                               |   1 +
>  drivers/mfd/atmel-hlcdc.c                          | 116 +++++++++++++++++++++
>  include/linux/mfd/atmel-hlcdc.h                    |  78 ++++++++++++++
>  5 files changed, 247 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
>  create mode 100644 drivers/mfd/atmel-hlcdc.c
>  create mode 100644 include/linux/mfd/atmel-hlcdc.h
> 
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
> new file mode 100644
> index 0000000..f5b69cb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
> @@ -0,0 +1,41 @@
> +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
> +
> +Required properties:
> + - compatible: value should be one of the following:
> +   "atmel,sama5d3-hlcdc"
> + - reg: base address and size of the HLCDC device registers.
> + - clock-names: the name of the 3 clocks requested by the HLCDC device.
> +   Should contain "periph_clk", "sys_clk" and "slow_clk".
> + - clocks: should contain the 3 clocks requested by the HLCDC device.
> +
> +The HLCDC IP exposes two subdevices:
> + - a PWM chip: see Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
> + - a Display Controller: see Documentation/devicetree/bindings/drm/atmel-hlcdc-dc.txt
> +
> +Example:
> +
> +	hlcdc: hlcdc@f0030000 {
> +		compatible = "atmel,sama5d3-hlcdc";
> +		reg = <0xf0030000 0x2000>;
> +		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
> +		clock-names = "periph_clk","sys_clk", "slow_clk";
> +		status = "disabled";
> +
> +		hlcdc-display-controller {
> +			compatible = "atmel,hlcdc-dc";
> +			interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
> +			pinctrl-names = "default", "rgb-444", "rgb-565", "rgb-666", "rgb-888";
> +			pinctrl-0 = <&pinctrl_lcd_base>;
> +			pinctrl-1 = <&pinctrl_lcd_base &pinctrl_lcd_rgb444>;
> +			pinctrl-2 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
> +			pinctrl-3 = <&pinctrl_lcd_base &pinctrl_lcd_rgb666>;
> +			pinctrl-4 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
> +		};
> +
> +		hlcdc_pwm: hlcdc-pwm {
> +			compatible = "atmel,hlcdc-pwm";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_lcd_pwm>;
> +			#pwm-cells = <3>;
> +		};
> +	};
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ee8204c..82777f6 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -59,6 +59,17 @@ config MFD_AAT2870_CORE
>  	  additional drivers must be enabled in order to use the
>  	  functionality of the device.
>  
> +config MFD_ATMEL_HLCDC
> +	tristate "Atmel HLCDC (High LCD Controller)"
> +	select MFD_CORE
> +	select REGMAP_MMIO
> +	help
> +	  Choose this option if you have an ATMEL SoC with an HLCDC (High
> +	  LCD Controller) IP (i.e. at91sam9n12, at91sam9x5 family or sama5d3
> +	  family).
> +	  This MFD device exposes two subdevices: a PWM chip and a Display
> +	  Controller.
> +
>  config MFD_BCM590XX
>  	tristate "Broadcom BCM590xx PMUs"
>  	select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 8afedba..5f25b0d 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -156,6 +156,7 @@ obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o ssbi.o
>  obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
>  obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
>  obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
> +obj-$(CONFIG_MFD_ATMEL_HLCDC)	+= atmel-hlcdc.o
>  obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
>  obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
>  obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
> diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
> new file mode 100644
> index 0000000..e4636e8
> --- /dev/null
> +++ b/drivers/mfd/atmel-hlcdc.c
> @@ -0,0 +1,116 @@
> +/*
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/mfd/atmel-hlcdc.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +static const struct mfd_cell atmel_hlcdc_cells[] = {
> +	{
> +		.name = "atmel-hlcdc-pwm",
> +		.of_compatible = "atmel,hlcdc-pwm",
> +	},
> +	{
> +		.name = "atmel-hlcdc-dc",
> +		.of_compatible = "atmel,hlcdc-dc",
> +	},
> +};
> +
> +static int atmel_hlcdc_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct regmap_config config;
> +	struct atmel_hlcdc *hlcdc;
> +	struct resource *res;
> +	void __iomem *regs;
> +
> +	hlcdc = devm_kzalloc(dev, sizeof(*hlcdc), GFP_KERNEL);
> +	if (!hlcdc)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	regs = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(regs))
> +		return PTR_ERR(regs);
> +
> +	hlcdc->periph_clk = devm_clk_get(dev, "periph_clk");
> +	if (IS_ERR(hlcdc->periph_clk)) {
> +		dev_err(dev, "failed to get functional clock\n");
> +		return PTR_ERR(hlcdc->periph_clk);
> +	}
> +
> +	hlcdc->sys_clk = devm_clk_get(dev, "sys_clk");
> +	if (IS_ERR(hlcdc->sys_clk)) {
> +		dev_err(dev, "failed to get functional clock\n");
> +		return PTR_ERR(hlcdc->sys_clk);
> +	}
> +
> +	hlcdc->slow_clk = devm_clk_get(dev, "slow_clk");
> +	if (IS_ERR(hlcdc->slow_clk)) {
> +		dev_err(dev, "failed to get slow clock\n");
> +		return PTR_ERR(hlcdc->slow_clk);
> +	}
> +
> +	memset(&config, 0, sizeof(config));
> +	config.reg_bits = 32;
> +	config.val_bits = 32;
> +	config.reg_stride = 4;
> +	config.max_register = (resource_size(res) / 4) - 1;
> +	hlcdc->regmap = devm_regmap_init_mmio_clk(dev, "periph_clk", regs,
> +						  &config);
I don't think it's necessary to use "periph_clk" here. This clock will
always be running because the HLCDC needs it to work (it's not just an
interface clock). In the end it's just some extra work for each register
access.
> +	if (IS_ERR(hlcdc->regmap))
> +		return PTR_ERR(hlcdc->regmap);
> +
> +	dev_set_drvdata(dev, hlcdc);
> +
> +	return mfd_add_devices(dev, -1, atmel_hlcdc_cells,
> +			       ARRAY_SIZE(atmel_hlcdc_cells),
> +			       NULL, 0, NULL);
> +}
> +
> +static int atmel_hlcdc_remove(struct platform_device *pdev)
> +{
> +	mfd_remove_devices(&pdev->dev);
> +
> +	dev_set_drvdata(&pdev->dev, NULL);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id atmel_hlcdc_match[] = {
> +	{ .compatible = "atmel,sama5d3-hlcdc" },
> +	{ },
> +};
> +
> +static struct platform_driver atmel_hlcdc_driver = {
> +	.probe = atmel_hlcdc_probe,
> +	.remove = atmel_hlcdc_remove,
> +	.driver = {
> +		.name = "atmel-hlcdc",
> +		.owner = THIS_MODULE,
> +		.of_match_table = atmel_hlcdc_match,
> +	},
> +};
> +module_platform_driver(atmel_hlcdc_driver);
> +
> +MODULE_ALIAS("platform:atmel-hlcdc");
> +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Atmel HLCDC driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/atmel-hlcdc.h b/include/linux/mfd/atmel-hlcdc.h
> new file mode 100644
> index 0000000..d7a5589
> --- /dev/null
> +++ b/include/linux/mfd/atmel-hlcdc.h
> @@ -0,0 +1,78 @@
> +/*
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __LINUX_MFD_HLCDC_H
> +#define __LINUX_MFD_HLCDC_H
> +
> +#include <linux/clk.h>
> +#include <linux/regmap.h>
> +
> +#define ATMEL_HLCDC_CFG(i)		((i) * 0x4)
> +#define ATMEL_HLCDC_SIG_CFG		LCDCFG(5)
> +#define		ATMEL_HLCDC_HSPOL		BIT(0)
> +#define		ATMEL_HLCDC_VSPOL		BIT(1)
> +#define		ATMEL_HLCDC_VSPDLYS		BIT(2)
> +#define		ATMEL_HLCDC_VSPDLYE		BIT(3)
> +#define		ATMEL_HLCDC_DISPPOL		BIT(4)
> +#define		ATMEL_HLCDC_DITHER		BIT(6)
> +#define		ATMEL_HLCDC_DISPDLY		BIT(7)
> +#define		ATMEL_HLCDC_MODE_MASK		0x300
> +#define		ATMEL_HLCDC_PP			BIT(10)
> +#define		ATMEL_HLCDC_VSPSU		BIT(12)
> +#define		ATMEL_HLCDC_VSPHO		BIT(13)
> +#define		ATMEL_HLCDC_GUARDTIME_MASK	0x1f0000
> +
> +#define ATMEL_HLCDC_EN			0x20
> +#define ATMEL_HLCDC_DIS			0x24
> +#define ATMEL_HLCDC_SR			0x28
> +#define ATMEL_HLCDC_IER			0x2c
> +#define ATMEL_HLCDC_IDR			0x30
> +#define ATMEL_HLCDC_IMR			0x34
> +#define ATMEL_HLCDC_ISR			0x38
> +
> +#define ATMEL_HLCDC_CLKPOL		BIT(0)
> +#define ATMEL_HLCDC_CLKSEL		BIT(2)
> +#define ATMEL_HLCDC_CLKPWMSEL		BIT(3)
> +#define ATMEL_HLCDC_CGDIS(i)		BIT(8 + (i))
> +#define ATMEL_HLCDC_CLKDIV_SHFT		16
> +#define ATMEL_HLCDC_CLKDIV_MASK		(0xff << ATMEL_HLCDC_CLKDIV_SHFT)
> +#define ATMEL_HLCDC_CLKDIV(div)		((div - 2) << ATMEL_HLCDC_CLKDIV_SHFT)
> +
> +#define ATMEL_HLCDC_PIXEL_CLK		BIT(0)
> +#define ATMEL_HLCDC_SYNC		BIT(1)
> +#define ATMEL_HLCDC_DISP		BIT(2)
> +#define ATMEL_HLCDC_PWM			BIT(3)
> +#define ATMEL_HLCDC_SIP			BIT(4)
> +
> +/**
> + * Structure shared by the MFD device and its subdevices.
> + *
> + * @regmap: register map used to access HLCDC IP registers
> + * @periph_clk: the hlcdc peripheral clock
> + * @sys_clk: the hlcdc system clock
> + * @slow_clk: the system slow clk
> + */
> +struct atmel_hlcdc {
> +	struct regmap *regmap;
> +	struct clk *periph_clk;
> +	struct clk *sys_clk;
> +	struct clk *slow_clk;
> +};
> +
> +#endif /* __LINUX_MFD_HLCDC_H */
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux