Re: [PATCH RESEND] devicetree: bindings: separate CPU enable method descriptions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 03, 2014 at 02:48:18PM +0100, Alex Elder wrote:
> On 06/03/2014 05:08 AM, Mark Rutland wrote:
> > Hi Alex,
> >
> > On Fri, May 30, 2014 at 11:11:54PM +0100, Alex Elder wrote:
> >> The bindings for CPU enable methods are defined in ".../arm/cpus.txt".  As
> >> additional 32-bit ARM CPUS are converted to use the "enable-method" CPU
> >> property to imply a particular set of SMP operations to use, the list of these
> >> methods is likely to become unwieldy.  The current documentation already
> >> contains several property descriptions that are meaningful only for certain
> >> enable methods.
> >>
> >> This patch defines a new Documentation subdirectory whose purpose is to give
> >> each CPU enable method its own place to define how and when it's used, as
> >> well as what other properties (optional or required) are associated with
> >> the method.  The existing enable method documentation is expanded and moved
> >> from ".../arm/cpus.txt" into new files accordingly.
> >>
> >> Signed-off-by: Alex Elder <elder@xxxxxxxxxx>
> >> ---
> >> v2:  Rename "arm,psci.txt" to be "psci.txt" and fix its content
> >>
> >>  .../bindings/arm/cpu-enable-method/README          | 20 +++++
> >>  .../bindings/arm/cpu-enable-method/psci.txt        | 45 ++++++++++
> >>  .../arm/cpu-enable-method/qcom,gcc-msm8660         | 30 +++++++
> >>  .../arm/cpu-enable-method/qcom,kpss-acc-v1         | 56 +++++++++++++
> >>  .../arm/cpu-enable-method/qcom,kpss-acc-v2         | 56 +++++++++++++
> >>  .../bindings/arm/cpu-enable-method/spin-table.txt  | 95 ++++++++++++++++++++++
> >>  Documentation/devicetree/bindings/arm/cpus.txt     | 29 +------
> >>  7 files changed, 305 insertions(+), 26 deletions(-)
> >>  create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/README
> >>  create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/psci.txt
> >>  create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/qcom,gcc-msm8660
> >>  create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/qcom,kpss-acc-v1
> >>  create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/qcom,kpss-acc-v2
> >>  create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/spin-table.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/README b/Documentation/devicetree/bindings/arm/cpu-enable-method/README
> >> new file mode 100644
> >> index 0000000..cc9431e
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/README
> >> @@ -0,0 +1,20 @@
> >> +==========================
> >> +CPU enable-method bindings
> >> +==========================
> >> +
> >> +The device tree describes the layout of CPUs in a machine in a single "cpus"
> >> +node, which in turn contains a number of "cpu" sub-nodes defining properties
> >> +for each cpu.
> >> +
> >> +For multiprocessing configurations, CPU cores can be individually enabled
> >> +and disabled.  The enabling capability is used for SMP startup as well as
> >> +CPU hotplug.  A CPU enable method--normally specified in the device tree
> >> +using an "enable-method" property--defines how cores are enabled.  If all
> >> +CPUs in a machine use the same enable method and related property values,
> >> +these properties should be defined in the "cpus" node, which associates the
> >> +property values with all CPUs.  Alternatively, every "cpu" node can define
> >> +its "enable-method" separately.
> >> +
> >> +Documents in this directory define how each of the CPU enable methods are to
> >> +be used, as well the names and possible values of related properties that
> >> +are required by or affect each enable method.
> >> diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/psci.txt b/Documentation/devicetree/bindings/arm/cpu-enable-method/psci.txt
> >> new file mode 100644
> >> index 0000000..68b26c2
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/psci.txt
> >> @@ -0,0 +1,45 @@
> >> +================================
> >> +CPU enable-method "psci" binding
> >> +================================
> >> +
> >> +This document describes the "psci" method for enabling secondary CPUs.  A
> >> +"psci" enable method is supported only in individual "cpu" nodes (even if
> >> +       all CPU cores use the "psci" enable method).
> >> +
> >> +Enable method name:    "psci"
> >> +Compatible cpus:       "arm,cortex-a57" (?)
> >
> > Any CPU with the security extensions or hypervisor extensions may
> > support PSCI. So far, implementations exist for at Cortex-A{7,15,53,57},
> > in addition to AEMs.
> 
> I'd like to capture this, but I don't have the information
> I need.  What I'm trying to do is use the actual matching
> "compatible" string here, and unfortunately there aren't many
> of them in the upstream tree (xenvm-4.2 and ex-common, and the
> latter doesn't even have a "cpus" node).  I can, from that,
> include "arm,cortex-a15" however.

I'm not sure I follow why that would be useful.

PSCI can be implemented on any CPU with the security extensions or the
virtualization extensions. The exact CPU doesn't matter. The code that
uses them is generic, and is already in the tree. Neither the standard
nor the kernel code care about the particular CPU.

> If you have specific values I can add please provide them.
> On the other hand, perhaps they should be added to the
> document when the code that uses them lands in the tree.

No PSCI code is going to rely on the CPU compatible string. In the case
of firmware bugs, we can add properties to the psci node or some PSCI
implementation detection. The CPU doesn't matter.

The DTBs or code which generates the DTBs which contain PSCI nodes might
not even be in the kernel tree (see Xen), and it I don't see why we
should add documentation to Linux when an external project implements
something that we already support.

> 
> >> +Related properties:    (none)
> >> +
> >> +Note:
> >> +This enable method is only available if a valid PSCI node[1] (compatible
> >> +with "arm,psci") is present in the device tree, and it defines a "cpu_on"
> >> +property.
> >> +
> >> +Example (contrived 2-core ARM Cortex-A57 64-bit system):
> >> +
> >> +       psci {
> >> +               compatible = "arm,psci";
> >> +               method = "smc";
> >> +               cpu_on = 0x1;
> >
> > Missing '<' and '>'.
> 
> Will fix.
> 
> >
> >> +       };
> >> +       cpus {
> >> +               #size-cells = <0>;
> >> +               #address-cells = <2>;
> >> +
> >> +               cpu@0 {
> >> +                       device_type = "cpu";
> >> +                       compatible = "arm,cortex-a57";
> >> +                       reg = <0x0 0x0>;
> >> +                       enable-method = "psci";
> >> +               };
> >> +
> >> +               cpu@1 {
> >> +                       device_type = "cpu";
> >> +                       compatible = "arm,cortex-a57";
> >> +                       reg = <0x0 0x1>;
> >> +                       enable-method = "psci";
> >> +               };
> >> +       };
> >> +
> >> +--
> >> +[1] arm/psci.txt
> >
> > It may be worth folding the existing PSCI binding document in with the
> > enable-method portion.
> 
> I'll see what I can do.

Cheers!

> 
> >> diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/qcom,gcc-msm8660 b/Documentation/devicetree/bindings/arm/cpu-enable-method/qcom,gcc-msm8660
> >> new file mode 100644
> >> index 0000000..b19f51c
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/qcom,gcc-msm8660
> >> @@ -0,0 +1,30 @@
> >> +======================================================
> >> +Secondary CPU enable-method "qcom,gcc-msm8660" binding
> >> +======================================================
> >> +
> >> +This document describes the "qcom,gcc-msm8660" method for enabling secondary
> >> +CPUs.  A "qcom,gcc-msm8660" enable method should only be used in the "cpus"
> >> +node, to apply to all CPUs.
> >> +
> >> +Enable method name:    "qcom,gcc-msm8660"
> >> +Compatible cpu:                "qcom,scorpion"
> >> +Related properties:    (none)
> >
> > From a look at the code, we need a node compatible with
> > "qcom,gcc-msm8660" somewhere in the tree (see scss_release_secondary).
> > It would be good to mention that.
> 
> I will incorporate something here.  I handled something similar
> for qcom,kpss-acc-v? but missed this one I guess.

It's easy to miss. It would be nice for the qcom guys to go over this
and make sure that it says what they think it should.

> 
> > [...]
> >
> >> diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/spin-table.txt b/Documentation/devicetree/bindings/arm/cpu-enable-method/spin-table.txt
> >> new file mode 100644
> >> index 0000000..aee3617
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/spin-table.txt
> >> @@ -0,0 +1,95 @@
> >> +================================================
> >> +Secondary CPU enable-method "spin-table" binding
> >> +================================================
> >> +
> >> +This document describes the "spin-table" method for enabling secondary CPUs.
> >> +A "spin-table" enable method can be used in either the "cpus" node or in
> >> +individual "cpu" nodes.
> >> +
> >> +Enable method name:    "spin-table"
> >> +Compatible cpus:       "arm,cortex-a57" (?)
> >
> > Any CPU with AArch64 may support this.
> 
> Again, I based the document on the *.dts and *.dtsi files
> present under arch/arm*/boot/dts, and in this case there
> isn't one that uses "spin-table".  The code existed though,
> as did some documentation, so I included it here.
> 
> I think what I'll do is parenthetically state what you said,
> i.e., "(any CPU with AArch64)" in cases like this, so the
> information is conveyed despite not having specific compatible
> string values.

Something like: "Compatible cpus: Any AArch64 CPU" would be fine. I'm
not sure I see the point of the parens.

> 
> >> +Related properties:
> >> +       - cpu-release-addr
> >> +               Usage:          required
> >> +               Value type:     <prop-encoded-array>
> >
> > Just say it's a 64-bit value, "prop-encoded-array" isn't all that
> > helpful.
> 
> Agreed.  I was just copying what was there already.
> I will fix it.

Sure. Fitting in makes sense.

A lot of the documentation we have is really vague, and
"prop-encoded-array" is a particularly bad example of a description that
provides no information whatsoever.

> 
> >> +               Definition:
> >> +                       A two cell value identifying a 64-bit memory location
> >> +                       used by the boot CPU to inform a secondary CPU it
> >> +                       should begin its kernel bootstrap.  Memory at this
> >> +                       location must initially be zeroed.
> >> +
> >> +Examples (contrived 4-core ARM Cortex-A57 64-bit systems):
> >> +
> >> +The first example uses the same enable method for all cores.
> >> +
> >> +       cpus {
> >> +               #size-cells = <0>;
> >> +               #address-cells = <2>;
> >> +               enable-method = "spin-table";
> >> +               cpu-release-addr = <0 0x20000000>;
> >
> > Linux currently expects this to be described per-cpu, and does not
> > support either of these properties this being defined in /cpus for
> > arm64.
> 
> I'll take a closer look at the code and will update this.
> I would much rather use a *real* (or at least close)
> example.  I made this out of whole cloth.

You could take a look at arch/arm64/boot/dts/rtsm_ve-aemv8a.dts, and
just munge the cpu-release-addr values to be unique.

> 
> > I would also very much like to discourage using a single release address
> > -- it means we can only throw all CPUs into the kernel pen, where some
> > may have to sit forever (breaking things like kexec). Ideally if a
> > system has to use spin-table the addresses should be unique.
> 
> That's fine with me.  I don't have the details of
> how this is supposed to work...

Sure. I'd be happy to add a description as to the problems as a
follow-up.

> 
> > So could we just have the example with unique addresses please?
> 
> No problem, I'll create a new one; I hope you'll
> verify that what I come up with is sane.

Will do.

> 
> > [...]
> >
> > Otherwise, this looks like a good first step. It would be nice to see
> > some qcom folk review the qcom documentation changes.
> 
> Yes it would.  Thank you very much for looking this over
> and providing feedback Mark.  I'll have a new version out
> later today.

Cool. Thanks for putting this together, and apologies for the long delay
on review.

Cheers,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux