Hello Wolfram, No news from you regarding this patch series. Is there anything you want me to fix ? Otherwise It would be great to have this series merged, because the PMIC used on Allwinner's A31 boards are connected through this P2WI bus. Best Regards, Boris On 10/05/2014 11:46, Boris BREZILLON wrote: > Hello, > > This series adds support for the P2WI block used by some Allwinner > boards to interface with the AXP221 PMIC. > > Best Regards, > > Boris > > Changes since v3: > - update the DT bindings doc > - fix a comment that was no longer true > > Changes since v2: > - drop the initialization (switch from I2C to P2WI mode) part > - print devm_ioremap_resource err code > > Changes since v1: > - implement P2WI initilization > - implement P2WI bus frequency configuration > - implement address consistency check > - fix devm_request_and_ioremap return check > - rework the macro definitions > - fix typos > > [1] http://www.spinics.net/lists/linux-i2c/msg15066.html > [2] http://comments.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/8947 > Boris BREZILLON (2): > i2c: sunxi: add P2WI DT bindings documentation > i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support > > .../devicetree/bindings/i2c/i2c-sunxi-p2wi.txt | 41 +++ > drivers/i2c/busses/Kconfig | 12 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-sun6i-p2wi.c | 349 +++++++++++++++++++++ > 4 files changed, 403 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt > create mode 100644 drivers/i2c/busses/i2c-sun6i-p2wi.c > -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
