Re: [PATCH v4] pci-rcar-gen2: add device tree support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 27, 2014 at 09:04:18PM -0600, Bjorn Helgaas wrote:
> [+cc Arnd]
> 
> On Tue, May 20, 2014 at 01:10:20AM +0400, Sergei Shtylyov wrote:
> > From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
> > 
> > Add device tree probing support to the 'pci-rcar-gen2' driver.
> > 
> > Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
> > [Sergei: numerous fixes/cleanups/additions]
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
> 
> I'd like to see an ack from Simon (since it changes pci-rcar-gen2.c) and
> Arnd (since he pointed out some issues with the devicetree binding).

Acked-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>

> 
> Bjorn
> 
> > ---
> > The patch is against the 'next' branch of Bjorn Helgaas' 'pci.git' repo.
> > 
> > Changes in version 4:
> > - added the descriptions for the #{address|size|interrupt}-cells and
> >   #interrupt-map[-mask] properties to the binding document;
> > - added the interrupt-related properties to the example;
> > - refreshed the patch.
> > 
> > Changes in version 3:
> > - added "renesas,pci-r8a7791" to the possible "compatible" property values;
> > - removed '#ifdef CONFIG_OF' around rcar_pci_of_match[] and hence of_match_ptr()
> >   invocation too;
> > - fixed trailing whitespace in the DT parsing code;
> > - removed the wrong "renessas," prefix from the binding document's file name;
> > - moved the PCI device sub-nodes from the board example to the SoC example;
> > - fixed labels in the board example;
> > - fixed grammar and punctuation in the binding document;
> > - reworded the changelog, fixed the subject.
> > 
> > Changes in version 2:
> > - merged the binding document from a separate patch;
> > - moved to the "bus-range" property parsing;
> > - added example to the binding document.
> > 
> >  Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt |   66 ++++++++++++++++
> >  drivers/pci/host/pci-rcar-gen2.c                        |   31 +++++++
> >  2 files changed, 95 insertions(+), 2 deletions(-)
> > 
> > Index: pci/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
> > ===================================================================
> > --- /dev/null
> > +++ pci/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
> > @@ -0,0 +1,66 @@
> > +Renesas AHB to PCI bridge
> > +-------------------------
> > +
> > +This is the bridge used internally to connect the USB controllers to the
> > +AHB. There is one bridge instance per USB port connected to the internal
> > +OHCI and EHCI controllers.
> > +
> > +Required properties:
> > +- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
> > +	      "renesas,pci-r8a7791" for the R8A7791 SoC.
> > +- reg:	A list of physical regions to access the device: the first is
> > +	the operational registers for the OHCI/EHCI controllers and the
> > +	second is for the bridge configuration and control registers.
> > +- interrupts: interrupt for the device.
> > +- clocks: The reference to the device clock.
> > +- bus-range: The PCI bus number range; as this is a single bus, the range
> > +	     should be specified as the same value twice.
> > +- #address-cells: must be 3.
> > +- #size-cells: must be 2.
> > +- #interrupt-cells: must be 1.
> > +- interrupt-map: standard property used to define the mapping of the PCI
> > +  interrupts to the GIC interrupts.
> > +- interrupt-map-mask: standard property that helps to define the interrupt
> > +  mapping.
> > +
> > +Example SoC configuration:
> > +
> > +	pci0: pci@ee090000  {
> > +		compatible = "renesas,pci-r8a7790";
> > +		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
> > +		reg = <0x0 0xee090000 0x0 0xc00>,
> > +		      <0x0 0xee080000 0x0 0x1100>;
> > +		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
> > +		status = "disabled";
> > +
> > +		bus-range = <0 0>;
> > +		#address-cells = <3>;
> > +		#size-cells = <2>;
> > +		#interrupt-cells = <1>;
> > +		interrupt-map-mask = <0xff00 0 0 0x7>;
> > +		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
> > +			      	 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
> > +			      	 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +		pci@0,1 {
> > +			reg = <0x800 0 0 0 0>;
> > +			device_type = "pci";
> > +			phys = <&usbphy 0 0>;
> > +			phy-names = "usb";
> > +		};
> > +
> > +		pci@0,2 {
> > +			reg = <0x1000 0 0 0 0>;
> > +			device_type = "pci";
> > +			phys = <&usbphy 0 0>;
> > +			phy-names = "usb";
> > +		};
> > +	};
> > +
> > +Example board setup:
> > +
> > +&pci0 {
> > +	status = "okay";
> > +	pinctrl-0 = <&usb0_pins>;
> > +	pinctrl-names = "default";
> > +};
> > Index: pci/drivers/pci/host/pci-rcar-gen2.c
> > ===================================================================
> > --- pci.orig/drivers/pci/host/pci-rcar-gen2.c
> > +++ pci/drivers/pci/host/pci-rcar-gen2.c
> > @@ -98,6 +98,7 @@ struct rcar_pci_priv {
> >  	struct resource io_res;
> >  	struct resource mem_res;
> >  	struct resource *cfg_res;
> > +	unsigned busnr;
> >  	int irq;
> >  	unsigned long window_size;
> >  };
> > @@ -312,8 +313,8 @@ static int rcar_pci_setup(int nr, struct
> >  	pci_add_resource(&sys->resources, &priv->io_res);
> >  	pci_add_resource(&sys->resources, &priv->mem_res);
> >  
> > -	/* Setup bus number based on platform device id */
> > -	sys->busnr = to_platform_device(priv->dev)->id;
> > +	/* Setup bus number based on platform device id / of bus-range */
> > +	sys->busnr = priv->busnr;
> >  	return 1;
> >  }
> >  
> > @@ -366,6 +367,23 @@ static int rcar_pci_probe(struct platfor
> >  
> >  	priv->window_size = SZ_1G;
> >  
> > +	if (pdev->dev.of_node) {
> > +		struct resource busnr;
> > +		int ret;
> > +
> > +		ret = of_pci_parse_bus_range(pdev->dev.of_node, &busnr);
> > +		if (ret < 0) {
> > +			dev_err(&pdev->dev, "failed to parse bus-range\n");
> > +			return ret;
> > +		}
> > +
> > +		priv->busnr = busnr.start;
> > +		if (busnr.end != busnr.start)
> > +			dev_warn(&pdev->dev, "only one bus number supported\n");
> > +	} else {
> > +		priv->busnr = pdev->id;
> > +	}
> > +
> >  	hw_private[0] = priv;
> >  	memset(&hw, 0, sizeof(hw));
> >  	hw.nr_controllers = ARRAY_SIZE(hw_private);
> > @@ -377,11 +395,20 @@ static int rcar_pci_probe(struct platfor
> >  	return 0;
> >  }
> >  
> > +static struct of_device_id rcar_pci_of_match[] = {
> > +	{ .compatible = "renesas,pci-r8a7790", },
> > +	{ .compatible = "renesas,pci-r8a7791", },
> > +	{ },
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, rcar_pci_of_match);
> > +
> >  static struct platform_driver rcar_pci_driver = {
> >  	.driver = {
> >  		.name = "pci-rcar-gen2",
> >  		.owner = THIS_MODULE,
> >  		.suppress_bind_attrs = true,
> > +		.of_match_table = rcar_pci_of_match,
> >  	},
> >  	.probe = rcar_pci_probe,
> >  };
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux