On Wed, 2014-05-28 at 10:48 +0200, Linus Walleij wrote:
> On Wed, May 28, 2014 at 10:36 AM, Heiko Stübner <heiko@xxxxxxxxx> wrote:
> > Am Mittwoch, 28. Mai 2014, 10:15:43 schrieb Linus Walleij:
> >> On Tue, May 27, 2014 at 3:09 PM, Heiko Stübner <heiko@xxxxxxxxx> wrote:
> >> > Am Dienstag, 27. Mai 2014, 09:27:36 schrieb Ivan T. Ivanov:
> >> >> From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
> >> >>
> >> >> Add "power-source" property to generic options used for DT parsing files.
> >> >> This enables drivers, which use generic pin configurations, to get the
> >> >> value passed to this property.
> >> >
> >> > I think the main problem here is, that pinconf-generic.h defines the
> >> > power-
> >> > source as having a "custom format". With DT as a hardware description,
> >> > implementaton specific values do not work well - instead it should have a
> >> > regular unit-value.
> >> >
> >> > For the power-source I think volts could work well - as this is the main
> >> > use- case for pinctrl I know. The regulator-binding uses microvolts,
> >> > maybe it would be good use a similar unit.
> >>
> >> (...)
> >>
> >> > pcfg_1v8 {
> >> >
> >> > power-source = <1800000>;
> >> >
> >> > };
> >>
> >> I don't think this is what it's meant for actually. In this case the thing
> >> would be modeled as a regulator rather than some pin control option I
> >> guess?
> >>
> >> I think it's more like a selector, such as found on old amplifiers,
> >> input source A, B or C? So it's just some discrete number.
> >
> > as I said, you know this better than me ;-)
> >
> > I was thinking more of these io-voltages, where one can select between say 1.8
> > and 3.3V for the pins.
> >
> > I have this somewhere on my todo list for the rockchips too.
> >
> > So essentially the pinctrl driver [as it is a pin-group specific setting]
> > should just export regulators for these voltage settings, without touching the
> > pinconfig itself, right?
>
> Hm hm hm.
>
> I am a bit in the blue actually.
>
> I think we need to have a discussion with Mark Brown on how to
> handle this.
>
> We have previously had the case of MMC/SD level-shifters, where
> a certain setting gives a certain level of signals out, and another setting
> gives another level. Like two discrete levels.
>
> So we modeled that as a regulator provider inside the pin control
> driver eventually, see sh-pfc/pfc-sh73a0.c
>
> But this is different: it is the power of the pin itself.
>
> I can think of a "padring regulator" hooking in as part of the pin state
> but have no clear idea on how to actually do that. We need some
> coding I think.
>
In my case this is just a switch, which can select from different power
sources and these sources are external from the chip. So I can't know
a priory what the levels are and hard code them inside the driver.
Thanks,
Ivan
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
